manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Weider
  6. •
  7. Home Gym
  8. •
  9. Weider 190 Tc Bench User manual

Weider 190 Tc Bench User manual

Other manuals for 190 Tc Bench

6

This manual suits for next models

2

Other Weider Home Gym manuals

Weider 831.150280 User manual

Weider

Weider 831.150280 User manual

Weider Tc 150 Bench User guide

Weider

Weider Tc 150 Bench User guide

Weider Power Flex D621 354.156350 User manual

Weider

Weider Power Flex D621 354.156350 User manual

Weider CLUB WEBE10660.0 User manual

Weider

Weider CLUB WEBE10660.0 User manual

Weider Pro 875 User manual

Weider

Weider Pro 875 User manual

Weider Pro 136 Bench User manual

Weider

Weider Pro 136 Bench User manual

Weider WESY93190 User manual

Weider

Weider WESY93190 User manual

Weider D471 COBRA User manual

Weider

Weider D471 COBRA User manual

Weider 184 Bench User manual

Weider

Weider 184 Bench User manual

Weider Flex Xt2/flex 2000 Plus User manual

Weider

Weider Flex Xt2/flex 2000 Plus User manual

Weider Flex 107 Wt Bench User manual

Weider

Weider Flex 107 Wt Bench User manual

Weider B241 User manual

Weider

Weider B241 User manual

Weider B460 Bench User manual

Weider

Weider B460 Bench User manual

Weider Tc 150 Bench Quick start guide

Weider

Weider Tc 150 Bench Quick start guide

Weider Pro power Stack 831.159832 User manual

Weider

Weider Pro power Stack 831.159832 User manual

Weider 190 Rx Bench User manual

Weider

Weider 190 Rx Bench User manual

Weider 215 Bench User manual

Weider

Weider 215 Bench User manual

Weider Cswb3 Bench User manual

Weider

Weider Cswb3 Bench User manual

Weider Cobra 400 Home Gym User manual

Weider

Weider Cobra 400 Home Gym User manual

Weider PRO 900 Quick start guide

Weider

Weider PRO 900 Quick start guide

Weider Body Works Pro 2.0 Bench User manual

Weider

Weider Body Works Pro 2.0 Bench User manual

Weider 138 User manual

Weider

Weider 138 User manual

Weider 8512 User manual

Weider

Weider 8512 User manual

Weider 240 Tc Bench User manual

Weider

Weider 240 Tc Bench User manual

Popular Home Gym manuals by other brands

T.D.S. 3501 Assembly instructions

T.D.S.

T.D.S. 3501 Assembly instructions

Body Solid EXM1950 Assembly instructions

Body Solid

Body Solid EXM1950 Assembly instructions

Horizon Fitness OXFORD 6 manual

Horizon Fitness

Horizon Fitness OXFORD 6 manual

Energetics Multi Trainer 5.1 owner's manual

Energetics

Energetics Multi Trainer 5.1 owner's manual

Precor Discovery Series owner's manual

Precor

Precor Discovery Series owner's manual

Matrix MG-PL Series Service manual

Matrix

Matrix MG-PL Series Service manual

Reebok Tbr2i Manuale d'istruzioni

Reebok

Reebok Tbr2i Manuale d'istruzioni

Pure Fitness 8526HE owner's manual

Pure Fitness

Pure Fitness 8526HE owner's manual

Bowflex Sport 001-6961 Assembly instructions

Bowflex

Bowflex Sport 001-6961 Assembly instructions

NordicTrack E8200 Competition Bench Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Bedienungsanleitung

Insportline RW600 user manual

Insportline

Insportline RW600 user manual

Body Solid GHYP-345 owner's manual

Body Solid

Body Solid GHYP-345 owner's manual

Evo TAHOE 5105 user manual

Evo

Evo TAHOE 5105 user manual

ParaBody 40 Assembly instructions

ParaBody

ParaBody 40 Assembly instructions

JLL Ventus Pro Air Power instruction manual

JLL

JLL Ventus Pro Air Power instruction manual

Trojan Colorado 370 user manual

Trojan

Trojan Colorado 370 user manual

Tunturi R25 owner's manual

Tunturi

Tunturi R25 owner's manual

Deltech Fitness DF102 Assembly instructions

Deltech Fitness

Deltech Fitness DF102 Assembly instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

Serial Number Decal (under seat)
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Model No. WEEVBE8909.0
Serial No.
Write the serial number in the
space above for reference.
www.iconeurope.com
USERʼS MANUAL
QUESTIONS?
If you have questions, or if there are
missing parts, please contact us:
Call: 08457 089 009
From Ireland: 00 (44) 53 9236102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5Q
UK
2
WARNING DECAL PLACEMENT
TABLE OF CONTENTS
WARNINGDECALPLACE ENT ..............................................................2
IPORTANTPRECAUTIONS .................................................................3
BEFOREYOUBEGIN .......................................................................4
PARTIDENTIFICATIONCHART ...............................................................5
ASSE BLY ...............................................................................6
ADJUST ENT ............................................................................11
EXERCISEGUIDELINES ...................................................................13
PARTLIST ...............................................................................14
EXPLODEDDRAWING .....................................................................15
ORDERINGREPLACE ENTPARTS ..................................................BackCover
This drawing shows the location(s) of the warning
decal(s). If a decal is missing or illegible, see
the front cover of this manual and request a
free replacement decal. Apply the decal in the
location shown. Note: The decal(s) may not be
shown at actual size.
WEIDER is a registered trademark of ICON IP, Inc.
3
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your weight bench before using your weight bench.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.
2.
Read all instructions in this manual
and all
warnings on the weight bench
before using
the weight bench. Use the weight bench only
as described in this manual.
3. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
4. The weight bench is intended for home use
only. Do not use the weight bench in a com-
mercial, rental, or institutional setting.
5. Keep the weight
bench
indoors, away from
moisture and dust. Place the weight
bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench
to mount, dismount, and use it.
6. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
7. Keep children under age 12 and pets away
from the weight bench at all times.
8. Keep hands and feet away from moving
parts.
9. Always wear athletic shoes for foot protec-
tion while exercising.
10. The weight bench is designed to support a
maximum user weight of 300 lbs. (136 kg)
and a maximum total weight of 510 lbs. (231
kg). Do not place more than 210 lbs. (95 kg),
including a barbell and weights, on the
weight rests. Do not place more than 70 lbs.
(32 kg) on the leg lever. Note: The weight
bench does not include a barbell or weights.
11. Before setting a barbell on the weight rests,
make sure that the weight rests are inserted
as far as possible and that they are turned to
the locked position.
12. Do not use a barbell that is longer than 6 ft.
(1.8 m) with the weight bench.
13. Always place equal amounts of weight on
both ends of the barbell when using it.
14. When adding or removing weights, always
keep some weight on both ends of the bar-
bell.
15. When using the leg lever, place a barbell
with the same amount of weight on the
weight rests to balance the bench.
16. When using the backrest in a level position
or an inclined position, make sure that the
backrest support is inserted completely into
the uprights and that it is turned to the
locked position.
17. If you feel pain or dizziness while exercising,
stop immediately and cool down.
IMPORTANT PRECAUTIONS
4
Backrest
Weight Rest
Upright
Backrest Support
Seat
Leg Lever
Weight Tube
BEFORE YOU BEGIN
ASSE BLED DI ENSIONS:
Height: 3 ft. 11 in. (119 cm)
Width: 2 ft. 6 in. (76 cm)
Depth: 5 ft. 2 in. (157 cm)
Lock Knob
Lock Pin
Thank you for selecting the new WEIDER®190 TC
weight bench. The weight bench offers a selection of
exercises designed to develop the major muscle
groups of the upper body. Whether your goal is to tone
your body, build dramatic muscle size and strength, or
improve your cardiovascular system, the weight bench
will help you to achieve the specific results you want.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
5
M6 Washer (22)
M10 x 135mm Bolt (23)
M10 x 63mm Bolt (25) M10 x 66mm Bolt (28)
M6 x 16mm
Screw (24)
M6 x 40mm Screw (32) M10 x 19mm Screw (5)
M10 Washer (30)
M10 Locknut (31)
M10 x 35mm Carriage Bolt (37)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot
find a part in the hardware kit, check to see if it has been preassembled.
6
1
36
1
31
31
37
1.
Attach a Base (36) to an Upright (1) with two
10 x 35mm Carriage Bolts (37) and two 10
Locknuts (31).
Attach the other Base (36) to the other
Upright (1) in the same way.
36
1
To make assembly easier, make sure
that you have read the assembly tips in
the box above.
ASSEMBLY
To make assembly easier, carefully read the
following information and instructions:
•Assembly requires two persons.
• Because of its weight and size, the weight bench
should be assembled in the location where it will
be used. ake sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• The following tools (not included) may be required
for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
7
3. Attach one end of the Crossbar (2) to two Joint
Plates (11, 35) with two 10 x 66mm Bolts (28)
and two 10 Locknuts (31). Do not tighten the
Locknuts yet.
Attach the other end of the Crossbar (2) in
the same way.
3
28
35
11
2
31
2
28
11
11
35
1
10
31
2. Orient one of the Uprights (1) so that the
Upright Cover (10) is on the side shown.
Next, orient a Left Joint Plate (35) and a Right
Joint Plate (11) as shown. Attach the Joint
Plates to the Upright (1) with two 10 x 66mm
Bolts (28) and two 10 Locknuts (31). Do not
tighten the Locknuts yet.
Repeat this step with the other Upright (1)
and the other oint Plates (11, 35), making
sure that they are oriented as shown.
35
1
8
5. Apply some of the included grease to an 10 x
63mm Bolt (25).
Attach the Frame (3) to the upper set of holes
in the bracket on the Crossbar (2) with the 10
x 63mm Bolt (25) and an 10 Locknut (31). Do
not overtighten the Locknut; the Frame must
pivot easily.
Next, tighten the Lock Knob (27) into the bracket
on the Crossbar (2) and into the Frame (3).
See the inset drawing. Insert the Lock Pin (38)
into the lower set of holes in the bracket on the
Crossbar (2).
5
6. Insert the Backrest Support (14) into a set of
holes in the Uprights (1). Rotate the Backrest
Support so that the locking pin is wrapped
around the Upright (see the inset drawing).
Next, insert a Weight Rest (15) into an Upright
(1). Rotate the Weight Rest so that the locking
pin is wrapped around the Upright.
Attach the other Weight Rest (15) in the
same way. Make sure that the Weight Rests
are at the same height.
See steps 2–4. Tighten the M10 Locknuts
(31) and the M10 x 19mm Screw (5) used in
these steps.
1
14
15
15
1
6
Locking
Pin
Locking
Pin
4
28
5
30
31
3
4
4. Attach the Front Leg (4) to the Frame (3) with
an 10 x 19mm Screw (5), an 10 x 66mm
Bolt (28), an 10 Washer (30), and an 10
Locknut (31). Do not tighten the Screw or the
Locknut yet.
2
25
27
3
Grease
31
Locking
Pin
38
2
9
8. Insert a Pad Tube (12) into the Leg Lever (6).
Slide two Foam Pads (13) onto the Pad Tube
(12), and then press two Pad Caps (34) into the
Pad Tube.
Attach the other Pad Tube (12), Foam Pads,
(13), and Pad Caps (34) in the same way.
6
13
13
13
34
34
34
34
13
12
12
8
9. Orient the Backrest (8) and the Backrest Tubes
(7) as shown.
Attach the Backrest Tubes (7) to the Backrest
(8) with four 6 x 40mm Screws (32) and four
6 Washers (22). Do not tighten the Screws
yet.
8
Wide
End
7
Holes
22
32
22
32
9
7. Apply grease to an 10 x 60mm Bolt (25).
Attach the Leg Lever (6) to the Front Leg (4) with
the 10 x 63mm Bolt (25) and an 10 Locknut
(31). Do not overtighten the Locknut; the Leg
Lever must pivot easily.
25
31
Grease
6
4
7
10
10. Apply grease to an 10 x 135mm Bolt (23).
Attach the Backrest Tubes (7) to the welded
tube on the Frame (3) with the 10 x 135mm
Bolt (23), two 10 Washers (30), and an 10
Locknut (31). Do not overtighten the Locknut;
the Backrest Tubes must pivot easily.
See step 9. Tighten the M6 x 40mm Screws
(32).
31 30
7
3
23
Grease
10
30
12. Make sure that all parts are properly tightened before you use the weight bench. The use of all remain-
ing parts will be explained in ADJUST ENT, beginning on page 11.
11. Attach the Seat (9) to the Frame (3) with four
6 x 16mm Screws (24). 9
3
24
11
Tube