Welcare PUREAIR WPA300 Instruction Manual

MODEL: WPA300
Instruction Manual & Warranty Information
Read Instructions Carefully Before Use
WPA300_Instruction-Manual_A5-working.indd 1WPA300_Instruction-Manual_A5-working.indd 1 12/8/21 1:26 pm12/8/21 1:26 pm

2. Welcare PureAir Household Air Purier
Model: WPA300
Thank you for purchasing this Welcare PureAir Household Air Purier
Please keep this instruction manual in a safe place where it is readily available.
Note: The illustrations in this manual may differ slightly from the product itself.
WPA300_Instruction-Manual_A5-working.indd 2WPA300_Instruction-Manual_A5-working.indd 2 12/8/21 1:26 pm12/8/21 1:26 pm

Instruction Manual & Warranty Information 3.
Contents
Important Safety Information . . . . . . . . . . . . . . . . . . 4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Air Quality Indicator . . . . . . . . . . . . . . . . . . . . . . 5
Box Contents . . . . . . . . . . . . . . . . . . . . . . . . 6
Welcare PureAir Household Air Purier Components . . . . . . . . . 6
Welcare PureAir Household Air Purier Display . . . . . . . . . . . 7
Filters and Functions . . . . . . . . . . . . . . . . . . . . . 7
Before Using the Air Purier. . . . . . . . . . . . . . . . . . . 9
Air Purier Filter Installation . . . . . . . . . . . . . . . . . . . 10
Replacement Accessories . . . . . . . . . . . . . . . . . . . 11
Using the Air Purier . . . . . . . . . . . . . . . . . . . . . 11
Filter Replacement . . . . . . . . . . . . . . . . . . . . . . 12
Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . 13
Air Quality Sensor. . . . . . . . . . . . . . . . . . . . . . .14
Cleaning the Pre-Filter (ONLY) . . . . . . . . . . . . . . . . . .14
Storage. . . . . . . . . . . . . . . . . . . . . . . . . . .14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 15
Warranty Information . . . . . . . . . . . . . . . . . . . . . 16
Warranty Form . . . . . . . . . . . . . . . . . . . . . . . . 17
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . 19
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . 20
WPA300_Instruction-Manual_A5-working.indd 3WPA300_Instruction-Manual_A5-working.indd 3 12/8/21 1:26 pm12/8/21 1:26 pm

4. Welcare PureAir Household Air Purier
Important Safety Information
Read this section thoroughly before using the product.
Please ensure you observe the safety instructions to avoid accidents,
injury and damage.
Intended purpose
The Welcare PureAir Household Air Purier removes contaminants from the air in
a room toimprove indoor air quality. Indoor air pollution comes mainly from pollen,
dust, harmful gasses including smoke, body odour and other substances which
can be a serious problem, causing dizziness, drowsiness, congestion, and
nausea. Clean, pure air is important to a person’s health and wellbeing.
This product is NOT a therapeutic device.
This product is not intended for use by persons (including children) with limited
physical, sensory, or mental abilities or lacking experience and/or knowledge,
unless they are supervised by a person responsible for their safety or have received
and understand the instructions/safety warnings for use of the product from this
person in advance.
Safety Warnings
• Keep the product and its components out of reach of children.
• Keep children away from the packaging material.
• Dispose of the plastic bag. Keep away from babies and children to avoid suffocation.
• DO NOT let children play with the product.
Warnings
• DO NOT drop or put heavy objects on the product.
• DO NOT allow the product to come into contact with any sharp objects, as this
could cause damage to the product.
• DO NOT attempt to open or disassemble the product.
• DO NOT expose to temperatures over 55°C.
• Only use in a 220-240V wall outlet to avoid overheating.
• If the supplied power cord is damaged, it must be replaced by the manufacturer, its
service agent, or a similarly qualied person to avoid a hazard.
• Clean the product with a damp soft cloth and mild detergent if required. DO NOT
use any harsh chemical cleaning agents. Dry with a soft cloth.
• Never use liquids such as water, detergents, or ammable solvents to clean the product.
• When cleaning the product, please disconnect from the power source.
• This product uses precision components. Position the product on an even, steady
surface to prevent it from falling or being damaged.
• The product should NOT be used for inside the kitchen or other areas where heavy
fat particles are present.
WPA300_Instruction-Manual_A5-working.indd 4WPA300_Instruction-Manual_A5-working.indd 4 12/8/21 1:26 pm12/8/21 1:26 pm

Instruction Manual & Warranty Information 5.
Important Safety Information - continued
• The product should NOT be used for ventilation or extraction purposes.
• Keep away from any wet areas.
• Keep away from any combustible material.
• Always keep at the product at least 1 metre away from the television or radio when in use.
• DO NOT plug the power plug in the same power socket as the television or radio.
• Keep the space surrounding the product unobstructed, ensuring 50cm clearance
on both sides of the air inlet and outlet and 10cm from the back of the product.
• DO NOT cover the air inlet and outlet.
Features
• 6 Point HEPA (H13) Air Purication System
• Suitable for large areas up to 40~50 m² (average size living room 25m²)
• Filters dust, pollen, smoke, germs, and bacteria
• Removes odours
• Touch panel display for easy operation
• Adjustable fan speed - 4 Levels (one button)
• Timing function 1hr - 4hr - 8hr
• Filter replacement reminder display
• Silent mode
• Night mode
• Low- noise operation
• Dust sensor & Air quality indicator (4 colours):
Blue-Perfect, Green-Good, Purple-Normal, Red-Bad
Air Quality Indicator
The air quality indicator reects the air quality conditions of the room.
Blue (PM2.5=0~50)
PERFECT
PERFECT
Green (PM2.5=50~100)
GOOD
GOOD
Purple (PM2.5=100~150)
N O RMAL
N O RMAL
Red (PM2.5=150~ )
BAD
BAD
PM2.5 = particles which have a diameter of less than 2.5 microns
Air Quality
Indicator
WPA300_Instruction-Manual_A5-working.indd 5WPA300_Instruction-Manual_A5-working.indd 5 12/8/21 1:26 pm12/8/21 1:26 pm

6. Welcare PureAir Household Air Purier
Box Contents
1 x Air purier (including 6 Point HEPA (H13) Air Purication System inside)
1 x Instruction Manual & Warranty Information
Welcare PureAir Household Air Purier Components
Air outlet
Air quality indicator
Air inlet (two sides)
Air quality sensor
Back cover
Front cover
Power cord
Handle
Photoresistance Photo-catalyst lter
Activated carbon lter
Efcient HEPA (H13) lter
Pre lter
Front cover
UV lamps
WPA300_Instruction-Manual_A5-working.indd 6WPA300_Instruction-Manual_A5-working.indd 6 12/8/21 1:26 pm12/8/21 1:26 pm

Instruction Manual & Warranty Information 7.
Welcare PureAir Household Air Purier Display
Filters and Functions
The 6 Point Air Purication System effectively puries the air, providing a healthy living
environment.
1. Pre-Filter
2. Efcient HEPA (H13) Filter
3. Activated Carbon Filter
4. Photocatalyst Filter
5. Ionizer (Anion generator)
6. 2 pcs UV Lights
Mode button
Function button
Power button
Timer button
Fan speed adjustment Reset button
4.5.6. 3. 1.2.
Non replaceable part
(housed within the product)
WPA300_Instruction-Manual_A5-working.indd 7WPA300_Instruction-Manual_A5-working.indd 7 12/8/21 1:26 pm12/8/21 1:26 pm

8. Welcare PureAir Household Air Purier
Filters and Functions - continued
1. Pre-Filter
Uses a micron mesh lter, which blocks 2.5mm particle matter > 99.9%. Air can
be cleaned effectively, preventing contaminants such as dirt, hair, pet fur, dander,
and course dust from entering the air purier. The Pre-Filter protects all the lters
and prolongs their life.
2. Efcient HEPA (H13) Filter
The rate of removing 99.9% of minor particles as small as 0.3 microns in
diameter from the air, preventing the spread of allergens and bacteria such as
pollen, smog, and germs.
3. Activated Carbon Filter
Used to remove common household contaminants such as odours, second-hand
smoke, and gas pollutants.
4. Photocatalyst Filter
Uses ultraviolet light to remove chemicals such as formaldehyde, toluene, xylene,
ammonia, TVOC and other pollutants.
5. Ionizer (Anion Generator)
Produces large amounts of negative ions (or anions) to remove airborne
pollutants from the air, eliminating odours with strong absorption. The negative
ions (or anions) will make bacteria lose their activity, rendering them harmless.
6. UV Lights
Combined with photocatalyst lter, UV light creates highly effective sterilisation
which kills a variety of common bacteria and germs.
WPA300_Instruction-Manual_A5-working.indd 8WPA300_Instruction-Manual_A5-working.indd 8 12/8/21 1:26 pm12/8/21 1:26 pm

Instruction Manual & Warranty Information 9.
Filters and Functions - continued
Note: 500v cold cathode UV lamp can be used safely and will not produce Ozone.
Before Using the Air Purier
• Before turning on the product for the rst time, remove the lter bags.
• Carefully remove all packaging materials and keep the enclosed documents in a
safe place.
• Keep the packaging, product, and its components out of reach of children.
• Check the product is intact. DO NOT use if broken.
• Before the initial use of the product, please install the lters correctly as per
instructions.
If any abnormalities are detected, please contact our service centre:
In Australia - 1800 807 464
In New Zealand - 0800 523 583
The allergens
Bacteria
WPA300_Instruction-Manual_A5-working.indd 9WPA300_Instruction-Manual_A5-working.indd 9 12/8/21 1:26 pm12/8/21 1:26 pm

10. Welcare PureAir Household Air Purier
Air Purier Filter Installation
1. Gently hold onto the groove of both side
of the front panel, gently pulling outwards
to remove.
2. Remove the lters and UV lamps from
the air purier.
3. Remove all the packaging from the lters
and UV lamps and place the Air Purier
on a dry, stable, horizontal position.
Dispose of the plastic bag. Keep away from babies and children
to avoid suffocation.
4. Place the UV lamps into the product by
holding each end of the UV lamp, gently
placing each of the needles into the metal
slot inside the product. Repeat with the
second UV lamp.
5. Place each of the lters back inside the air purier in the order indicated below,
ensuring the labels on the lters are facing outwards.
Note Do not
operate the air
purier without the
lters or UV lamps
reinstalled
6. Reinstall the font panel by aligning and inserting bottom
clips into the xed grooves on the base of the product
and gently push to shut. (right)
• The efcient HEPA (H13) Filter and Activated Carbon
Filter must be replaced every 12 months
• The Photocatalyst Filter must be replaced every 3 years
Note Do not operate the air purier without the lters or UV lamps securely reinstalled.
Photo-catalyst lter
Activated carbon lter
Efcient HEPA (H13) lter
Pre lter
Front cover
1 2 3 4
WPA300_Instruction-Manual_A5-working.indd 10WPA300_Instruction-Manual_A5-working.indd 10 12/8/21 1:26 pm12/8/21 1:26 pm

Instruction Manual & Warranty Information 11.
Replacement Accessories
Replacement accessories can be purchased online or by contacting us directly:
Australia: 1800 807 464 www.welcare.com.au
New Zealand: 0800 523 583 www.jadavey.co.nz
Part Code Part Name
FIL3001-PRE
Pre-Filter
FIL3001-HP HEPA (H13) Filter
FIL3001-AC Activated Carbon Filter
FIL3001-PH Photocatalyst Filter
AP3001SP-UV 2 pcs UV Lights
Using the Air Purier
Standby:
Insert the plug of Air Purier into power source. The buzzer will ring, and all the
indicators will light up and ash twice detecting the air quality automatically.
All indicators will then stop ashing leaving the Air Purier in Standby Mode
and the RED indicator illuminated.
Power On/Off:
Tap the Power icon to switch the air purier ON defaulting to Auto Mode.
The BLUE indicator light will illuminate.
Tap again to switch the power OFF leaving the Air Purier in Standby Mode.
The RED indicator light will illuminate
.
Mode:
Auto Mode: When selecting the Auto Mode, the Air Quality
Indicator illuminates, slowly ashing BLUE, RED, PURPLE, GREEN
and Fan Speed 2illuminates for 30 seconds while detecting the air
quality of the room. The Auto Mode will select the most appropriate
fan speed required.
Silent Mode: Tap the Mode icon to choose Silent Mode. The fan speed
will change to level 1 operating at a low noise level.
Night Mode: A built-in radial sensor will sense the strength of the light in
the room automatically. If the room is dark, all lights of the Air Purier will be
dimmed and will change to Silent Mode
.
WPA300_Instruction-Manual_A5-working.indd 11WPA300_Instruction-Manual_A5-working.indd 11 12/8/21 1:26 pm12/8/21 1:26 pm

12. Welcare PureAir Household Air Purier
Using the Air Purier - continued
Speed:
Tap the fan Speed Icon
1,2,3 or 4 times to adjust
the air ow. The BLUE
indicator light will illuminate:
Function:
Anion: Tap the Function icon once to choose the Anion function.
The BLUE indicator light will illuminate Anion.
UV: Tap the Function icon again to choose the UV (Ultraviolet
Light) function. The
BLUE indicator light will illuminate UV.
Tap the Function icon a third time to choose both the Anion and
UV function. The
BLUE indicator light will illuminate Anion and U V.
Time:
Tap the Time Icon 1,2,3 or 4 times to
adjust timer.
The
BLUE indicator light will illuminate:
Note: If no timer is set, the air purier
will continuously operate until it is
manually switched off.
Reset:
Air Quality Indicator: Tap the Reset icon to turn Air Quality
indicator ON/OFF.
Reset Filter: After replacing the air lter, tap the Reset button for
at least 5 seconds.
Note: This function is available after the repalcement of the lters.
Filter Replacement
• The Reset Button illuminates and ashes slowly (RED when in Standby Mode
and BLUE when the unit is working) as a reminder to replace the 2 lters (HEPA
13 Filter and Activated Carbon Filter). These lters will need replacing after
approximately 1600 hours of use or up to 1 year.
• The Photo-Catalyst Filter needs replacing once every 3 years ONLY, or after
approximately 2,000 hours of use, (based on an average use of 8 hours a day - 7
days a week) or if exposed to direct sunlight for more than 2 hours.
WPA300_Instruction-Manual_A5-working.indd 12WPA300_Instruction-Manual_A5-working.indd 12 12/8/21 1:26 pm12/8/21 1:26 pm

Instruction Manual & Warranty Information 13.
Filter Replacement - continued
Note: the air purier will still work when the Reset Button indicator light is ashing.
• Turn off the power from the product and unplug from the power source before
replacing the lters.
• Remove all packing from each of the new lters and dispose of as per instructions.
• Place the lters into the product in the correct order (refer page 10).
• Align and insert the bottom clips into the hollows at the base of the product and
gently push to shut.
• After replacing the air lters, insert the plug back into the power source.
• Press the Reset Mode and hold for 5 seconds. The air purier will then reset.
To ensure a healthy environment, the lters should always be changed when the
product indicates.
Cleaning and Maintenance
• When cleaning, always turn off the power and disconnect from the power source.
• Clean the outside of the product with a damp cloth and mild detergent regularly to
prevent dust to accumulate on the product.
• Use a soft dry cloth to clean the inlet and outlet.
• DO NOT put the product in water or any other liquids.
• DO NOT use any harsh chemical cleaning agents including bleach or alcohol.
• If the product is being used in an extremely dusty environment, clean more regularly.
• ONLY the Pre-Filter can be cleaned with water. See following instructions.
The other lters CANNOT be cleaned.
WPA300_Instruction-Manual_A5-working.indd 13WPA300_Instruction-Manual_A5-working.indd 13 12/8/21 1:26 pm12/8/21 1:26 pm

14. Welcare PureAir Household Air Purier
Air Quality Sensor
1. Use a soft brush to clean the protective cover of inlet/outlet of
the Air Quality Sensor.
2. Remove the protective cover of the Air Quality Sensor.
3. Use a damp cotton bud to clean inlet/outlet of the Air Quality
Sensor.
4. Dry inlet/outlet of the Air Quality Sensor with a dry cotton bud.
5. Replace the protective cover.
Cleaning the Pre-Filter (ONLY)
• Gently hold onto the groove of both side of the front panel, gently pull outwards to remove.
• Remove the Pre-Filter from the product.
• Use a soft-clean brush or a low powered vacuum cleaner to remove any particles.
• Use water and mild detergent to clean thoroughly.
• Let dry completely and then place back inside product, securely clicking into place.
• Place the front panel back on the product as per instructions (page 10).
Storage
• Wipe away any dirt and dust from the product.
• Store in a safe cool dry place, away from children as per Safety Warnings.
• Ensure the product is always stored in an upright position.
• DO NOT place any heavy objects on the product.
• If the product is not going to be used for a long period, turn off and unplug from the
power source.
Air quality sensor
2
3
1
WPA300_Instruction-Manual_A5-working.indd 14WPA300_Instruction-Manual_A5-working.indd 14 12/8/21 1:26 pm12/8/21 1:26 pm

Instruction Manual & Warranty Information 15.
Troubleshooting
Problem Possible Cause Solution
The Air Purier
does not turn
on.
The machine plug and power plug
are not inserted into the power
source correctly.
Insert into the power source correctly.
The front panel may not be installed
securely. Reinstall the front panel.
The power plug may be damaged. Contact our customer service centre.
The fan does
not work.
The product inlet or outlet may be
blocked.
Remove any objects away from the inlet/
outlet area.
Plastic packaging may not have
been removed.
Remove any plastic packaging from the
lter.
The product had been put on an
uneven surface.
Place the product on an even, stable
surface.
Loose or foreign particles inside the
product. Contact our customer service centre.
Performance is
poor or is
not performing
at its optimal
purication
performance.
The area around the product is not
clear of objects.
Remove any objects around
the product.
Filters may need replacing. Replace the lter as per instructions.
Washable Pre-Filter may be dirty. Wash Pre-lter as per instructions.
Not enough space around the
product.
Ensure the product has at least 50cm
clearance on both sides of the air
inlet and the outlet and at least 10cm
clearance on the back of the product.
The lters have not been installed
or installed correctly.
Ensure the lter are installed as per
instructions.
Exceeding the expected coverage
area.
Ensure the product is in a suitable sized
room.
If the problem is not solved by the troubleshooting guide or you have any queries,
please contact our service centre:
In Australia - 1800 807 464
In New Zealand - 0800 523 583
DO NOT attempt to open or repair the product yourself.
WPA300_Instruction-Manual_A5-working.indd 15WPA300_Instruction-Manual_A5-working.indd 15 12/8/21 1:26 pm12/8/21 1:26 pm

16. Welcare PureAir Household Air Purier
Warranty Information
PRODUCT WARRANTY
Please register your warranty information at: AUS - www.welcare.com.au
NZ – www.jadavey.co.nz
This Welcare PureAir product is warranted to be free of manufacturing defects for 1 year
from the date of purchase*. This warranty is void if the product is modied or altered, is
subject to misuse or abuse, damaged in transit or lack of responsible care, is dropped, if
damage occurs by reason of failure to follow the written instruction booklet, or if product
repairs are carried out without authority from J.A. Davey Pty Ltd.
We will repair, or at our option replace free of charge, any parts necessary to correct material
or workmanship, or replace the entire product and return to you during the period of the
warranty. Otherwise, we will quote for any repair which will be carried out on acceptance of
our quotation. The benets conferred by this warranty are in addition to all other rights and
remedies in respect of the product, which the consumer has under the trade practices act
and other state or territory laws in Australia and New Zealand.
Our goods come with guarantees that cannot be excluded under Australian and New
Zealand Consumer Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
*Please note the accessories are not covered under warranty.
BEFORE YOU SEND IN YOUR PRODUCT FOR SERVICE
Before sending in your product for service, please take a few minutes to do the following:
• In your instruction manual, read the troubleshooting section that describes common
errors, their cause and remedies. Product instruction manuals can be downloaded online.
• Contact Welcare customer service. Our staff are trained to assist you with most issues
you may have experienced, without the need to send your product in for service.
PLEASE CALL OUR TOLL FREE NUMBER:
IN AUSTRALIA: IN NEW ZEALAND:
Free call: 1800 807 464 Free call: 0800 523 583
SENDING IN YOUR PRODUCT FOR SERVICE
1. Should repair be needed within the warranty period, enclose the cut-off section of the
warranty form and your proof of purchase receipt. Please ensure all relevant details
are completed before sending your product in for service. Please ensure your contact
details are still current and include a brief description of the problem you are experiencing
together with your purchase receipt.
2. Include the product with all product components in your package. This is extremely
important, so our repair technicians can make the correct diagnosis with any problems.
3. Please return the product and warranty form at your cost to:
IN AUSTRALIA
J A DAVEY PTY LTD
Welcare Repairs
PO Box 84
Port Melbourne
Victoria, Australia 3207
IN NEW ZEALAND
BV Medical
Welcare Repairs
Unit 7, 110 Mays Road
Onehunga
Auckland, New Zealand 1061
WPA300_Instruction-Manual_A5-working.indd 16WPA300_Instruction-Manual_A5-working.indd 16 12/8/21 1:26 pm12/8/21 1:26 pm

Instruction Manual & Warranty Information 17.
Warranty Form
PLEASE RETAIN THE WARRANTY INFORMATION.
RETURN THIS PORTION ONLY WHEN YOU RETURN YOUR PRODUCT FOR REPAIR UNDER WARRANTY.
NAME:
ADDRESS:
POSTCODE: DAYTIME PHONE:
EMAIL:
MODEL: DATE OF PURCHASE: / /
PLEASE ATTACH PROOF OF PURCHASE
RETAILER’S NAME:
RETAILER’S ADDRESS:
POSTCODE:
BRIEF DESCRIPTION OF PROBLEM YOU ARE EXPERIENCING:
WARRANTY IS VOID UNLESS THE ABOVE INFORMATION IS COMPLETED
AND CORRECT.
WPA300_Instruction-Manual_A5-working.indd 17WPA300_Instruction-Manual_A5-working.indd 17 12/8/21 1:26 pm12/8/21 1:26 pm

18. Welcare PureAir Desktop Air Purier
WPA300_Instruction-Manual_A5-working.indd 18WPA300_Instruction-Manual_A5-working.indd 18 12/8/21 1:26 pm12/8/21 1:26 pm

Instruction Manual & Warranty Information 19.
Technical Data
Product Name Welcare PureAir Household Air Purier
Model Number WPA300
Power 55W
Input 220-240V
Frequency 50Hz
Coverage Area 40~50m2
CADR 310m3/h
Purication System
6 Stage Air Purication System
1. Pre-Filter
2. Efcient HEPA (H13) Filter
3. Activated Carbon Filter
4. Photocatalyst Filter
5. Anion
6. 2 pcs UV Lights
Noise Level 60dB(A)
Operating Conditions
Temperature:0˚C to 40˚C
Humidity:≤70% RH (non-condensing)
Atmospheric Pressure: 860hPa-1060hPa
Storage/ Transport
Conditions
Temperature:-10˚C to 55 ˚C
Humidity:≤90% RH (non-condensing)
Atmospheric Pressure: 860hPa-1060hPa
Dimensions 402x187x624mm (main body only, out of packaging)
Weight Gross 8.6kg (main body)
Materials ABS + PP
Contents Air purier (including 6 pcs lter inside), user manual
and warranty information
WPA300_Instruction-Manual_A5-working.indd 19WPA300_Instruction-Manual_A5-working.indd 19 12/8/21 1:26 pm12/8/21 1:26 pm

20. Welcare PureAir Household Air Purier
IN AUSTRALIA:
J A DAVEY PTY LTD
Telephone: [phone]
Website: www.welcare.com.au
IN NEW ZEALAND:
J A DAVEY LTD
C/- Healthcare Logistics
Telephone: [phone]
Website: www.jadavey.co.nz
Should you require any further information
please do not hesitate to contact us.
Disposal
At the end of its life, please treat this product as electronic waste and
dispose of responsibly according to current local regulations.
Made in China
V08/21
WPA300_Instruction-Manual_A5-working.indd 20WPA300_Instruction-Manual_A5-working.indd 20 12/8/21 1:26 pm12/8/21 1:26 pm