
Bluetooth connection:
1. Turn the power button to “ON”, The LED light turn blue and twinkle quickly and beep twice
2. Activate Bluetooth of mobile phone and search for device name “PULSE ” then connect it. The blue
LED light twinkle slowly and beep third times once connected successfully
3. Play the music from your mobile phone and enjoy.
4. Press Forward or Backward button on the devices or on Mobile phones to select songs you like.
5. Press Play/Pause button on the devices or on Mobile phones to play/stop the music
6. Use the Bluetooth device to adjust volume up and down. Or long press to Forward or Backward button
to adjust volume up and down.
Playing music from USB disk & TF card:
1. Turn the Power button to “ON”.
2. Insert TF card or USB flash disk into slot, the music stored will be played automatically and blue LED
light always keep lighting.
3. Under playing mode, short press Forward or Backward to select songs you like, Or long press to
Forward or Backward button to adjust volume up and down.
4. PLAY/PAUSE to play or pause.
5. Please turn the Power button to “OFF” while without use.
Remark: Under Bluetooth playing mode, insert TF card or USB will disconnect the Bluetooth and switch the
playing from USB or TF card. You can press the MODE button to switch to Bluetooth mode again.
How to Use FM Radio:
1. Under FM radio state, the audio cable provided treat as antennal. Please Insert the audio cable to get
the best FM signal before using.
2. Turn the power button to “ON”, press the “MODE” button to switch to FM radio state.
3. Under playing mode, short press “Play/pause” button to auto search the FM Channel and store it
automatically.
4. Press Forward or Backward button to change the stored FM channel.
Colorful LED display and off:
This unit will display 7 color bright pulsating light when music is on. To turn light off, please push the
Play/Pause button for 5 seconds.
AUX-IN:
For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect
from the device’s “Line Out” to the “Aux In” of this devices. Then press the “MODE” button to switch to
AUX-IN state. Enjoy…
When using an external device, all functions will be controlled by the external devise except the
“Play/pause” button.