Well SPKR-BT-JUMP-WL User manual

INSTRUCTION MANUAL
PORTABLE BLUETOOTH SPEAKER
Thank you for choosing WELL. Please read carefully the following instructions and keep
them within reach.
Reorder No: SPKR-BT-JUMP-WL

To ensure correct operation and avoid damage, please read this user manual carefully
before using this product.
FEATURES:
Output very clear sound and dynamic sound effect
TWS function, pair two speakers together wirelessly to experience true stereo sound
With A2DP Bluetooth, wireless stream music from any Bluetooth-enabled device such
as your mobile phone, notebook, iPhone or iPad
RGB lighting
Secure simple pairing for user-friendly operating
10 meters operating range
USB support
FM radio
Line-in function, suitable for PC, MID, TV and other audio devices
Built-in lithium rechargeable battery 1500mAh
Carry Handle
PRODUCT DETAILS:
1. TWS button 2. Power On/Off
3. Forward/Volume Up 4. AUX IN
5. Charging Port 6. USB Port
7. LED Indicator 8. Mode Button
9. Play/Pause Button 10. Backward / Volume down

Bluetooth:
Turn the power button to “ON”, the RGB light turn on automatically, the LED light turn
blue and blink quickly, then enter Bluetooth mode and make a tone “Bluetooth Device
Ready To Pair”.
Activate Bluetooth of mobile phone and search for device name “BT-Jump” then
connect it. The blue LED light blink slowly and make a tone “Bluetooth Device
Connected Successfully” once connected.
Play the music from your mobile phone and enjoy.
Long press Forward or Backward button on the device or operate on Mobile phones to
select songs you like.
Press Play/Pause button on the device or on Mobile phones to play/pause the music.
Short press Forward or Backward button to adjust volume up and down. Or adjust the
mobile phone’s volume.
Playing music from USB:
Turn the Power button to “ON”, the RGB light turn on automatically.
Insert USB flash disk into slot, the speaker will make a tone “Music Play Mode”, and
play the stored music automatically.
Under playing mode, long press Forward or Backward button to select songs you like,
short press to adjust the volume up and down.
Press Play/Pause to play or pause.
Remark: Under Bluetooth playing mode, insert USB disk will disconnect the
Bluetooth and switch to play the USB disk. You can press the MODE button to switch
to Bluetooth mode again.
FM Radio:
Under FM radio state, the audio cable provided treat as antenna. Please Insert the audio
cable to get best FM signal before using.
Turn the power button to “ON”, press the “MODE” button, the speaker will prompt
“The Radio Mode” when entering FM state.
Under playing mode, short press “Play/Pause” button to mute the speaker, long press
“Play/Pause” button to auto search the FM Channel and store it automatically.
Long-press Forward or Backward button to change the stored FM channel.
AUX-IN:
For other compatible music devices or your MP3/MP4 players, use the supplied audio
line cable to connect from the device’s “Line Out” to the “Aux In” of this device to
Enjoy playing music.
Under any playing mode, when you use the audio cable to connect the device, it will
auto-switch to the AUX mode.
Under AUX mode, all functions can be controlled by external device.

Remarks:
When an audio cable is connected to the device, you cannot switch to Bluetooth mode
by pressing the Mode button.
When an audio cable is connected to the device, you can press “TWS” button to make
TWS connection under AUX mode.
TWS Function:
Turn on two identical speakers you want to pair, both under BT mode. Only need to set
up one of the two units.
Press “TWS” button, speaker will make a tone “di” to start pairing, and make “di” voice
for 3 times once successfully paired.
Make Bluetooth connection with your mobile phone to play music by the two paired
Speakers to create more powerful surround sound effect.
When you want to exit the TWS mode, press “TWS” button again to exit the TWS
function.
Once two units paired with TWS, when they both are turned on next time within
effective range, they can be automatically paired again (When two units TWS
connected, if you manually operate to disconnect the TWS connection, next time when
you turn on the two units, they will not automatically paired again) .
Remark:
Under Bluetooth TWS mode, if you connect your mobile phone to the unit (you
operated “TWS” button at beginning) via an audio cable, it will start to play AUX via
TWS function.
Remarks:
Long-press the Power button to turn the speaker on, short-press the Power button to
turn the speaker off.
To turn the RGB light on/off, please long press the Mode button.
When the speaker Bluetooth connected with one mobile device, user can long press the
TWS button to disconnect the previous device, then make Bluetooth connection with
another mobile device.
Default volume is at 50% status of max volume.
When battery voltage low, the speaker will prompt “Battery Is Low, Please Recharge
In Time”.
How to charge:
The charger is not included in the accessories. Please use a standard 5V/1~2A charger
to charge this device, and we are not responsible for any damage caused by using other
charger.
Power off the unit, put the provided charge cable into the charge slot of unit, connect
the other end to PC or other charger with 5V output.
Charge time should be 2-4 hours. The light is red while charging, and the indicator light
will switch off when full charged.

In order to prolong the life of battery, please do not charge more than 8 hours.
The unit does not have power bank function, it is forbidden to charge other device via
this unit or to connect other device via a USB cable.
IMPORTANT:
When playing music during charging, please put the volume to middle, because for
some music with heavy bass, the charger may not be able to afford the high current
temporarily under the maximum volume.
Warning:
•Don’t use/store this product in extreme temperatures.
•Please keep the product away from anything that generates heat, such as radiators,
stoves, etc.
•In order to have hearing protection and an extended speaker life, avoid listening to
songs on maximum volume.
•When cleaning the product, use a soft dry cloth. For more severe stains, please dampen
the cloth with water only. Anything else has the chance of dissolving the paint or
damaging the plastic.
SPECIFICATIONS:
Bluetooth version: V5.0+BR+EDR+BLE
Speaker Size: 3 inch
Output: 8.5W, 4Ω
Battery Capacity: 1500mAh
Frequency Response: 120Hz-15kHz
Playtime at max volume: 1.5H
Product size: 278(L) *117(W) *156(H) mm
ACCESSORIES:
Charging cable, Audio cable, User Manual
Waste electrical and electronic equipment are a special waste
category, collection, storage, transport, treatment and
recycling are important because they can avoid environmental
pollution and are harmful to health. Submitting waste
electrical and electronic equipment to special collection
centers makes the waste to be recycled properly and protecting
the environment. Do not forget! Each electric appliance that
arrives at the landfill, the field, pollutes the environment!
Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. [phone]*
of[email protected], www.vitacom.ro