1. LED
2. Housing
3. Adjustable Bracket
4. USB input/output
5. Mode switch
6. Battery Level Indicator（100%/75%/50%/25%）
Operating Instruction
Please read these instructions carefully before use.
Physical injury or property damage may result unless directions are followed. Save these instructions for
further reference.
Warning: The LED light is very bright. Do not look directly into the light beam or point the light beam
at others.
Operating
• Press the MODE switch to turn on the LED Work Light. It shows a fully-charged battery (all indicators lit
up).The number of Battery Indicators lit up shows the amount of charge.
• Press the MODE switch repeatedly to select from the available modes:
High (100% power)→Medium (50% power)→SOS signal (3 short flashes,3 long flashes,3 short
flashes)→Flash→OFF
Recharging the LED Rechargeable Work Light
The LED Rechargeable Work Light can be charged using the USB cable.
NOTE: Before initial use, charge the LED Rechargeable Work Light for at least 5 hours
