Wellis CITYLIFE User manual

USER MANUAL FOR SPA
CITYLIFE
/CONTROL SYSTEMS /KEYPADS /ACCESSORIES /

Introduction … … … … … … … … … … … … … … … … … … … … … … … … 2
Safety instructions … … … … … … … … … … … … … … … … … … … … … … … 3
Basic Functions … … … … … … … … … … … … … … … … … … … … … … … … 5
Connection diagram
Malaga Life … … … … … … … … … … … … … … … … … … … … … … … 6
Lima Life … … … … … … … … … … … … … … … … … … … … … … … … 7
Palermo Life … … … … … … … … … … … … … … … … … … … … … … … 8
Lugano Life … … … … … … … … … … … … … … … … … … … … … … … 9
Manhattan Life… … … … … … … … … … … … … … … … … … … … … … … 10
Vienna Life … … … … … … … … … … … … … … … … … … … … … … … … 11
Budapest Life … … … … … … … … … … … … … … … … … … … … … … … 12
Prague Life… … … … … … … … … … … … … … … … … … … … … … … … 13
Firenze Life… … … … … … … … … … … … … … … … … … … … … … … … 14
Initial installation … … … … … … … … … … … … … … … … … … … … … … … 15
Maintenance … … … … … … … … … … … … … … … … … … … … … … … … 19
Spa chemical treatment … … … … … … … … … … … … … … … … … … … … … 20
Jet Directions
Malaga Life … … … … … … … … … … … … … … … … … … … … … … … 23
Lima Life … … … … … … … … … … … … … … … … … … … … … … … … 24
Palermo Life … … … … … … … … … … … … … … … … … … … … … … … 25
Lugano Life … … … … … … … … … … … … … … … … … … … … … … … 26
Manhattan Life… … … … … … … … … … … … … … … … … … … … … … … 27
Vienna Life … … … … … … … … … … … … … … … … … … … … … … … … 28
Budapest Life … … … … … … … … … … … … … … … … … … … … … … … 29
Prague Life… … … … … … … … … … … … … … … … … … … … … … … … 30
Keypad functions … … … … … … … … … … … … … … … … … … … … … … … 31
User interface - in.k300 … … … … … … … … … … … … … … … … … … … … … … 42
Other accessories - The Heat Pump (optional) … … … … … … … … … … … … … … … … 45
Smart step manual (optional) … … … … … … … … … … … … … … … … … … … … 49
Other accessories
Ozone … … … … … … … … … … … … … … … … … … … … … … … … … 63
in.grid … … … … … … … … … … … … … … … … … … … … … … … … … 64
in.touch 2 … … … … … … … … … … … … … … … … … … … … … … … … 65
Wiring diagram - W3000 … … … … … … … … … … … … … … … … … … … … … … 89
Breaker setting … … … … … … … … … … … … … … … … … … … … … … … … 91
Common hardware issues … … … … … … … … … … … … … … … … … … … … … 93
TABLE OF CONTENTS

Congratulations on your new product!
Outside work and family the enjoyment of quality life and calm moments plays an important role in the life of a 21st century
man. An evening bath in the spa or tub alone or in company can give you the opportunity to lose track of time and your body
and soul can relax. From the world of rationality we get into the world of senses where the cosseting atmosphere of the water
provides the perfect conditions for relaxation.
Our design engineers utilised the experiences of the ancient Eastern massage culture and the modern findings of Western
hydrotherapy to create spas providing the perfect massage experience.
Develop a peaceful space for relaxation with your product in your home and join the group of the few who seek a positive
impact on their environment by establishing internal harmony.
Dive into your spa and enjoy the gently flowing water!
INTRODUCTION
Aeware®, Gecko®, and their respective logos are Registered Trademarks of Gecko Alliance Group.
in.yt™, in.ye™, in.yj™, in.touch™, in.stream 2™ , DJS ™, in.k110™, in.k120™, in.k361™, in.k1001™, in.clear™,
and their respective logos are Trademarks of Gecko Alliance Group.

All other product or company names that may be mentioned in this publication are tradenames, trademarks or registered trademarks
of their respective owners.
2

FOR YOUR SAFETY PLEASE ALWAYS PERFORM THE
FOLLOWING PRECAUTIONS. IF YOU DO NOT FOL-
LOW THE WARNINGS AND INSTRUCTIONS, ITEMS
MAY GET DAMAGED, YOU MAY GET INJURED,
OR YOU MAY SUFFER FATAL INJURY. IMPROPER
INSTALLATION AND OPERATION INVALIDATES THE
WARRANTY.
Initial safety warnings
The spa must be powered through a residual current device
(RCD) with a current release not exceeding 30mA.
The devices and parts which contain active parts – except
those which are powered from protective extralow voltage
not exceeding 12V – must be inaccessible from the spa.
ABOUT THE ENVIROMENTALLY SAFE WATER
DRAINING
The spa must be powered through a residual current device
(RCD) with a current release not exceeding 30mA.
The devices and parts which contain active parts – except
those which are powered from protective extralow voltage
not exceeding 12V – must be inaccessible from the spa.
About the enviromentally safe water draining
The water temperature in the spa should never exceed
40°C (104°F). The water temperature is considered safe for
a healthy adult at 36 to 38°C. Lower water temperature is
recommended for younger children or when the spa is used
for more than 10 minutes.
Spa heat can cause hyperthermia!
Symptoms: drowsiness, heaviness
Children under 14 years of age can only use and operate the
products mounted with hydromassage system under adult
supervision.
People with heart disease, low or high blood pressure,
circulatory disorders, diabetes, and excessive weight should
consult their physician prior to using the spa.
Consumption of alcohol or drugs while using the spa greatly
increases the chance of fatal overheating.
A person taking medications should consult a doctor before
using the spa as some medicines may cause drowsiness
while others may affect the heart rate, blood pressure, and
circulation.
Persons who suffer from infectious diseases should not use
the spa.
Because high water temperature poses a high risk to the
fetus and may cause serious fetal damage we advise that
(potentially) pregnant women do not use the spa at a water
temperature higher than 38°C. Wet surfaces can be slippery.
Note and warn your child about this when entering and
leaving the spa. To avoid injury carefully get into and out of
the spa.
Do not use the spa if the suction cover is damaged or missing.
Never place any electric device within a 2-meter radius of the
spa - it can cause electrical shock. Electric devices fallen into
water may cause death, electric shock, or serious personal
injuries.
It is prohibited to remove the panels while using the spa.
Water treatment should be carried out with caution. Improp-
erly chemically treated* water may cause skin irritation.
When the spa is not in use, cover the spa with the cover to
prevent ultraviolet radiation causing damage to the product.
Do not allow your child to climb on the thermo cover when it
is on the water-filled spa.
Do not remove any suction sealing. Do not operate the spa if
the suction sealing is broken or missing.
WARNING! The metallic parts of the pool may become hot
when exposed to sunlight and can cause injury!
Keep your clothes and jewellery away from rotating jets and
moving parts.
Test the residual current device before use.
Disconnect the spa from the power supply before servicing
its electrical parts. (This operation can only be performed by
qualified professionals).
It is strictly prohibited to use the spa in a not completely
assembled state (e.g. detached side panel)
Chemical treatment of water can only be performed by per-
sons under the age of 18 under parental supervision.
Maintenance can only be performed by trained professionals.
The user should check the electrical wiring every 3 months. It
is required to perform a check by a professional every 3 years.
Mains fuses / circuit breakers may be activated because of
power outages.
Installation and wiring of the spa, replacement of power cord,
and any repairs must be performed by qualified professionals.
It is required to build in an isolating device to the fixed wiring.
Plug’n’play safety warnings
Beyond the previous warnings, please also pay
attention to the undermentioned ones.
ATTENTION! The electrical receptacle must be located at least
2.5 meters from the spa so that bathers in a sitting position
cannot reach it from the water. The plug can only be connected
to a receptacle* equipped with 2.5mm 2 diameter cables
ATTENTION! RISK OF ELECTRIC SHOCK. The connector with
residual current device must be inspected before every use.
ATTENTION! Only place the RCD plug in a receptacle equipped
with RCD.
ATTENTION! Before you insert the plug into the socket ensure
that the current of the socket and the fixed wiring is appropriate
for the properties of the spa.
The spa must be equipped with an isolation transformer or
powered through a residual current device with a release
current not exceeding 30mA.
THIS PRODUCT IS EQUIPPED WITH A GROUND
FAULT CIRCUIT BREAKER (GFCI) IN THE CONNEC-
TOR. GFCI MUST BE TESTED BEFORE EACH USE.
If the power cable is damaged, it must immediately be re-
placed by the manufacturer or a service professional in order
to minimize danger.
To minimize the risk of electric shock do not use extension
leads to connect the product to the power supply.
Ensure that the receptacle is properly located.
Parts of the equipment cannot be placed above the spa
during usage.
SAFETY INSTRUCTIONS
3

Parts under electrical power – except those operating with
voltage not exceeding 12V - must be inaccessible for persons
in the spa. The grounded device must be connected to a
fixed socket with fixed wiring. Electrical parts – except
remote controllers – must be positioned so as not to fall into
the spa.
The electrical installation must meet the local standard
requirements.
To avoid electric shock do not use the spa in rain.
Water attracts children. Always place and lock the cover on
the spa after each usage.
Do not bury cables into the ground! Place the cables so that
lawnmowers, trimmers, and similar devices will not reach
them.
Do not force push the control panel up nor down and do not
place heavy objects on it after installation.
Keep pets away from the spa to avoid damage.
Do not use the device if there is the slightest chance of water
in the spa being frozen.
Only use accessories approved by us. The use of accessories
not approved by us may void the warranty.
Choking hazard. Particular attention need to be paid to
children during usage. To avoid accidents only allow children
to use this spa under adult supervision.
Never operate electrical devices in the spa or with wet body.
Do not place electrical devices (lamp, radio, television) within
a 1.5m radius of the spa.
Do not expose the spa to direct sunlight.
Only connect the spa to an earthed socket.
Risk of electric shock. Install the unit at least 1.5m (5 feet)
from any metal surfaces. You can install the unit 1.5m from
metal surfaces only if every metal surface is permanently
connected to a solid copper conductor
with a diameter of at least 6mm, which is connected to the
cable connector of a junction box reserved for that purpose.
To avoid injury never pour water warmer than 40°C directly
into the spa.
Effects of overheating: you cannot assess emergency situa-
tions, do not feel the temperature, do not feel the need to get
out of the spa, cannot get out of the spa; risk of fetal damage
in pregnant women, loss of consciousness, suffocation.
Do not use the spa alone.
Do not use the spa immediately after strenuous sport.
To prevent damage to the pump the spa can only be operat-
ed if it has been filled with water.
If you feel uncomfortably or sleepy, leave the spa immedi-
ately.
Never add water to the chemicals. Always be cautious when
adding chemicals to the spa water to avoid inhaling vapors
and possible effects of inhaling undiluted chemicals and
splatters.
Only place the spa on a surface that can support its weight.
INSPECT THE UNIT BEFORE USE. CONTACT THE SER-
VICE PROVIDER STATED IN THIS MANUAL IF ANY
OF THE PARTS WERE DAMAGED OR MISSING UPON
PURCHASE. ENSURE THAT THE PARTS OF THE UNIT
ARE THOSE WHICH YOU INTENDED TO BUY.
SAFETY INSTRUCTIONS
4

5
BASIC FUNCTIONS
Keypads: The keypads make it possible to control and set up the spa. Available basic functions: pump(s), light and temperature
control. (For more information see the details later)
Valves
Diverter: Some spa are equipped with water diverter(s) that allows you to direct the waterflow to various sections of the spa.
The valve has three basic positions By turning the lever all the way to the left position will divert the water section A of the spa.
By turning the lever all the way to the right will shut off section A and divert the water to section B and by moving the lever to
the middle between A & B will divert the water to both A & B sections
Waterfall diverter: Some spas are equipped with a waterfall diverter which will turn the waterfalls/fountians either on or off
Air regulators: You can use it by turning the lever counter-clockwise, will open the Air Regulator to allow air to mix with the
water to create more pressure from the jets. Turning the lever to the left will cose the valve not allowing air to mix with the
water for the jets. These air regulators should remain closed when the spa is not in use to save energy.
Speakers (Optional): If your spa is equipped with an audio system, you can connect via Bluetooth and help your relaxing with
your favourite music. (MyMusic pin:2288)
Filter house: Part of the recirculating system, it holds the paper filter.
Fountain: Some spas are equipped with fountians or waterfalls. If you open the waterfall diverter, the water will flow through
the fountains or waterfalls.
Jets: There are 3 sizes of jets; the 5” and 3” jets have two types: directional and rotational. The 2” jets are only directional. To
open the jet face is turned clockwise. To lessen the pressure or to close, the jet face is turned counter-clockwise
Aroma therapy: You can stimulate your senses with different aromas. You can get aroma into the water if you push the button
on the top of the tank. you can block the button if you turn it.
Suction: The pumps suck the water through this element. Never block it, and keep your body and hair away from these units.
Head rests
Keypads
Diverter,
Air regulator,
On/off valve
Speakers
Filter house
Fountain
Jet (5”-direct,
rotational;
3”-direct,
rotational;
2”-direct)
Aroma Suction

CONNECTION DIAGRAM
MALAGA LIFE
145
1
2
4
5
6
9
12
13
14
13
16
15
17
18
20
21
Electrical connection suggested side
Drain pipe
Heat exchanger outlet
3
7
8
10
11
19
22
2423
26
25
27 32
28
29 30 31
You must install a 30 mA residual-current deviice (RCD).
684
524 580
720
650
725
No.
Art. No.
IFS Name
Pcs
1
AKU2647
Led housing with seal
16
2
AKU2219
Nut for ledhouse
16
3
AKU1916
Waterfall 276x51x48
1
4
AKU1891
Water Diverter 60 - LED lighted V2
1
5
AKU1892
Air Regulator - house led lighted V2
3
6
AKU1893
On-Off tap house 33 transparent V2
2
7
AKU2625
Fountain laminar V3
3
8
AJ00291
Jet ozone with sealing V2
1
9
AKU1830
Filter house for floating 50 sqf filters
1
10
ABE0505
Suction 2" chrome thick with seal V2
3
11
AJ00282
1
12
AKU0084
Water Drain - 20 RB V2
1
13
ACM0080
Spa Pump 3 HP - One Speed
2
14
ACM0846
Circulation pump WTC50M 250 W 0.33 Hp
1
15
ABE0621
Ozon mixer - Housing
1
16
ABE0620
Mixer housing
1
17
ACM0999
Ozone - Generator P54 100 mA
1
18
ACM0755
Control box In.YE-3
1
19
ACM0959
Control Panel - IN.K500 GECKO
1
20
ACM0874
Speaker 3" (2 way)
2
21
ACM0875
Grille for speaker 3" (2 way)
2
22
AJ00214
Jet 2" - transparent 1 Hole transparent V3 Wellis
5
23
AJ00216
Jet 3" - transparent 1 Hole V3 Wellis
14
24
AJ00217
Jet 3" - transparent 1 Hole Rotation transparent V3 Wellis
8
25
AJ00218
Jet 5" - transparent 1 Hole transparent V3 Wellis
9
26
AJ00219
Jet 5" - transparent 1 Hole rotational transparent V3 Wellis
4
27
AKU1832
Filter House - Skimmer Cover round
1
28
AKU1894
Water Diverter - Grip Wellis V2
1
29
AKU1895
Air regulator grip Wellis V2
3
30
AKU1896
On-off tap grip Wellis V2
2
31
AF00061
Pillow 300x126x54 white ribbed
3
32
AKU1842
Skimmer house with Wellis logo
1
A
B B
C C
D D
E E
F F
8 8
7 7
6 6
5 5
4 4321
335 kg
FJ_WM00541_ENG_Malaga_life_medence
Malaga Life spa
Losteiner Sándor
A3
page 1 / 2
File path - - - - > C:\WELLIS_PDM\Belso_PDM_doksik\Uj_Dokumentum_rendezes\FJ_WM_100\
File name:
A
M
1:20
WM00541
Number:
Sheet name: Created:
2023. 02. 24.
Drawer:
losteiner.sandor - 2023. 02. 24. 11:49:21
Approved by:
Weight of the SPA:
Pr. No:
Wellis Magyarország Zrt.
Projection
Fe. No:
Dimension SPA:
2180x2180x900 mm
Raklap 2200x950 Rio2 - AE00362
Rim height:
145 mm
Control box
:
Gecko IN.YE-3 (3KW) + IN. K500
Product family:
Wellis\CityLife
Minimum water:
1200 liter 450 kg
Water disp.: 1 person ~75 kg
Min.El. nds:
230 V - 25A - 50Hz / Opt.El. needs: 230V - 35A - 50Hz
6

145
1
2
4
5
8
11
12
12
13
14
15
24
Electrical connection suggested side
Heat exchanger outlet
Drain pipe
3
6 79
10
1618 17
19 23 21
20 22
25 28
26 27
You must install a 30 mA residual-current device (RCD).
600 600 600
573 573
606
607
No.
Art. No.
IFS Name
Pcs
1
AKU1893
On-Off tap house 33 transparent V2
2
2
AKU1892
Air Regulator - house led lighted V2
7
3
AKU2101
Fountain laminar V2
2
4
AKU2647
Led housing with seal
16
5
AKU2219
Nut for ledhouse
16
6
AKU1916
Waterfall 276x51x48
1
7
AJ00247
Jet water ciculation self-leveling
2
8
AKU1830
Filter house for floating 50 sqf filters
1
9
AJ00169
Jet - 20 SB - Ozone 90°
1
10
ABE0505
Suction 2" chrome thick with seal V2
4
11
AKU0084
Water Drain - 20 RB V2
1
12
ACM0080
Spa Pump 3 HP - One Speed
2
13
ACM0846
Circulation pump WTC50M 250 W 0.33 Hp
1
14
ACM0888
UV-C Stainless steel house set
1
15
ACM0755
Control box In.YE-3
1
16
ACM0912
Control Panel - IN.K1000 V2
1
17
ACM0874
Speaker 3" (2 way)
2
18
ACM0875
Grille for speaker 3" (2 way)
2
19
AJ00214
Jet 2" - transparent 1 Hole transparent V3 Wellis
14
20
AJ00217
Jet 3" - transparent 1 Hole Rotation transparent V3 Wellis
10
21
AJ00216
Jet 3" - transparent 1 Hole V3 Wellis
13
22
AJ00219
Jet 5" - transparent 1 Hole rotational transparent V3 Wellis
1
23
AJ00218
Jet 5" - transparent 1 Hole transparent V3 Wellis
6
24
AF00061
Pillow 300x126x54 white ribbed
4
25
AKU1896
On-off tap grip Wellis V2
2
26
AKU1832
Filter House - Skimmer Cover round
1
27
AKU1842
Skimmer house with Wellis logo
1
28
AKU1895
Air regulator grip Wellis V2
7
A
B B
C C
D D
E E
F F
8 8
7 7
6 6
5 5
4 4321
335 kg
FJ_WM00564_ENG_Lima_life_medence
Lima Life spa
Losteiner Sándor
A3
page 1 / 2
File path - - - - > C:\WELLIS_PDM\Belso_PDM_doksik\Uj_Dokumentum_rendezes\FJ_WM_100\
File name:
A
M
1:20
WM00564
Number:
Sheet name: Created:
2023. 02. 24.
Drawer:
losteiner.sandor - 2023. 02. 24. 12:14:24
Approved by:
Weight of the SPA:
Pr. No:
Wellis Magyarország Zrt.
Projection
Fe. No:
Dimension SPA:
2180x2180x900 mm
Raklap 2200x950 RIo2 - AE00362
Rim height:
145 mm
Control box
:
Gecko IN.YE-3 (3KW) + IN. K500
Product family:
Wellis\CityLife
Minimum water:
1300 liter 525 kg
Water disp.: 1 person ~75 kg
Min.El. nds:
230 V - 25A - 50Hz / Opt.El. needs: 400V - 3x16A - 50Hz
CONNECTION DIAGRAM
LIMA LIFE
7

CONNECTION DIAGRAM
PALERMO LIFE
8
145
1
2
3
5
4
6
7
9
13
16
15
14
18
19
16
20
23
22
34
Electrical connection suggested side
Drain pipe
Heat exchanger outlet
9
11
12
21
24
2625
28 29 27 30
32
31
33
You must install a 30 mA residual-current device (RCD).
665
633
702 627
663
Tétel
Cikkszám
IFS megnevezés EN
Db
1
AKU2647
Led housing with seal
16
2
AKU2219
Nut for ledhouse
16
3
AKU1916
Waterfall 276x51x48
1
4
AKU1893
On-Off tap house 33 transparent V2
2
5
AKU1892
Air Regulator - house led lighted V2
3
6
AKU1891
Water Diverter 60 - LED lighted V2
1
7
AKU2625
2
8
ASE0005-K
16
9
AKU1830
Filter house for floating 50 sqf filters
1
10
AJ00291
Jet ozone with sealing V2
1
11
ABE0505
Suction 2" chrome thick with seal V2
4
12
AJ00294
1
13
AKU0084
Water Drain - 20 RB V2
1
14
ACM0080
Spa Pump 3 HP - One Speed
1
15
ACM0080
Spa Pump 3 HP - One Speed
1
16
ACM0846
Circulation pump WTC50M 250 W 0.33 Hp
1
17
ABE0621
Ozon mixer - Housing
1
18
ABE0620
Mixer housing
1
19
ACM0999
Ozone - Generator P54 100 mA
1
20
ACM0755
Control box In.YE-3
1
21
ACM0959
Control Panel - IN.K500 GECKO
1
22
ACM0874
Speaker 3" (2 way)
2
23
ACM0875
Grille for speaker 3" (2 way)
2
24
AKU1894
Water Diverter - Grip Wellis V2
1
25
AKU1895
Air regulator grip Wellis V2
3
26
AKU1896
On-off tap grip Wellis V2
2
27
AJ00219
Jet 5" - transparent 1 Hole rotational transparent V3 Wellis
6
28
AJ00218
Jet 5" - transparent 1 Hole transparent V3 Wellis
6
29
AJ00216
Jet 3" - transparent 1 Hole V3 Wellis
20
30
AJ00217
Jet 3" - transparent 1 Hole Rotation transparent V3 Wellis
10
31
AKU1842
Skimmer house with Wellis logo
1
32
AF00061
Pillow 300x126x54 white ribbed
3
33
AKU1832
Filter House - Skimmer Cover round
1
34
AKU1831
Spa Filter 337 x 124 white 50 sqf (no thread)
1
A
B B
C C
D D
E E
F F
8 8
7 7
6 6
5 5
4 4321
335 kg
FJ_WM00567_ENG_Palermo_life_medence
Palermo Life spa
Losteiner Sándor
A3
page 1 / 2
File path - - - - > C:\WELLIS_PDM\Belso_PDM_doksik\Uj_Dokumentum_rendezes\FJ_WM_100\
File name:
A
M
1:20
WM00567
Number:
Sheet name: Created:
2023. 02. 24.
Drawer:
losteiner.sandor - 2023. 02. 24. 11:53:49
Approved by:
Weight of the SPA:
Pr. No:
Wellis Magyarország Zrt.
Projection
Fe. No:
Dimension SPA:
2180x2180x900 mm
Raklap 2200x950 Rio2 - AE00362
Rim height:
145 mm
Control box
:
Gecko IN.YE-3 + IN. K500 (3kW)
Product family:
Wellis\CityLife
Minimum water:
1175 liter 375 kg
Water disp.: 1 person ~75 kg
Min.El. nds:
230 V - 35A - 50Hz / Opt.El. needs: 400V - 3x22A - 50Hz

CONNECTION DIAGRAM
LUGANO LIFE
9
110
1
2
3
5
6
10
12
13
14
15
16
24
27
31
29
30
28
Electrical connection suggested side
Drain pipe Heat exchanger outlet
4 7
8
9
11
18
17
19
20
21 23
22
25
26
32
You must install a 30 mA residual-current device (RCD).
685
588
716
697
714
693
No.
Art. No.
IFS Name
Pcs
1
AKU2647
Led housing with seal
13
2
AKU2219
Nut for ledhouse
13
3
AKU1893
On-Off tap house 33 transparent V2
1
4
AKU2437
Cup Holder Light - lens wellis 2020
2
5
AKU1892
Air Regulator - house led lighted V2
4
6
AKU1891
Water Diverter 60 - LED lighted V2
1
7
AKU0056
Cup Holder Light lens light bule/transparent
2
8
ABE0505
Suction 2" chrome thick with seal V2
4
9
AJ00291
Jet ozone with sealing V2
1
10
AKU1840
Filter holder - 48 mm
3
11
AJ00282
1
12
AKU0084
Water Drain - 20 RB V2
1
13
ACM0755
Control box In.YE-3
1
14
ACM0846
Circulation pump WTC50M 250 W 0.33 Hp
1
15
ACM0080
Spa Pump 3 HP - One Speed
1
16
ACM0080
Spa Pump 3 HP - One Speed
1
17
AJ00214
Jet 2" - transparent 1 Hole transparent V3 Wellis
23
18
AJ00216
Jet 3" - transparent 1 Hole V3 Wellis
23
19
AJ00218
Jet 5" - transparent 1 Hole transparent V3 Wellis
6
20
AF00065
Pillow 42x17 grey (ROB) light grey
3
21
AKU1894
Water Diverter - Grip Wellis V2
1
22
AKU1896
On-off tap grip Wellis V2
1
23
AKU1895
Air regulator grip Wellis V2
4
24
AKU1609
Spa Filter - 175 × 152 - Myline white (coarse thread)
3
25
AKU1833
Filter House - Skimmer Cover grey with Wellis logo
1
26
AKU1835
Skimmer house light grey
1
27
ACM0875
Grille for speaker 3" (2 way)
2
28
ABE0621
Ozon mixer - Housing
1
29
ABE0620
Mixer housing
1
30
ACM0999
Ozone - Generator P54 100 mA
1
31
ACM0874
Speaker 3" (2 way)
2
32
ACM0959
Control Panel - IN.K500 GECKO
1
A
B B
C C
D D
E E
F F
8 8
7 7
6 6
5 5
4 4321
387 kg
FJ_WM00723_ENG_Lugano_life_medence
Lugano Life spa
Losteiner Sándor
A3
page 1 / 2
File path - - - - > C:\WELLIS_PDM\Belso_PDM_doksik\Uj_Dokumentum_rendezes\FJ_WM_100\
File name:
A
M
1:20
WM00723
Number:
Sheet name: Created:
2023. 02. 24.
Drawer:
losteiner.sandor - 2023. 02. 24. 12:00:33
Approved by:
Weight of the SPA:
Pr. No:
Wellis Magyarország Zrt.
Projection
Fe. No:
Dimension SPA:
2300x2300x940 mm
Raklap 235x98 - AE00423
Rim height:
110 mm
Control box
:
GECKO IN.YE3 (3KW) + IN. K500
Product family:
Wellis\CityLife
Minimum water:
1500 liter 450 kg
Water disp.: 1 person ~75 kg
Min.El. nds:
230 V - 25A - 50Hz / Opt.El. needs: 400V - 3x16A - 50Hz

CONNECTION DIAGRAM
MANHATTAN LIFE
10
140
1
2
3
67
8
9
11
12
13
14
16
17
15
19
18
Electrical connection suggested side
Drain pipe
Heat exchanger outlet
4
5 10
20
22
23
24
21
25 26
27
28 29
30
695 695
You must install a 30 mA residual-current device (RCD).
655
No.
Art. No.
IFS Name
Pcs
1
AKU1892
Air Regulator - house led lighted V2
3
2
AKU1893
On-Off tap house 33 transparent V2
1
3
AKU1891
Water Diverter 60 - LED lighted V2
1
4
AKU2625
Fountain laminar V3
2
5
ABE0505
Suction 2" chrome thick with seal V2
2
6
AKU2647
Led housing with seal
10
7
AKU2219
Nut for ledhouse
10
8
AKU1830
Filter house for floating 50 sqf filters
1
9
AJ00291
Jet ozone with sealing V2
1
10
AJ00282
1
11
AKU0084
Water Drain - 20 RB V2
1
12
ACM0080
Spa Pump 3 HP - One Speed
1
13
ACM0846
Circulation pump WTC50M 250 W 0.33 Hp
1
14
ACM0755
Control box In.YE-3
1
15
ABE0621
Ozon mixer - Housing
1
16
ABE0620
Mixer housing
1
17
ACM0999
Ozone - Generator P54 100 mA
1
18
ACM0874
Speaker 3" (2 way)
2
19
ACM0875
Grille for speaker 3" (2 way)
2
20
ACM0959
Control Panel - IN.K500 GECKO
1
21
AJ00214
Jet 2" - transparent 1 Hole transparent V3 Wellis
2
22
AJ00216
Jet 3" - transparent 1 Hole V3 Wellis
20
23
AJ00217
Jet 3" - transparent 1 Hole Rotation transparent V3 Wellis
6
24
AJ00218
Jet 5" - transparent 1 Hole transparent V3 Wellis
2
25
AKU1832
Filter House - Skimmer Cover round
1
26
AKU1842
Skimmer house with Wellis logo
1
27
AF00061
Pillow 300x126x54 white ribbed
3
28
AKU1895
Air regulator grip Wellis V2
3
29
AKU1896
On-off tap grip Wellis V2
1
30
AKU1492
Water Diverter - Grip Wellis
1
A
B B
C C
D D
E E
F F
8 8
7 7
6 6
5 5
4 4321
280 kg
FJ_WM00773_ENG_Manhattan_life_medence
Manhattan Life spa
Losteiner Sándor
A3
page 1 / 2
File path - - - - > C:\WELLIS_PDM\Belso_PDM_doksik\Uj_Dokumentum_rendezes\FJ_WM_100\
File name:
A
M
1:20
WM00773
Number:
Sheet name: Created:
2023. 02. 24.
Drawer:
losteiner.sandor - 2023. 02. 24. 12:18:46
Approved by:
Weight of the SPA:
Pr. No:
Wellis Magyarország Zrt.
Projection
Fe. No:
Dimension SPA:
2010x1530x850 mm
Raklap 155x85 - AE00090
Rim height:
140 mm
Control box
:
Gecko IN.YE-3(3kW) + IN. K500
Product family:
Wellis\CityLife
Minimum water:
560 liter 225 kg
Water disp.: 1 person ~75 kg
Min.El. nds:
230 V - 16A - 50Hz / Opt.El. needs: 230V - 32A - 50Hz

CONNECTION DIAGRAM
VIENNA LIFE
11
2
6
1
3
4
7
8
9
12
14
13
14
16
17
15
18
20
19
24
713
Electrical connection suggested side
Drain pipe
Heat exchanger outlet
5
10
11
21
23 22
25 27 26
28
30
29
713 713713 706
706
You must install a 30 mA residual-current device (RCD).
588
No.
Art. No.
IFS Name
Pcs
1
AKU1892
Air Regulator - house led lighted V2
5
2
AKU0056
Cup Holder Light lens light bule/transparent
6
3
AKU2647
Led housing with seal
16
4
AKU2219
Nut for ledhouse
16
5
AKU2471
Waterfall LED lighted stainless steel
1
6
AKU1893
On-Off tap house 33 transparent V2
1
7
AJ00291
Jet ozone with sealing V2
1
8
AKU1891
Water Diverter 60 - LED lighted V2
2
9
AKU1840
Filter holder - 48 mm
3
10
ABE0505
Suction 2" chrome thick with seal V2
3
11
AJ00282
1
12
AKU0084
Water Drain - 20 RB V2
1
13
ACM0846
Circulation pump WTC50M 250 W 0.33 Hp
1
14
ACM0080
Spa Pump 3 HP - One Speed
2
15
ABE0621
Ozon mixer - Housing
1
16
ABE0620
Mixer housing
1
17
ACM0999
Ozone - Generator P54 100 mA
1
18
ACM1051
Control box In.YE-3
1
19
ACM0874
Speaker 3" (2 way)
2
20
ACM0875
Grille for speaker 3" (2 way)
2
21
ACM0959
Control Panel - IN.K500 GECKO
1
22
AJ00216
Jet 3" - transparent 1 Hole V3 Wellis
22
23
AJ00214
Jet 2" - transparent 1 Hole transparent V3 Wellis
40
24
AKU0136
Spa Filter - 175 × 152 - Wellis Antimicrobial blue (fine Thread)
3
25
AKU1895
Air regulator grip Wellis V2
5
26
AKU1894
Water Diverter - Grip Wellis V2
2
27
AKU1896
On-off tap grip Wellis V2
1
28
AKU1833
Filter House - Skimmer Cover grey with Wellis logo
1
29
AF00065
Pillow 42x17 grey (ROB) light grey
4
30
AKU1835
Skimmer house light grey
1
A
B B
C C
D D
E E
F F
8 8
7 7
6 6
5 5
4 4321
226 kg
FJ_WM00796_ENG_Vienna_life_medence
Vienna Life medence
Losteiner Sándor
A3
page 1 / 2
File path - - - - > C:\WELLIS_PDM\Belso_PDM_doksik\Uj_Dokumentum_rendezes\FJ_WM_100\
File name:
A
M
1:20
WM00796
Number:
Sheet name: Created:
2023. 02. 24.
Drawer:
losteiner.sandor - 2023. 02. 24. 11:55:25
Approved by:
Weight of the SPA:
Pr. No:
Wellis Magyarország Zrt.
Projection
Fe. No:
Dimension SPA:
2300x2300x960 mm
Raklap 235x98 - AE00423
Rim height:
140 mm
Control box
:
GECKO YE3 + INK500 -3KW (2M)
Product family:
Wellis\CityLife
Minimum water:
1300 liter 525 kg
Water disp.: 1 person ~75 kg
Min.El. nds:
230 V - 22A - 50Hz / Opt.El. needs: 230V - 35A - 50Hz

CONNECTION DIAGRAM
BUDAPEST LIFE
12
110
3
4
1
2
8
10
9
13
12
12
14
18
15
22
Electrical connection suggested side
Drain pipe
Heat exchanger outlet
5
25
6
7
16 17
19
20 21
23 24
635
795
640
You must install a 30 mA residual-current device (RCD).
625
690
No.
Art. No.
IFS Name
Pcs
1
AKU2647
Led housing with seal
16
2
AKU2219
Nut for ledhouse
16
3
AKU1892
Air Regulator - house led lighted V2
3
4
AKU1891
Water Diverter 60 - LED lighted V2
1
5
ACM0959
Control Panel - IN.K500 GECKO
1
6
ABE0505
Suction 2" chrome thick with seal V2
3
7
AJ00282
1
8
AKU0084
Water Drain - 20 RB V2
1
9
ACM0394
Spa Pump 3/0.6 HP - Two Speed
1
10
ACM0846
Circulation pump WTC50M 250 W 0.33 Hp
1
11
ABE0621
Ozon mixer - Housing
1
12
ABE0620
Mixer housing
1
13
ACM0999
Ozone - Generator P54 100 mA
1
14
ACM1051
Control box In.YE-3
1
15
ACM0874
Speaker 3" (2 way)
2
16
AJ00214
Jet 2" - transparent 1 Hole transparent V3 Wellis
20
17
AJ00216
Jet 3" - transparent 1 Hole V3 Wellis
22
18
ACM0875
Grille for speaker 3" (2 way)
2
19
AKU1894
Water Diverter - Grip Wellis V2
1
20
AKU1895
Air regulator grip Wellis V2
3
21
AF00061
Pillow 300x126x54 white ribbed
3
22
AKU1830
Filter house for floating 50 sqf filters
1
23
AKU1832
Filter House - Skimmer Cover round
1
24
AKU1842
Skimmer house with Wellis logo
1
25
AJ00291
Jet ozone with sealing V2
1
A
B B
C C
D D
E E
F F
8 8
7 7
6 6
5 5
4 4321
236 kg
FJ_WM00799_ENG_Budapest_life_medence
Budapest Life spa
Losteiner Sándor
A3
page 1 / 2
File path - - - - > C:\WELLIS_PDM\Belso_PDM_doksik\Uj_Dokumentum_rendezes\FJ_WM_100\
File name:
A
M
1:20
WM00779
Number:
Sheet name: Created:
2023. 02. 24.
Drawer:
losteiner.sandor - 2023. 02. 24. 14:05:47
Approved by:
Weight of the SPA:
Pr. No:
Wellis Magyarország Zrt.
Projection
Fe. No:
Dimension SPA:
2000x2000x890 mm
Rim height:
110 mm
Control box
:
GECKO IN.YE-3 (3KW) +K500 - (2M)
Product family:
Wellis\CityLife
Minimum water:
1100 liter 375 kg
Water disp.: 1 person ~75 kg
Min.El. nds:
230 V - 22A - 50Hz / Opt.El. needs: 230V - 35A - 50Hz

CONNECTION DIAGRAM
PRAGUE LIFE
13
115
1
4
7
8
10
12
11
14
15
15
17
22
27
28
29
Electrical connection suggested side
Heat exchanger outlet
Drain pipe
2
5
8
9
16
19
18
20 21
23 24 25 26
You must install a 30 mA residual-current device (RCD).
625
610
675
615
680
580
No.
Art. No.
IFS Name
Pcs
1
AKU1893
On-Off tap house 33 transparent V2
2
2
AKU2437
Cup Holder Light - lens wellis 2020
2
3
AKU2438
Cup Holder Light nut
2
4
AKU1830
Filter house for floating 50 sqf filters
1
5
ABE0505
Suction 2" chrome thick with seal V2
3
6
AJ00291
Jet ozone with sealing V2
1
7
AKU1891
Water Diverter 60 - LED lighted V2
1
8
AKU1892
Air Regulator - house led lighted V2
4
9
AJ00282
1
10
AKU0084
Water Drain - 20 RB V2
1
11
ACM0394
Spa Pump 3/0.6 HP - Two Speed
1
12
ACM0846
Circulation pump WTC50M 250 W 0.33 Hp
1
13
ABE0621
Ozon mixer - Housing
1
14
ABE0620
Mixer housing
1
15
ACM0999
Ozone - Generator P54 100 mA
1
16
ACM0959
Control Panel - IN.K500 GECKO
1
17
ACM0874
Speaker 3" (2 way)
2
18
AJ00214
Jet 2" - transparent 1 Hole transparent V3 Wellis
36
19
AJ00217
Jet 3" - transparent 1 Hole Rotation transparent V3 Wellis
14
20
AKU1832
Filter House - Skimmer Cover round
1
21
AKU1842
Skimmer house with Wellis logo
1
22
ACM0875
Grille for speaker 3" (2 way)
2
23
AKU1896
On-off tap grip Wellis V2
2
24
AKU1895
Air regulator grip Wellis V2
4
25
AKU1894
Water Diverter - Grip Wellis V2
1
26
AF00061
Pillow 300x126x54 white ribbed
3
27
ACM1051
Control box In.YE-3
1
28
AKU2647
Led housing with seal
15
29
AKU2219
Nut for ledhouse
15
A
B B
C C
D D
E E
F F
8 8
7 7
6 6
5 5
4 4321
226 kg
FJ_WM00800_ENG_Prague_life_medence
Prague Life spa
Losteiner Sándor
A3
page 1 / 2
File path - - - - > C:\WELLIS_PDM\Belso_PDM_doksik\Uj_Dokumentum_rendezes\FJ_WM_100\
File name:
A
M
1:20
WM00800
Number:
Sheet name: Created:
2023. 02. 24.
Drawer:
losteiner.sandor - 2023. 02. 24. 14:06:12
Approved by:
Weight of the SPA:
Pr. No:
Wellis Magyarország Zrt.
Projection
Fe. No:
Dimension SPA:
2000x2000x900 mm
Raklap - AE00091
Rim height:
115 mm
Control box
:
GECKO IN.YE-3 + K500 - 3KW
Product family:
Wellis\CityLife
Minimum water:
1200 liter 450 kg
Water disp.: 1 person ~75 kg
Min.El. nds:
230 V - 16A - 50Hz / Opt.El. needs: 230V - 25A - 50Hz

CONNECTION DIAGRAM
FIRENZE LIFE
125
12
3
4
7
9
10
11
14 1315
16
18
19
Electrical conncetion suggested side
Drain pipe
Heat exchanger outlet
5
6
8
12
17
20 21 22
23
24
25
You must install a 30 mA residual-current device (RCD).
543
640 640
No.
Art. No.
IFS Name
Pcs
1
AKU1892
Air Regulator - house led lighted V2
3
2
AKU2647
Led housing with seal
12
3
AKU2219
Nut for ledhouse
12
4
AKU1891
Water Diverter 60 - LED lighted V2
1
5
AM01077
Filter House - wall one filter
1
6
ABE0505
Suction 2" chrome thick with seal V2
2
7
AJ00291
Jet ozone with sealing V2
1
8
AJ00282
1
9
AKU0084
Water Drain - 20 RB V2
1
10
ACM0594
Spa Pump 2/0.47 HP - Two Speed
1
11
ACM0846
Circulation pump WTC50M 250 W 0.33 Hp
1
12
ACM0997
Heater - 3000 W
1
13
ABE0621
Ozon mixer - Housing
1
14
ABE0620
Mixer housing
1
15
ACM0999
Ozone - Generator P54 100 mA
1
16
ACM0754
Control BOX - IN.YJ-2
1
17
ACM0759
Control Panel IN.K300 - One Pump
1
18
ACM0874
Speaker 3" (2 way)
2
19
ACM0875
Grille for speaker 3" (2 way)
2
20
AJ00217
Jet 3" - transparent 1 Hole Rotation transparent V3 Wellis
6
21
AJ00216
Jet 3" - transparent 1 Hole V3 Wellis
11
22
AJ00214
Jet 2" - transparent 1 Hole transparent V3 Wellis
20
23
AKU1894
Water Diverter - Grip Wellis V2
1
24
AKU1895
Air regulator grip Wellis V2
3
25
AF00062
Pillow 280x145x85 light grey
2
A
B B
C C
D D
E E
F F
8 8
7 7
6 6
5 5
4 4321
175 kg
FJ_WM00552_ENG_Firenze_life_medence
Firenze Life spa
Losteiner Sándor
A3
page 1 / 2
File path - - - - > C:\WELLIS_PDM\Belso_PDM_doksik\Uj_Dokumentum_rendezes\FJ_WM_100\
File name:
A
M
1:20
WM00552
Number:
Sheet name: Created:
2023. 02. 24.
Drawer:
losteiner.sandor - 2023. 02. 24. 12:08:44
Approved by:
Weight of the SPA:
Pr. No:
Wellis Magyarország Zrt.
Projection
Fe. No:
Dimension SPA:
1600x2130x750 mm
Raklap 1650x90 - AE00899
Rim height:
125 mm
Control box
:
GECKO IN.YE-2(3KW) +K300
Product family:
Wellis\CityLife
Minimum water:
685 liter 225 kg
Water disp.: 1 person ~75 kg
Min.El. nds:
230 V - 16A - 50Hz / Opt.El. needs: 230V - 25A - 50Hz
14

Item
number Spa name Requirements Heater
(w)
Water
quantity
(litre)
Dry
weight
(kg)
Filled
weight
(kg)
Dead
weight
(kg/m2)
Dimensions High Filter
(sqf)
WM00541 Malaga
Life
min: 230V/1x35A/50Hz
opt: 400V/3x22/50Hz 3000 120 0 335 1535 323 2180 mm 2180 mm 900 mm 1x50
WM00564 Lima
Life
min: 230V/1x25A/50Hz
opt: 400V/3x16A/50Hz 3000 1300 335 1635 345 2180 mm 2180 mm 900 mm 1x50
WM00567 Palermo
Life
min: 230V/1x35A/50Hz
op.t: 400V/3x22/50Hz 3000 1175 335 1510 318 2180 mm 2180 mm 900 mm 1x50
WM00723 Lugano
Life
min: 230V/1x35A/50Hz
opt: 400V/3x22/50Hz 3000 1600 387 1987 376 2300 mm 2300 mm 940 mm 3x30
WM00773 Manhattan
Life
1X32A/230V/50HZ min:
1x16 A/230V/50HZ 3000 280 560 840 274 2010 mm 1530 mm 850 mm 1x50
WM00796 Vienna
Life 22A /35A - 230V/50HZ 3000 1300 226 1526 289 2300 mm 2300 mm 960 mm 1x50
WM00799 Budapest
Life
min: 230V/1x22A/50Hz
opt.: 230V/1x35A/50Hz 3000 110 0 236 1336 334 2000 mm 2000 mm 890 mm 1x50
WM00800 Prague
Life
min: 230V/1X16A/50Hz
opt: 230V/1x25/50Hz 3000 120 0 226 1426 357 2000 mm 2000 mm 900 mm 1x50
INITIAL INSTALLATION
Electrical preparations:
A clearly labeled emergency switch shall be provided as part of the installation. The switch shall be readily accessible to the
occupants and shall be installed at least 5 feet (1.52 m) away, adjacent to, and within sight of, the unit.
Before installation the hot tub, the ellectrical system has to be prepared, as detailed in the below table.
15

16
INITIAL INSTALLATION
SITE PREPARATION
When choosing a site for the hot tub take into account that
its maintenance and repair works must be carried out behind
the sidewalls, so accessibility and hot tubce to walk around
the hot tub must be ensured.
1. INDOOR/BASEMENT INSTALLATION
If you place your hot tub indoors, be aware of some special
requirements:
Water may accumulate around the hot tub, so the flooring
material must have a proper runoff to avoid accumulation of
water. When building a new room for the hot tub, construct-
ing a floor drain is required, or damages may occur due to
overflow, overfilling, or technical failure. Our company does
not take responsibility for any damage in absence of floor
drainage.Humidity will naturally increase in the room where
the hot tub is located and the evaporated water condenses.
For this reason ensure that the area has proper ventilation.
We recommend installing a dehumidifier in the room.
2. OUTROOR AND PATIO INSTALL ATI ON
A solid horizontal foundation is necessary for installation of
the hot tub. We advise using a reinforced concrete founda-
tion at least 10-15cm thick.
Do not shim the spa, it may casuse not repairable damages.
The base to be even and horizontal.
Ensure that your deck or foundation will support your hot
tub. You must know the maximal load capacity of the foun-
dation. Consult a qualified building contractor or structural
engineer.
To find out the weight of your hot tub, its contents and
occupants please refer to the hot tub specification chart. This
weight must not exceed the structure’s rated capacity per
square meter, otherwise serious structural damages could
result. If you install the hot tub outdoors, we recommend a
reinforced horizontal concrete pad at least 10-15cm thick.
Install floor drains around your hot tub to lead water away
even in heavy rain.
When constructing the water drain it is advised to form a
10-15cm deep sloping ditch around the hot tub which directs
water to the drain. Water from the drain must be directed to
the canal or a drainage with enough capacity.
Warning: Do not expose the hot tub to direct sunlight (not
even empty) without proper coverage. The insulated hot tub
cover preserves the water temperature and provides protection
from sunlight and rain. When exposed to sunshine for a longer
period it may damage the surface of the hot tub and the hot tub
equipment.
Acrylic rapidly absorbs heat from sun rays, thus reaches a very
high surface temperature which may damage the hot tub.
In case of sealed design, if the hot tub was placed between
glass structures, prevent the sun rays from reaching the hot
tub directly through the glass as the temperature may get
too high.
3. IN-GROUND / SUNKEN HOT TUB
In case of sinking the hot tub into the ground you must
make sufficient space for walking around the hot tub. For
completion of maintenance works a minimum of 60cm wide
inspection pit must be built around the hot tub.
The inspection pit’s bottom must be under the bearing pont
of the hot tub so that water can flow into the pit in case of
water leakage. A floor drain or sump pump should be used at
the bottom of the pit to ensure continual water drainage.
In case of sinking the hot tub only the portion below the hot
tub’s acrylic edge can be sunk. The air of the inspection pit
steams up. To prevent unpleasant odors proper ventilation
must be provided (e.g. installing ventilators). The costs of
pulling the hot tub out of the ground are borne by the user.
If the aforementioned conditions are not present, setting up
the hot tub may fail.
First filling of the hot tub
Proper filling of the hot tub is an important task both tech-
nically and chemically. We advise installation and periodic
maintenance by the servicing professionals, which includes
inspection and refilling of hot tub water. Hot tubs do not con-
tain water softener and hard water damages the equipment.
Improper filling of the hot tub may bring air into the system,
which damages the heating wire and engines. Repairs after
such failures are not covered by warranty.

17
INITIAL INSTALLATION
Filling process
Remove the hot tub cover. First remove the cover staves,
then remove the side covers by unscrewing the bottom
screws. During transportation the flare fittings of engines
may dislocate. Check these connections before installation. If
necessary, tighten the flare fittings.
Before filling the hot tub check that the Slice valves are not
in a closed state (lever is pulled out and fixed with the safety
lock).
Next fill the hot tub with water to the sign indicated on its
sidewall.
Filling must be done through the filter housing. Improper
filling can damage the engines and heating element.
Insert the filter or filter cartridges when proper water level
is reached. Be cautious, because when replacing the filter
cartridge air bubbles may remain in the cartridge. To avoid
this the filter cartridges must be tilted in the water to remove
air from them, and only then fitted to their place.

18
IONIC EXCHANGE WATER SOFTENER AND
CARBON FILTER
For the optimal quality the following steps shall be followed
during the usage:
1.
Please check the required water volume in the manual of
the spa or contact our customer service for help. The exact
volume is needed for the precise filling.
2.
Please remove the covering caps from both ends to connect
the filling hose.
3.
Please connect the carbon filter to the water hose via the
screw thread gadget (included with the filter).
4.
Please run water through the filter into a separate vessel until
it becomes perfectly clear. This step allows the filter to rinse
from the remaining carbon powder. The rinse cycle lasts for
30 seconds at most with approx 10 litres of water.
0’-30’ >30’
5.
Through the clean filter fill up the spa with one third (1/3)
of the total volume (e.g.: with 1000 litres of total volume 1/3
is 300 litres). It is important to follow the instructions of the
filling for it is crutial to set the precise water hardness.
Insert the filter or filter cartridges when proper water level
is reached. Be cautious, because when replacing the filter
cartridge air bubbles may remain in the cartridge. To avoid
this the filter cartridges must be tilted in the water to remove
air from them, and only then fitted to their place.
6.
After the filling please remove the caps from the water soft-
ener cartridge too and connect it with the carbon filter. With
water softener the rinsing is significantly faster, so only this
first 1 liter needs to be drained separately!
7.
Please check the water hardness during the filling with the
softener. There are multiple choice of using a hardness tester.
Testers sold by Wellis are showing the hardness level on a
colour scale.
If the value shown is less than the optimal value the water will
create foam during the usage, if the value is more that will
cause limescaling.
8.
If the water hardness is extremely low during the filling
please remove the softener cartridge and continue the filling
with only the carbon filter as it shown at point 5.
INITIAL INSTALLATION