WELLTECH CAS2000 - CONNECT TO SIPPBX6200 User manual

How to connect CAS2000 to
Welltech SIPPBX6200.
Step 1:
Make sure your 6200 CDR settings as below
*If you changed any settings, please do ControlÎSystemÎSoft Reset

Step 2:
Install CAS 2000 first.( Do it by CAS 2000 user guide)
Click PBX Setup as bellow
Then change settings as bellow please.
*Make sure you selected the “TCP WELLTECH SIPPBX 6200”
After Save and Close it.
Please Close all of CAS 2000 applications then restart it.

Step 3:
You will see bellow application after restart CAS 2000
Click SetupÎOption as bellow.
Then change settings as bellow.
* PBX Addr1 : your 6200’s IP address
Save then close the setup.
Click Connect button then you will see login information at this application.