WePresent WiCS-2100 User manual

WiCS-2100
Quick Start Guide
Version: 2.02

1.Package Contents
• wePresent WiCS-2100 (Base Unit)
• Power Adapter (DC +12V, 2A)
[Manufacturer: Asian Power Devices Inc./Model: WA-24Q12R]
• Wall-Mount Kit
• Quick Start Guide
• Warranty Card
• CE DoC and Warning Statement

2. Physical Details
• Front
• Rear
Stand-by Button
and LED Indicator
Standby button: press the button to enter
the standby mode
LED indicator: red - system loading
blue - system ready
USB Port (Front)
USB host 2.0 port for USB
mouse/keyboard/thumb drive/touch device
USB Port (Rear)
USB host 2.0 port for USB thumb drive/
mouse/keyboard/touch device
Ethernet Port
10/100/1000M RJ-45 port
For PoE (Power over Ethernet)
HDMI Port
Standard-A, HDMI 1.4b output
Audio Jack
3.5mm audio jack, stereo analog output
Power Jack
DC 12V in
Reset Button
Long press the reset button for 8~10
seconds until the device reboots
* The USB port can only supply up to 5V/0.5A to the USB thumb drive/mouse/keyboard/touch device
* Operation temperature: "0-40°C"
* PoE rating: 42.5-57V 0.35-0.26A
The power supply shall comply with the LPS (Limited Power Source) requirements.
Stand-by Button and LED Indicator
USB Port
Reset Button
USB
Port
HDMI
Port
Audio
Jack
Power
Jack
Ethernet
Port

3. What You (Might) Need
• Projector/display with HDMI interface (Required)
• Ethernet cable (Required if you want to disable the WiFi
of the WiCS-2100)
• Windows or Mac computer
• Apple iPhone, iPad or iPod touch
• Android phone or tablet
• Speaker
• USB mouse/keyboard
• USB HID touch screen/IWB device
4. Hardware Installation
1) Connect the WiCS-2100 to the projector/display through the HDMI port and turn on the
projector/display power.
2) Connect the power adapter to the WiCS-2100 to turn on the device. The system is ready when the LED
indicator turns blue.
• The default standby screen as shown below will be displayed when the system is ready.
3) If you disable the WiFi of the WiCS-2100, you need to connect the device to an existing IT network
through an Ethernet cable.
4) Insert the speaker cable to the WiCS-2100 audio jack for enhanced audio output.
5) Insert the USB mouse/keyboard/touch device to the WiCS-2100 front/rear USB port for OSD
(On-Screen Display) control or remote control.

SSID
Hostname
IP Address

5. Download the MirrorOp (Sender) App
• Windows Phone/Windows RT not supported by MirrorOp
1) Make sure your PC/Mac is WiFi-enabled, and connect
your PC/Mac to the WiCS-2100 through WiFi. You can
find the WiFi network name (SSID) of your WiCS-2100
device on the standby screen of the projector/display.
[Default SSID is WiCS-2100-xxx (xxx are the last three
characters of the MAC ID shown on the bottom of the
WiCS-2100)]
2) Open the browser of your computer, and enter the IP
address or the device hostname in the address bar of
the browser. You can find the IP address and hostname
on the standby screen of the projector/display.
[Default IP address is 92.168.100.10; default
hostname is WiCS-2100-xxx (xxx are the last three
characters of the MAC ID shown on the bottom of the
WiCS-2100)]
Windows
Mac

3) You can see the “Home” page as shown
on the left. Click to
download the portable version of the
MirrorOp (Sender) app for Windows
(Windows 7/8/10) or Mac (macOS 10.9
and above). [If you want to know the
difference between the portable version
and the installed version of the MirrorOp
app, please refer to the User’s Manual.]

6. Start the MirrorOp (Sender) App
Windows
Mac
• Make sure that the MirrorOp app is not blocked by your firewall.
1) When the MirrorOp app download is complete, double click the
file to run it. The MirrorOp app will automatically locate the
WiCS-2100. (If not, you can click or input the hostname/IP
in the text box to connect to the device.)
2) You will see the user interface of MirrorOp as shown above.
Click and start sharing your screen.
Note:
• See the User’s Manual for more
information. You can download the
User’s Manual (PDF file) from
www.mirrorop.com/WiCS-2100/.
• The MirrorOp (Presenter) app for iOS
and Android devices can be
downloaded from the Apple App Store
or Google Play Store.

Manufacturer: Barco NV
ADD: President Kennedypark 35, 8500 Kortrijk, BELGIUM
TEL: [phone]
Importer: Barco NV
ADD: President Kennedypark 35, 8500 Kortrijk, BELGIUM
TEL: [phone]