WERTHEIM Pro Multi Steamer User manual

User Manual
Pro Multi Steamer

1. Steam Trigger
2. Handle
3. Hose
4. Extension Tubes x 2
5. Variable Steam Dial
6. On/Off Button
7. Status Light Indicator
8. Water Tank Cap
9. Removable Water Tank
10. Scrubbing Head
11. Steam Mop Head
12. Carpet Glider
13. Accessory Bag
14. Boiler Drainage Cap
15. MicrobreMopPad
16. Window Squeegee
17. Oven Steam Nozzle
18. Accessory Adaptor
Features
1
2
3
13
14
12
9
8
7
6
4
5
10
11

Pro Multi Steamer
12
Accessories
16 17 18
13 15
SPECIALISED CLEANING BRUSHES AND JET NOZZLE
Forcleaningavarietyofsurfacessuchas:taps,sinks,windows,mirrors,oors,
bench tops, toilets, door handles and more.

4
INTRODUCTION
Congratulations on the purchase of your new Wertheim Pro Multi Steamer.
There are many useful features built into your cleaner. We recommend
that you carefully read this instruction manual for the best results.
Specications
Power: 2400W
Water Tank Capacity: 2.0L
Boiler Capacity: 2.1L
Cord Length: 5M
Steam Pressure: 4 Bar
Weight: 6.5KG (machine and hose)

5
Pro Multi Steamer
1. This appliance is not intended
for use by persons (including
children) with reduced
physical, sensory or mental
capabilities or lack of
experience and knowledge.
2. Always check the power cord
before use. The power cord
and the power plug should be
in a good condition and must
not be damaged. If the power
cord is damaged or defective,
it must be replaced by the
manufacturer, its service agent
orsimilarlyqualiedpersonsin
order to avoid a hazard.
3. Do not leave the appliance
unattended when plugged
into the power supply. Unplug
the power plug from the
power supply when not in
use and before conducting
maintenance, cleaning or
troubleshooting.
4. To prevent electric shock,
do not use the appliance
outdoors. The steam cleaner
is intended for household use
only.
5. Children must be supervised
to ensure that they do not play
with the appliance.
6. Do not operate the mop head
in a stationary position for an
extended period of time. Keep
the mop head moving while in
operation.
WARNING! To reduce the risk of re, electric shock or injury when using
an electrical appliance, basic precautions should always be followed,
including the following:
WARNING! Do not attempt to open the drainage cap when the unit is in
use. The boiler is pressurised.
IMPORTANT! The heat generated and the steam pressure may have
adverse consequences for certain materials. Always check before putting
the appliance into operation as to whether the surface or material is
actually suitable for treatment with steam. Do this by executing a test on a
hidden surface of the material you wish to treat.
SAFETY PRECAUTIONS & WARNINGS

6
7. Do not pull or carry the mop
head by the power cord, do
not use the power cord as a
handle, do not close a door
on the power cord or pull the
power cord around sharp
edges or corners.
8. Keep the power cord away
from heated surfaces.
9. Do not run the steam cleaner
over the power cord.
10. Do not unplug by pulling on
the power cord. To unplug,
grasp the power plug not the
power cord and gently pull the
power plug from the power
socket.
11. Do not use an extension cord.
12. Do not handle the power plug
or appliance with wet hands.
13. Do not use steam cleaner if it
has been dropped, damaged,
left outdoors or immersed into
water. Return it to the nearest
service centre.
14. Ensurethatthecleanerisxed
in the upright position before
unplugging the power plug
from the power supply.
15. Do notoverllthewatertank.
16. Do not use the cleaner without
the water tank cap in place.
Check that the water tank
cap is completely closed
before use.
17. Do not operate the cleaner
without water in the water
tank.
18. Do notllthewatertankwith
anything other than water.
Never put additives (such
as perfume disinfectant,
eucalyptus oil, stain remover or
products containing alcohol)
in the water tank as damage
to the cleaner may result or
make the cleaner dangerous
to use.
19. Do not touch any hot areas on
the steam cleaner. It is normal
for the steam cleaner to heat
up during operation.
20. The force and heat of the
steam may have an adverse
effect on some materials.
Always test the cleaner on
a small concealed area to
determine if it is suitable for
treatment.
21. Accessories become hot
during use. Allow them to cool
down before handling them.
22. Use only the manufacturer’s
recommended attachments.

7
Pro Multi Steamer
Use of attachments that are
not provided or sold by the
manufacturermaycausere,
electric shock or injury.
23. Never point or aim the steam
cleaner at people, animals or
plants.
24. Do not aim the steam cleaner
at electrical systems or wires.
25. Connecting the steam cleaner
to improper voltage may
result in damage to the steam
cleaner and possible injury.
26. Do not use steam cleaner
if there are visible signs of
damage or if it is leaking.
2 7. Do not use the cleaner on
leather, wax polished furniture
oroors,syntheticfabrics,
velvet or other delicate, steam
sensitive materials.
28. Never put aromatic, alcoholic
or detergent products into
the water tank, as this may
damage the cleaner or make
it unsafe for use.
29. The force and heat of the
steam may damage certain
materials. Some fabrics may
react to the temperature of
the steam.
30. Do not aim the steam in
the same position for long
periods of time, this can cause
damage to materials.
31. Neveroverllthewatertank
orboiler.Overllingmay
result in a possible electrical
shock, emission of boiling
water; scalding and steam
generation may be affected.
32. Exposure to hot steam can
cause scalding.
33. Do not use the product to
clean stairs.
34. Burns can occur from touching
hot parts, hot water or steam.
35. Use caution when draining
the appliance after use as
there may be hot water in the
appliance.
36. Do not attempt to change
the attachments while the
appliance is emitting steam.
37. Do not leave the appliance
unattended when it is
connected to a power supply
or an electrical outlet.
38. Always disconnect the power
plug (even when it will be
unattended for a short period
of time).

8
WARNING! Danger of scalding. Please use the cleaner with
caution. The steam emitted from the cleaner is very hot.
CAUTION! Recently cleaned surfaces may be hot,
please avoid contact.
39 Do notcleanoveroor
electrical outlets.
40. Ensure that the appliance
does not operate on an empty
tank.
41. Do not apply steam directly to
very cold glass surfaces.
42. Only water should be used in
this appliance. Use distilled/
puriedwaterifthetapwater
in your area is very hard.
43. Damage caused by improper
use of steam on objects,
materials, persons or animals
or by not observing the
instructions in this manual will
void warranty.
44. Always store the appliance
indoors.

9
Pro Multi Steamer
BEFORE YOU BEGIN
Please read this manual before operating the cleaner
Thiswillensureyouobtainfullbenetfromyournewcleaner.Keepthis
Instruction Manual in a handy place for future reference.
IMPORTANT!
The heat generated and steam pressure may have adverse
consequences for certain materials. Always check before putting
the appliance into operation as to whether the surface or material is
actually suitable for treatment with steam. Do this by executing a test
on a hidden surface of the material you wish to treat. Do not attempt
to open the drainage cap when the cleaner is in use. The boiler is
pressurised.

10
1. Do not operate the cleaner too close to heaters,
radiators or other hot surfaces.
2. Before inserting the power plug into the power supply,
make sure your hands are dry.
3. When unplugging the power plug from the power supply,
do not use the power cable, gently pull the power plug
from the power supply.
4. Do not attempt to open the drainage cap when the
cleaner is in use. The boiler is pressurised.
Before You Clean, Test First.
IMPORTANT! The heat generated and steam pressure may have
adverse consequences for certain materials. Always check before
putting the appliance into operation as to whether the surface or
material is actually suitable for treatment with steam. Do this by
executing a test on a hidden surface of the material you wish to treat.
Yourcleanerisnotforuseonunsealedoorboards.Forthe
best results test in an inconspicuous area and check the care
instructionsfromyourooringmanufacturer.
Precautionary measures:

11
Pro Multi Steamer
ASSEMBLY
IMPORTANT! THE CLEANER SHOULD BE SWITCHED OFF BEFORE ASSEMBLY.
EXTENSION TUBES
1. Connect the extension tube to the
handle. Push the extension tube into the
handle until it clicks into position.
2. Connect the second extension tube to
theendoftherstextensiontubeuntilit
clicks into position.
STEAM MOP HEAD
1. Connect the extension tubes to the
handle of the cleaner as per the
instructions in this manual. Insert the
extension tube into the mop head
ensuring that it clicks into position.
2. Attach the mop pad onto the base of
the mop head, as shown.

12
ACCESSORY BAG
1. The accessory bag can be attached
onto the cleaner by sliding the accessory
bag hook onto the cleaner, as shown.

13
Pro Multi Steamer
ACCESSORIES
IMPORTANT! The cleaner should be switched off before tting or
removing accessories.
STEAM MOP HEAD
Idealforcleaninghardoorsandsanitising
carpets. The detachable Scrubbing Head can
be used for cleaning stubborn stains.
CARPET GLIDER
The Carpet Glider attachment is used for
sterilising carpeted surfaces.
EXTENSION TUBES
Allows the accessories to be attached onto
the extension tubes for long reach cleaning.

14
WINDOW SQUEEGEE
Perfect for cleaning windows and glass
surfaces.
ACCESSORY BAG
Allows you to conveniently store your
accessories to quickly and easily access
during operation.
ACCESSORY CONNECTOR
Enables the specialised cleaning brushes and
jet nozzle to be connected to the cleaner.
OVEN STEAM NOZZLE
Provides a concentrated jet of steam for
cleaning ovens.
CAUTION! The metal rod will become hot
during operation which can cause burns. Do
not touch the metal rod during operation.
Allow the metal rod to cool down completely
before handling.

15
Pro Multi Steamer
SPECIALISED CLEANING BRUSHES AND JET NOZZLE
For cleaning a variety of surface such as: taps, sinks, windows, mirrors,
oors,benchtops,toilets,doorhandlesandBBQ’s.

16
OPERATION
FILLING THE WATER TANK
1. Remove the water tank by pulling on the
Water Tank Handle.
2. UnscrewtheWaterTankCapandllthe
water tank with cold tap water. During
operation,thewatertankcanbelled
by unscrewing the Water Tank Cap and
llingthewatertankwithcoldtapwater.
IMPORTANT: Do not add chemicals, detergents, disinfectant, eucalyptus
oil or perfumes into the Water Tank.

17
Pro Multi Steamer
USING THE VARIABLE STEAM DIAL
The steam output can be controlled by using
the Variable Steam Dial.
1. Simply turn the dial towards “Max” to
increase the steam output and turn
the dial towards “Min” to reduce the
steam output.
“MIN”
“MAX”

18
STATUS LIGHT INDICATOR
Illuminates blue
to indicate that
the cleaner has
been turned on.
Attention: If the cleaner is sitting on idle for 2 hours, it will automatically
switch the boiler heater off. In this situation the On/Off indicator will stay
ashing Blue.
When the steam release trigger is activated, the cleaner will switch on
the boiler heater. The On/Off indicator will stay on Blue.
Illuminates green to
indicate that the cleaner
is ready for use.
Illuminates red to indicate that the
watertankrequireslling.

19
Pro Multi Steamer
STEAM CLEANING HARD FLOORS
NOTE: Before using the cleaner, sweep or vacuum the oor to remove
any loose dirt or debris.
IMPORTANT! Do not use the cleaner without a mop pad attached onto
the mop head.
NOTE: Do not use the Carpet Glider when cleaning hard oors.
WARNING! Hard oor wax may be removed by the heat and steam
action. Do not use the cleaner on unsealed oorboards or operate the
cleaner in a stationary position for an extended period of time.
IMPORTANT! Contact your ooring supplier to identify whether it is
suitable to use the cleaner on your ooring.
1. Plug the power plug into the power
supply. Press the On/Off button and select
the appropriate steam level by using the
Variable Steam Dial.
2. When the Steam Indicator illuminates
green, as shown, the cleaner is ready for
use.
3. With your foot placed onto the mop
head, pull the handle backwards to
unlock the cleaner.
Steam
Indicator

20
IMPORTANT! Do not operate the cleaner over the power cable.
IMPORTANT! Keep the mop head moving during operation. Operating
the mop head in a stationary position for an extended period of time
can cause damage to the oorboards and make the ooring slippery.
Attention: If the cleaner is sitting on idle for 2 hours, it will automatically
switch the boiler heater off. In this situation the On/Off indicator will stay
ashing Blue.
When the steam release trigger is activated, the cleaner will switch on the
boiler heater. The On/Off indicator will stay on Blue.
4. To produce steam press the Steam Trigger on
the handle.
5. When steam is emitting from the cleaner
slowly pass over the surface to be cleaned.
This manual suits for next models
1
Table of contents