WESTECH WT-F002-3Classic User manual

http://www.westechlighting.com Copyright ©2016 WESTECH. All Rights Reserved.
特点和性能
可以太阳能供电，也可以市电充电；
体积小，机构简单，易于安装
高亮度 LED
自主运行时间长
■多档位调节
Features and Benefits
Solar Powered Directly and AC Charging
Compact. Portable and durable
High luminance LED
Running long time after fully charged
■Multi file adjustment
应用
室内照明
走廊庭院照明
露营及业务作业
灾难救生照明
Application
Indoor Lighting
Corridor court Lighting
Camping and field operation
Lighting disaster lifesaving
Solar LED Lanterns
Mode: WT-F002-3Classic
3W Solar Panel
220V Charging Interface

http://www.westechlighting.com Copyright ©2016 WESTECH. All Rights Reserved.
Solar LED Lanterns WT-F002-3 Specifcation
Product Code WT-F002-3
Number of LED Per Lantern SMD 24PCS
Ingress Protection IP20
AC Input 110-220V 50/60Hz
Solar Charging Input DC Jack 9V
LED information:
Lamp Brightness 350lumens for high brightness
20 Lumens for high brightness
Lamp Power 5W
Lifetime of LED LM-80
Color Temperature 5500-6500K
Battery Information:
Battery Type Sealed Maintenance Free (SMF) lead acid battery
Battery Back Up 6V 4.5AH
AC Charging Time 20-24Hrs
Solar Charging Time 9-14Hrs
Working Time 10-14Hrs with high brightness；
20Hrs with low brightness；
Packing Information(Lamp Only)
：
Unit Dimension 110*115*200
Inner Packing Size 190*190*288
outer Packing Size 775*395*310
Gross Weight Per Box 11.8Kg
Solar Panel
Solar LED Panel Type 3W 9.0V .0.25A Polycrystalline Solar Panel
Solar Panel Dimensions 235*140*17mm
Solar Panel connecting cable length 2M
Solar Panel characteristics A stand at the back of solar panel to maintain 30 degrees facing to the
Sun.

http://www.westechlighting.com Copyright ©2016 WESTECH. All Rights Reserved.
Solar LED Lanterns WT-F002-3 Specification
Operation Information 1. Please read the instructions and fully charged before Use;
2.
Before plugging in an external battery or power supply, please make sure if the
power supply is correct;
3. During the use
process, when the LED lamp brightness get dimmed and batteries
become fully discharged state, in order to protect the battery，please stop using
and charge it in time at this time. Shouldn't charge after the LED lamp is completely
no light, because easily lead to excessive discharge battery failure extremely;
4. Must use more than 8 hours every three months;
5. Make the lamp off when not in use
6. When the temperature is below 0 degrees or above 40 degrees, use and charging
efficiency will be reduced;
7. Do not go near water or rain;
Maintenance 1. solar panel surface clean
2. The solar panel surface cannot be scratched and damaged.
Scrap products 1.
In order to reduce pollution of the environment, please do not throw the battery,
battery to a designated disposal agency or the designated bins.