WESTECH WT-F001-3 User manual

http://www.westechlighting.com Copyright ©2016 WESTECH. All Rights Reserved.
特点和性能
可以太阳能供电，也可以市电充电；
体积小，机构简单，易于安装
高亮度 LED
自主运行时间长
■多档位调节
Features and Benefits
Solar Powered Directly and AC Charging
Compact. Portable and durable
High luminance LED
Running long time after fully charged
■Multi file adjustment
应用
室内照明
走廊庭院照明
露营及业务作业
灾难救生照明
Application
Indoor Lighting
Corridor court Lighting
Camping and field operation
Lighting disaster lifesaving
Solar LED Lanterns
Mode: WT-F001-3Classic
220V Charging Interface
3W Solar Panel

http://www.westechlighting.com Copyright ©2016 WESTECH. All Rights Reserved.
Solar LED Lanterns WT-F001-3 Specifcation
Product Code
WT-F001-3
Number of LED Per Lantern
SMD2835 36PCS
Ingress Protection
IP20
AC Input
110-220V 50/60Hz
DC Input
DC Jack 6V
LED information:
Lamp Brightness
260 lumens for high brightness
50lumens for low brightness
Lamp Power
4W
Lifetime of LED
LM80
Color Temperature
5500K-6500K
Battery Information:
Battery Type
Sealed Maintenance Free (SMF) lead acid battery 4V.2.0AH
Battery Buck Up
4V 2.0AH
AC Charging Time
10-12Hrs
Solar Charging Time
14-15Hrs
Working Time
3-4Hrs with high brightness
≥20Hrs with low brightness
Packing Information(Lamp Only):
Unit Dimension
123*123*173mm
Inner Packing Size
126*126*180
Outer Packing Size
650*270*380
Gross Weight Per Pcs
450g/Pcs
Solar Panel:
Solar LED Panel Type
3W 6.0V .0.5A Polycrystalline Solar Panel
Solar Panel Dimensions
235*140*17 mm
Solar Panel connecting cable length
2M
Solar Panel characteristics
A stand at the back of solar panel to maintain 30 degrees facing to the Sun.

http://www.westechlighting.com Copyright ©2016 WESTECH. All Rights Reserved.
Solar LED Lanterns WT-F001-3 Specifiztion
Operation Information
1. Please read the instructions and fully charged before Use;
2. Before plugging in an external battery or power supply, please make sure if the
power supply is correct;
3. During the use process, when the LED lamp brightness get dimmed and batteries
become fully discharged state, in order to protect the battery，please stop using
and charge it in time at this time. Shouldn't charge after the LED lamp is completely
no light, because easily lead to excessive discharge battery failure extremely;
4. Must use more than 8 hours every three months;
5. Make the lamp off when not in use
6. When the temperature is below 0 degrees or above 40 degrees, use and charging
efficiency will be reduced;
7. Do not go near water or rain;
Maintenance
1. solar panel surface clean
2. The solar panel surface cannot be scratched and damaged.
Scrap products
1. In order to reduce pollution of the environment, please do not throw the battery,
battery to a designated disposal agency or the designated bins.