Western Digital WD1600AVBB User manual

CE Hard Drives
• Long-Term Reliability – With a MTBF of 1 million hours, these
drives are designed to last in high temperature always-on streaming
digital audio/video environments such as PVR/DVR, DVR recorders,
and surveillance video recorders.
• Quiet – Noise levels have been minimized to less than
one sone* – virtually below the threshold of human hearing.
• Low Power, Cool Running – WD AV drives deliver best-in-class
low power consumption for reduced system power requirements
and increased reliability.
• Compatible – Tested for compatibility in a broad range of
AV products including set top boxes, DVD recorders, and
mainstream surveillance systems.
WD AV
Hard Drives
Reliable
Cool and Quiet
Compatible
Technology Features
SilkStream™–Optimized for smooth, continuous digital video playback of up to
twelve simultaneous HD streams.** SilkStream is compatible with the ATA
streaming command set allowing CE customers to use standard streaming
management and error recovery options.
IntelliSeek™–Optimizes seek speeds to lower power consumption, noise
and vibration.
Ramp Load –Parks the recording heads off the disk surface during spin up,
spin down, and when the drive is off. This ensures the recording head never
touches the disk surface resulting in improved long term reliability due to less
head wear, and improved non-operational shock tolerance.
Preemptive Wear Leveling (PWL) –The drive arm frequently sweeps across
the disk to reduce uneven wear on the drive surface common to audio video
streaming applications.
WD AV SATA and EIDE drives are ideal for PVR/DVR, DVD recorders,
surveillance video recorders, and other video streaming applications.
*A sone is a subjective unit of loudness as perceived by a person with normal hearing.
**Assumes Host Transfer Block size of 2 MB per stream.
Designed for demanding
audio and video environments.

Physical Specifications
80 GB (1 Disk) 160 GB (1 Disk) 250 GB (2 Disk) 320 GB (2 Disk) 500 GB (3 Disk)
SATA model numbers WD800AVBS
WD800AVJS
WD1600AVBS
WD1600AVJS
WD2500AVBS
WD2500AVJS
WD3200AVBS
WD3200AVJS
WD5000AVJS
EIDE model numbers WD800AVBB
WD800AVJB
WD1600AVBB
WD1600AVJB
WD2500AVBB
WD2500AVJB
WD3200AVBB
WD3200AVJB
WD5000AVJB
Formatted capacity 1 80,026 MB 160,041 MB 250,059 MB 320,072 MB 500,107 MB
User sectors per drive 156,301,488 312,581,808 488,397,168 625,142,448 976,773,168
Interface SATA 300 MB/s
40-pin EIDE
SATA 300 MB/s
40-pin EIDE
SATA 300 MB/s SATA 300 MB/s SATA 300 MB/s
Form factor 3.5-inch 3.5-inch 3.5-inch 3.5-inch 3.5-inch
Bytes per sector (STD) 512 512 512 512 512
Dedicated landing zone Yes Yes Yes Yes Yes
Actuator latch/auto park Yes Yes Yes Yes Yes
SATA latching connector Yes (SATA models only) Yes (SATA models only) Yes Yes Yes
RoHS compliant2 Yes Yes Yes Yes Yes
Power Requirements (2 Disk Models)
6
Power Requirements (3 Disk Models)
6
Environmental Specifications 7
Shock
Vibration
Operating Ambient Temperature & Humidity
Non-Operating Temperature & Humidity
Acoustics (average)8
Reliability
Mode 12V (±10%) 5V (±5%) Power
Read/Write 395 mA 660 mA 7.8W
Idle 380 mA 532 mA 7.2W
Standby 6 mA 180 mA 0.97W
Sleep 6 mA 180 mA 0.97W
Mode 12V (±10%) 5V (±5%) Power
Read/Write 460 mA 650 mA 8.77W
Idle 450 mA 600 mA 8.4W
Standby 6 mA 180 mA 0.97W
Sleep 6 mA 180 mA 0.97W
Operating (2 ms) 30G (read/write), 65G (read)
Non-operating (2 ms) 350G
Half sine wave measured in 2 ms duration, measured without isolation.
Operating - Random 0.004 g 2/Hz (10 to 300 Hz)
- Linear 20-300 Hz, 0.75G (0 to peak)
Non-operating - Random 0.05 g 2/Hz (10 to 300 Hz)
- Linear 20-500 Hz, 4.0G (0 to peak)
Temperature 0° C to 60° C
Humidity 5-95% RH non-condensing
Thermal Gradient 20° C/hour max
Temperature -40° C to 65° C
Humidity 5-95% RH non-condensing
Thermal Gradient 30° C/hour
Model 1 Disk 2 Disk 3 Disk
Idle mode 24 dBA 25 dBA 28 dBA
Quiet seek mode 25 dBA 26 dBA 29 dBA
MTBF 1,000,000 hours
Warranty93-year limited
Performance Specifications
Data Transfer Rate
Average read seek 15 ms
Physical Dimensions
Power Requirements (1 Disk Models)
6
Buffer to host - SATA 300 MB/s 3
Buffer to host - EIDE 100 MB/s (Mode 5 Ultra ATA) 4
66.6 MB/s (Mode 4 Ultra ATA) 4
33.3 MB/s (Mode 2 Ultra ATA) 4
16.6 MB/s (Mode 2 DMA) 4
16.6 MB/s (Mode 4 PIO) 4
Buffer to disk 972 Mbits/s max
Track-to-track seek 2.0 ms (average)
Average latency 4.2 ms
Rotational speed 7200 RPM
Read cache Adaptive
Write cache Yes
Buffer 2 MB (WDxxxxAVBx)
8 MB (WDxxxxAVJx)
Average drive ready time 6.5 sec (1 disk models)
11.0 sec (2 disk models)
12.5 sec (3 disk models)
Start/stop cycles550,000 min
Error rate
(non-recoverable) <1 in 10 15 bits read
Height 1.028 in. (25.4 mm) max
Length 5.787 in. (147.0 mm) max
Width 4.0 in. (101.6 mm) ± .01 in.
Weight (1 disk models) 1.07 lb. (0.485 kg) ± 10%
Weight (2 disk models) 1.33 lb. (0.60 kg) ± 10%
Weight (3 disk models) 1.39 lb. (0.63 kg) ± 10%
Mode 12V (±10%) 5V (±5%) Power
Read/Write 280 mA 650 mA 6.61W
Idle 270 mA 600 mA 6.24W
Standby 6 mA 180 mA 0.97W
Sleep 6 mA 180 mA 0.97W
For service and literature:
support.wdc.com
www.westerndigital.com
Western Digital, WD, and the WD logo are
registered trademarks; and SilkStream and
IntelliSeek are trademarks of Western Digital
Technologies, Inc. Other marks may be
mentioned herein that belong to other
companies. Product specifications subject to
change without notice.
© 2007 Western Digital Technologies, Inc.
All rights reserved.
Western Digital
20511 Lake Forest Drive
Lake Forest, California U.S.A. 92630
2879-701220-A04 April 2007
800.ASK.4WDC North America
949.672.7199 Spanish
+800.6008.6008 Asia Pacific
+31.20.4467651 EMEA
1One gigabyte (GB) = one billion bytes. One terabyte (TB) = one trillion bytes. Total accessible capacity varies depending on operating environment.
2WD hard drive products manufactured and sold worldwide after June 1, 2006, meet or exceed Restriction of Hazardous Substances (RoHS) compliance requirements as
mandated by the European Union for electrical and electronic products. The RoHS Directive 2002/95/EC of the European Parliament, which is effective in the EU beginning
July 1, 2006, aims to protect human health and the environment by restricting the use of certain hazardous substances in new equipment, and consists of restrictions on lead,
mercury, cadmium, and other substances.
3Effective maximum native SATA 300 MB/s transfer rate.
4Maximum burst rate running the specified PIO, DMA, or Ultra ATA transfer mode.
5Controlled unload at ambient condition.
63.3V SATA power not utilized in this product.
7No non-recoverable errors during operating tests or after non-operating tests.
8Sound power level.
9Three-year limited warranty unless otherwise required by law.
WD AV
Hard Drives
CE Hard Drives