Westwood Design WOODLAND ADVENTURES DP-TR-3109GR-ELM User manual

WOODLAND ADVENTURES
Toddler Guard Rail
Model: DP-TR-3109GR-ELM
(TR-3109GR)
RTG SKU #: 39331082
Assembly Instruction

Congratulations on your purchase of a Westwood product. We take great pride in
the quality and design of our furniture. The safety of your child is our highest
priority. It is important that you read these instructions carefully and completely to
ensure that this product functions as it was designed.
After opening the package, check to see that all the parts are present. If you think
something is missing, please contact your retailer, and they can arrange to have
the missing parts quickly replaced. You can also contact us directly, by calling
1-908-719-4707, or emailing [e-mail]
If any aspect of these instructions is unclear, please contact your retailer or
Westwood Design for assistance.
In addition to meeting our own extensive in-house testing and standards, this crib
has been independently tested to meet JPMA certification standards.
635 N. Billy Mitchell Rd.,
Salt Lake City, UT 84116
Phone: [phone]
www.westwoodbaby.com

- READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS FOR
FUTURE USE.
- PREVENT BURNS. KEEP BED AWAY FROM OPEN FIRES AND OTHER HEAT SOURCES.
- ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 IN. (69 CM.) BY 51-5/8
IN. (131 CM.), WITH A THICKNESS NOT EXCEEDING 6 IN. (15 CM.). THE DIMENSIONS
OF THE MATTRESS SHOULD BE TAKEN FROM SEAM TO SEAM.
- THE MINIMUM AGE OF THE INTENDED USER SHALL NOT BE LESS THAN 15 MONTHS
AND THE MAXIMUM WEIGHT SHALL NOT BE GREATER THAN 50 LBS (22.7 KG)
- PROVIDE GUARD MUST BE USED.
- DO NOT PLACE BED NEAR WINDOWS WHERE CORDS FROM DRAPES OR BLINDS
MAY STRANGLE A CHILD.
- DO NOT PLACE ITEMS WITH A STRING, CORD, OR RIBBON AROUND A CHILD’S
NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS.
- DO NOT SUSPEND STRINGS OVER A TODDLER BED FOR ANY REASON.
IMPORTANT!
- CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING
PARTS OR SHARP EDGES BEFORE ASSEMBLY AND PERIODICALLY DURING USE. DO
NOT USE CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT
WESTWOOD DESIGN: 635 N. BILLY MITCHELL RD., STE. B, SALT LAKE CITY, UTAH
84116, PHONE: [phone]; EMAIL: [e-mail] FOR
REPLACEMENT PARTS AND INSTRUCTIONS IF NEEDED. NEVER SUBSTITUTE PARTS.
FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH.
WARNING
FOR TODDLER BED USE

Required Parts & Hardware
Allen Wrench
Step 1
Remove the bolts from the footboard using the allen wrench provided.
Keep the footboard for future use.

Required Parts & Hardware
Allen Wrench
Step 2
Secure the toddler guard rail with the 4 bolts and tighten firmly with the Allen Wrench provided.
The toddler bed can only be used with the mattress support in its lowest position.
Made in Vietnam
Step 3
G
FDay Bed Cap, Left (x1)
**from crib package**
Day Bed Cap, Right (x1)
**from crib package**
G
F

- After completing assembly, check that all bolts and screws are secure and tight. Hardware
can become loose over time, so it is your responsibility to periodically check the tightness
of all fasteners for as long as you use the crib.
- Wood is a natural material. As such, it can be affected by changes in temperature and
humidity. Extreme changes in humidity and temperature can cause the wood to warp, swell,
crack, or shrink, thus compromising the structural integrity of the crib and making it
dangerous to use.
- Use caution when placing the crib in storage to avoid extremes in temperature or
humidity. Cribs should always be stored indoors in climate controlled, dry locations.
- Use care when using a vaporizer or humidifier around the crib. Do not aim the vapor at
the crib or any other wooden furniture in the nursery. Avoid using vaporizers or humidifiers
for extended periods of time.
- To clean the crib, wipe with a damp cloth and immediately the dry the surface. Do not use
any chemical cleaners or polishes. Such products can leave a residue on the finish and
come in contact with your child.
- Your crib has a durable and protective non-toxic finish. However, if you decide to refinish
it, you must use a non-toxic finish specified for children’s products. Do not use any toxic
stripping methods to remove the old finish.
CARE AND MAINTENANCE
635 N. Billy Mitchell Rd.,
Salt Lake City, UT 84116
Phone: [phone]
www.westwoodbaby.com