Wetstyle deco User manual

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
1/14
CAUTION – IMPORTANT
TWO PEOPLE ARE NEEDED TO HANDLE AND INSTALL VANITY
DO NOT LIFT VANITY FROM THE TOP. LIFT VANITY FROM THE
OTTOM ONLY.
DO NOT LIFT FROM SINK TOP
WILL DAMAGE VANITY
LIFT FROM EACH SIDE, NOT THE FRONT OR BACK

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
2/14
DECO VANITY INSTALLATION GUIDE
INDEX
Before yo begin p.1
Installation
•Wall preparation p.4
•Pl mbing p.5
•Handling p.6
•Wall mo nted vanity p.7
•Floor mo nted vanity p.8
•Drawer adj stments p.11
•Cleaning g ide p.13
•Warranty p.14
BEFORE YOU BEGIN
Thank you for choosing from WETSTYLE’s line of quality products.
Please note that prior to shipment from the manufacturing facility, the furniture you
have received has passed quality control and was in excellent condition upon leaving
the WETSTYLE facility.
We recommend that you carefully inspect the product prior to its installation. If there
are any defects, please contact the dealer from whom you purchased the product
and please DO NOT install the furniture. WETSTYLE will not be held responsible for any
defects or damage discovered once the furniture is installed.
It is highly recommended that a professional undertake the installation of the vanity.
Please read this guide carefully to ensure the proper installation and reliability of your
product for many years to come.
For assistance, please call customer service at 1.888.536.9001.

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
3/14
WARNING!
To reduce the risk injury to persons, please read these instructions thoroughly before using
this product.
Important Safety Instructions must be kept for future use.
TOOLS AND EQUIPMENT
• Drill and bits
• Measuring tape
• Protective paper
• Pencil
• Level
•Protective eyeglasses
•Wood Screw #10, 3” and 4” long
IMPORTANT
This installation might require custom placement of studs relative to the position of the
product in the room. Please read the instructions related to your vanity model carefully.

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
4/14
DECO vanities require special wall preparation prior to installation of the unit.
Wall Preparation
1.1 Make sure that walls and floor are straight and level.
1.2 Determine overall vanity dimensions.
1.3 Determine the desired location of the vanity.
1.4 The distance between studs should not be more than 16".
1.5 Metal studs should be reinforced vertically by 2" x 4" wooden studs.
1.6 Metal and wooden studs should be reinforced horizontally with 2" x 6" wooden
studs at anchoring heights:
• 29-3/16" along the full width of the vanity
1.7 Do not apply the product to the wall surface until all braces and mounting clips
have been installed and all plumbing has been completed.
Vanity: 34-1/2” from floor (Floor
mounted)
Z-clip height: 31-5/16”
Z-clip anchor height: 29-3/16”
(Stud center line)
* See diagram on page 4
29-3/16”
Anchor height
(Stud center line)

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
5/14
VANITY PREPARATION
Prior to installation,
PLUMBING
The pipes should be positioned at an approximate height of 23-5/8" or within the
connection area depicted bellow.
IMPORTANT
Please be advised that the DECO COLLECTION was designed to receive WETSTYLE DECO
sinks and countertop style sinks as noted in the WETSTYLE price list and catalogue. The
manufacturer does not take responsibility for the use of third party sink or countertop in
conjunction with the DECO vanity.
Deco sinks have been factory installed and should not be removed.
Deco Vanity – Back View
48” Floor-Mount Model Shown)

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
6/14
CAUTION - IMPORTANT
TWO PEOPLE ARE NEEDED TO HANDLE AND INSTALL VANITY
DO NOT LIFT VANITY FROM THE TOP. LIFT VANITY FROM THE OTTOM ONLY.
DRAWER REMOVAL
1. Remove Vanity drawers and cover glides with masking tape to protect them from
dust.
Drawer Insertion and Removal
Insertion Removal

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
7/14
IMPORTANT
All DECO VANITIES must be securely wall-mounted with the custom Z-clips provided with
the furniture.
A – WALL MOUNT (-WM)
1. Remove Z-Clip from back of vanity. Align and level the Z Clip according to
horizontally reinforced studs and desired Vanity height.
2. Space Z-clip and screws evenly along width of the Vanity.
3. Install Z-clip to the wall studs at 29-3/16” center line, using evenly spaced 3" long
#10 wood screws. Fasten securely.
4. Position temporarily the Vanity onto Z-clip.
48” Model Shown
5. In addition to the wooden Z Clip system, the wall-mounted vanity must be
attached to the back wall. Pre-drill pilot holes to accommodate 4” long #10
Wood screws. From inside the vanity, screw the unit every 3” to the back wall.
Level
C
L
Level onto Wall
C
L
Z Clip
Z Clip on wall

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
8/14
CAUTION: DO NOT LIFT FROM THE TOP. LIFT VANITY FROM THE OTTOM ONLY.
B – FLOOR MOUNT (-FL)
1. Remove Z-Clip from back of vanity. Align and level the Z Clip according to
horizontally reinforced studs and desired Vanity height.
2. Space Z-clip and screws evenly along width of the Vanity.
3. Install Z-clip to the wall studs at 29-3/16” center line, using evenly spaced 3" long
#10 wood screws. Fasten securely.
4. Gently turn vanity on its back for Leg assembly.
5. Un-package Deco Vanity Legs and align with mounting holes. Handle with caution.
C
L
Level onto Wall
C
L

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
9/14
6. Fasten and secure legs tightly from the inside with provided ¼-20 threaded bolts and
Allen key.
Quantity: 6x bolts/leg)
7. Position and install DECO floor mounted shelf. Fix securely with provided bolts.
Note: Shelf to be flush with backside of vanity.
CAUTION: DO NOT LIFT FROM THE TOP. LIFT VANITY FROM THE OTTOM ONLY.
8. Gently turn the vanity onto its feet by handling with care.

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
10/14
CAUTION: DO NOT LIFT FROM THE TOP. LIFT VANITY FROM THE OTTOM ONLY.
9. Position temporarily the Vanity onto Z-clip.
10. Secure the floor mounted vanity to the back wall. Pre-drill pilot holes to
accommodate 4” long #10 Wood screws. From inside the vanity, screw the unit
every 3” to the back wall.
11. Adjust levellers.
12. Install drawers. (See drawer insertion on page.6)
Rotate foot to adjust height
Level
Z Clip on wall

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
11/14
DRAWER ADJUSTMENTS
48” Floor-mounted version shown
Drawer façade adjustments
Full depth Main
drawers
Full depth Inner pull-out
drawers
Offered on
Freestanding models
only)

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
12/14
Drawer façade removal

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
13/14
CLEANING GUIDE
WETSTYLE «DECO» FURNITURE is made from oak or walnut.
WETSTYLE Furniture is ultra-easy to clean: after each use, simply wipe with a soft cloth to
remove any surface dirt or excess water.
CAUTION:
Vanity side panel seams must remain dry.
Wipe away any excess water from vanity side panel seams sweeping towards lavatory
basin.
For standard cleaning, we recommend using warm water with mild soap. Do not use
abrasive products or cream cleaners. Never use petroleum-based products when cleaning
the wood, i.e. paint thinners or other solvents, as they may damage the wood surface.
Glass surfaces may be cleaned using standard glass cleaning products.
Vanity side panel seam

- DECO VANITY INSTALL GUIDE -
(2018-12-04)
14/14
WARRANTY
The warranty on WETSTYLE products covers all defects in materials and manufacturing for a
period of one year from the date on which the owner originally purchased the product
directly from WETSTYLE or from an authorized retailer. This warranty is valid for the original
owner only. This warranty does not apply to cases in which a product was incorrectly
installed, or to damage due to negligence, misuse, cigarettes, flames, natural disasters or
other accidents.
WETSTYLE is not responsible for any fees or recovery charges that may have been
generated by the purchase of a product that is not adequate for an existing building
structure.
At the discretion of the manufacturer, the guarantee is limited to the repair or replacement
(of a product of equal or greater value) at the condition that the claim is made during the
guarantee period to an authorized dealer or directly to WETSTYLE. The handling fees and all
other charges related to the product replacement are not covered by the guarantee.
Printed in Canada
www.WETSTYLE.CA – Montreal – Canada
Tel. [phone] – Fax. [phone]