WhatsGPS S18 User manual

Model:S18
User Manual
2G Vehicle GPS Tracker

Installation instructions

Install SIM card
Open the face cover and insert the SIM card in the
right direction as shown in the picture below
(note: insert SIM card must be done in shutdown
state)
Fill in the mobile phone number in the box below, so
that you can recharge later or check the working
status of the locator.
(if there is no phone number on the back of the card,
the 20-digit ICCID number on the back of the card)
Note: SIM card needs to open GPRS flow function,
SMS alarm needs SIM card support to achieve!

Switch on/off
Switch on:
When the terminal is turned ON for the first time, in the
shutdown state, turn the switch to the ON position.
GSM(green) light and GPS (blue) light of the host
slowly flash to indicate normal startup. The GPS
module starts to search for signals. If the device has
been unable to locate, it will start to dial and send
data online after 3 minutes, and then enter the sleep
state after sending data.
Time mode wake up or light sense wake up, data
send state as above.
Switch OFF:
in the power on state, turn the switch to OFF position
and the host machine will shut down immediately.

Installation site
Login monitoring interface
and install mobile APP
Please log in the dealer designated location service
platform for corresponding Settings and functional
operations.
Account: IMEI (in the sticker)
Password: 123456
Please log in the dealer's designated website to
download the mobile client software for installation
The GPS antenna of the positioner is on the front of the
main engine, try to make sure that the main engine is
facing the sky. The front of the main engine cannot be
completely covered by metal and buildings, or it will
lead to positioning or positioning accuracy is poor.

Installation site
Notice :
1. The magnet on the back of the product cannot be
directly exposed to high temperature, such as the
exhaust pipe of the car, or the magnet will fail.
2. The phone card in the device needs to be paid
regularly, and the device cannot be monitored offline
due to the arrears.
3. After the GPS is installed for the first time, be sure
to test the normal monitoring before leaving.
4. The strong magnetic on the back of the host cannot
touch the hard disk digital products, which will cause
damage to the hard disk.
5. If there is any problem in use, please contact the
dealer's customer service.
Type Status
Commu
nication
indicator
(Green)
Location
indicator
(Yellow)
Fast flash: Working, device online
Fast flash: Located
Slow flash:Search the Signal, but
can not locate
Dark:GPS module broken, powerswitch
OFF or device goes to sleepmode
Slow flash: GPRS with signal
Dark: Abnormal communication,
power switch OFF or device goes to
sleep mode

Functions
Functions Specifications
Timed return
mode
Timing return, according to the
set time return position data
Week pattern
Set a time point and choose a
day or days of the week to send
location data after sleep
Alarm clock
mode
Up to 4 groups of wake up time
can be set every day. Wake up
automatically at the set time and
sleep after sending location data
When GPS can not locate the
case automatically enable base
station location
Detection from dark to light when
the realization of anti - demolition
alarm
When the terminal detects the
pseudo-base station, it will reject
the connection and prevent
detection
Strong magnetic device
Base
station +GPS
positioning
Tamper alarm
Anti-fake base
station
No-wiring
installation

Parameter
Model：S18
Location Type：GPS/BDS/LBS positioning
Checking method：PC/IOS/Android
Frequency ：850/900/1800/1900
Antenna：GSM
Alarm：Fence alarm, Overspeed alarm,Disassemble
alarm
GPS：GPS/BDS
GPRS：CLASS B
Battery：3.3V/4200mAh
Standby time：3 year
Size：73*42*31mm
Weight：100G
Working temperature：-25°C~75°C

Battery safety instructions
If you feel abnormal when operating the device,
please refer to the following problems and solutions. If
you cannot solve the problem, please contact the
seller or service provider
Please use the battery specified by the original factory
of your terminal. The use of any other accessories will
invalidate all warranty services. If the use of
non-original accessories causes damage to the
terminal, the manufacturer will not assume any
warranty responsibility
Do not allow metal objects to short-circuit the
battery contactor
Do not bend or force open the battery
Do not immerse the battery in water or fire
If the temperature is below -25°C~75°C, the battery
will not work
Do not use the battery with deformed appearance,
discoloration, leakage or damaged outer package
Do not decompose or modify batteries
Note: after using up the battery, please replace the
original battery of the manufacturer (note: the used
battery cannot be discarded at will, please pay
attention to put it in the recycling position of the waste
battery for centralized processing).

Troubleshooting
1. The terminal has been unable to connect to the
background server after the first installation. The
background display is not online.
2. The connection platform of the device is normal, but
the satellite positioning is abnormal. In this case,
please check:
1) check whether the main power supply wiring is
correct, pay attention not to connect to the internal
control line of the car;
2) check whether the SIM is installed correctly,
please refer to the installation instructions;
3) check whether the SIM card has opened GPRS
service;
4) check whether the parameters are correct through
PARAM# instruction;
5) check whether the APN configuration is correct;
6) check whether the vehicle is in the area covered
by mobile signal;
7) power on to check the status of LED indicator, both
lights are normally on when the connection is normal;
1) please ensure that the equipment is outdoors;
2) check whether there is interference source or
signal shield around;

3) check the installation position of the equipment,
and make the GPS antenna face outwards, not
towards the metal surface or wires;
4) the GPS signal will be weakened when surrounding
tall buildings block it. Please drive to a place with
open sky to locate it.

Warranty card
Maintenance record
Maintenance shop
Fault description
Maintenance situation
IMEI number
Maintenance
person
Sending date
Maintenance record
Maintenance shop
Fault description
Maintenance situation
IMEI number
Maintenance
person
Sending date