whi T20 User manual

T20 - LED Work Light
PRODUCT SPECIFICATION
The T20 Work Light is a versatile workplace illumination unit with multiple functions:
* Handle and pads for use as a hand-held portable unit. Handle features a mounting hole to allow vertical
mounting options.
* Durable metal mesh protects against impacts, and allows the light to be used confidently in industrial
and construction environments.
* Universal adaptors can be used to chain power from one light to one or more other units.
* 360
° degree illumination provides thorough lighting for large areas.
* High-efficiency LEDs draw little power, require no maintenance, and have a very long service life.
TECHNICAL DETAILS
Model No.
T20 - 60W
T20 - 100W
T20 - 150W
Handle
Step 1: Use the base hook to hang on a secure
fixed wall or object.
Step 2: Ensure the fixed wall or object can
support 30kg
Buckle 90°
Cap
If attaching several lights in a string:
Step 3: Connect the desired number of lights together. Rotate the anti-pull buckle into place to
prevent accidental disconnection.
Step 4: Close the connector cap for the final light in the chain.
INSTALLATION
PLEASE NOTE
Maximum 5A in string configuration
Watts Input lm/W Dimensions Maximum Connections Operating Temp
60W
100W
150W
120V AC
120V AC
120V AC
120 lm/W
120 lm/W
120 lm/W
130 x 130 x 233mm
130 x 130 x 278mm
130 x 130 x 308mm
10 Light String
6 Light String
4 Light String
-30°C to +40°C
-30°C to +40°C
-30°C to +40°C
The T20 Work Light will automatically deactivate if too many units are connected together. When this
occurs, only the first light in the chain will illuminate. When the excess lights are removed, the chain
will turn back on. This can take up to 10 seconds.

WHI Safeguard Limited
Meryll House, 57 Worcester Rd,
Bromsgrove, B61 7DN.
T. 44 (0) 1753 325 101
E. [email protected]
MADE IN CHINA
T20 - LED Work Light
WARNING NOTICES
1) Read this manual carefully before use, and ensure that the lights are used in accordance with the given
guidelines.
2) To reduce the risk of electric shocks and fire, do not exceed the recommended maximum string size for
your lights. This is 10pcs for 60W, 6pcs for 100W, and 4pcs for 150W.
3) These work lights are suitable for use in both dry and damp locations.
4) Work lights should be disconnected from power when wet in order to avoid electric shocks.
5) This unit is not intended to be used as illumination for emergency exits.
6) Do not install this unit in a hot or sealed environment, or allow them to be exposed to corrosive gases,
as this can affect the service life.
7) Do not place any combustible or flammable materials on the lamp surface.
8) This light should be installed, tested and maintained by professionals using appropriate equipment.
9) Check the contents of the package upon receipt, and advise your dealer of any damage.
REMOVING THE HANDLE
MOUNTING INSTRUCTIONS
1-2. Remove the screws 3-4. Bend the handle 90 degrees
towards the screws
5. Lift and remove
12345
CONNECTING EYEBOLT TRIPOD INSTALLATION
WARRANTY INFORMATION
This product is provided with a 5 year warranty. Free repair or
replacement will be offered during this period.
The warranty is not valid if :
* Damage is caused by improper operation or installation of the unit.
* The unit has been dismantled or repaired without authorisation.
* The user cannot supply a valid invoice or proof of purchase.
For assistance after the warranty period expires, please contact your
supplier.