Whirlpool W7WCC065XB User manual

WINDOW AIR
CONDITIONER
Use & Care Guide
For questions about features, operation/performance, parts
or service, call: 1-800-253-1301.
In Puerto Rico, call: 1-787-999-7400.
or visit our website at... www.whirlpool.com
In Canada, for assistance, installation or service,
call: 1-800-807-6777.
ACONDICIONADOR
DE AIRE PARA
VENTANA
Manual de uso y cuidado
Si tiene preguntas respecto a las características, funcionamiento,
rendimiento, partes o servicio técnico,
llame al: 1-800-253-1301.
En Puerto Rico, llame al: 1-787-999-7400.
o visite nuestro sitio de internet en... www.whirlpool.com
CLIMATISEUR
DE FENÊTRE
Guide d’utilisation et d’entretien
Au Canada, pour assistance, installation ou service,
composez le : 1-800-807-6777.
ou visitez notre site web à... www.whirlpool.com
Table of Contents/Índice/Table des matières ...... 2
®

2
TABLE OF CONTENTS
AIR CONDITIONER SAFETY .........................................................3
PRODUCT REGISTRATION...........................................................3
In the U.S.A. .................................................................................3
In Canada .....................................................................................3
INSTALLATION REQUIREMENTS................................................4
Tools and Parts—All Models .......................................................4
Location Requirements—All Models ...........................................4
Electrical Requirements—All Models...........................................5
INSTALLATION INSTRUCTIONS—6300 BTU, 8000 BTU...........6
Unpack the Air Conditioner..........................................................6
Prepare Air Conditioner for Installation........................................6
Prepare Window for Installation...................................................7
Prepare Window with Storm Window or Other Obstruction.......7
Position Air Conditioner ...............................................................7
Complete Installation ...................................................................9
INSTALLATION INSTRUCTIONS—10K BTU, 12K BTU..............9
Unpack the Air Conditioner..........................................................9
Prepare Air Conditioner for Installation......................................10
Prepare Window for Installation.................................................10
Position Air Conditioner .............................................................10
Complete Installation..................................................................12
AIR CONDITIONER USE..............................................................13
Starting Your Air Conditioner .....................................................13
Using the Remote Control..........................................................16
Changing Air Direction ...............................................................17
AIR CONDITIONER CARE ...........................................................17
Cleaning the Air Filter .................................................................17
Cleaning the Front Panel............................................................18
Repairing Paint Damage ............................................................18
Annual Maintenance...................................................................18
TROUBLESHOOTING ..................................................................18
Normal Sounds...........................................................................19
ASSISTANCE OR SERVICE.........................................................19
In the U.S.A. ...............................................................................20
In Canada ...................................................................................20
WARRANTY ..................................................................................20
ÍNDICE
SEGURIDAD DEL ACONDICIONADOR DE AIRE......................22
REGISTRO DEL PRODUCTO......................................................22
En EE.UU....................................................................................22
REQUISITOS DE INSTALACIÓN.................................................23
Herramientas y piezas—todos los modelos..............................23
Requisitos de ubicación—Todos los modelos..........................23
Requisitos eléctricos—Todos los modelos...............................24
INSTRUCCIONES DE INSTALACIÓN—
MODELOS DE 6300 BTU Y 8000 BTU........................................25
Desempaque el acondicionador de aire....................................25
Prepare el acondicionador de aire para la instalación ..............25
Prepare la ventana para la instalación.......................................26
Prepare la ventana con contraventana u otra obstrucción.......26
Coloque el acondicionador de aire en su lugar.........................27
Complete la instalación..............................................................28
INSTRUCCIONES DE INSTALACIÓN—
MODELOS DE 10.000 BTU Y 12.000 BTU..................................28
Desempaque el acondicionador de aire....................................28
Prepare el acondicionador de aire para la instalación ..............29
Prepare la ventana para la instalación.......................................29
Coloque el acondicionador de aire en su lugar.........................29
Complete la instalación..............................................................31
CÓMO USAR EL ACONDICIONADOR DE AIRE........................32
Cómo poner en marcha su acondicionador de aire..................32
Cómo usar el control remoto .....................................................35
Cómo cambiar la dirección del aire ...........................................36
CUIDADO DE SU ACONDICIONADOR DE AIRE.......................36
Limpieza del filtro de aire ...........................................................36
Limpieza del panel frontal ..........................................................37
Reparación de la pintura dañada...............................................37
Mantenimiento anual..................................................................37
SOLUCIÓN DE PROBLEMAS......................................................37
Sonidos normales.......................................................................38
AYUDA O SERVICIO TÉCNICO...................................................39
En los EE.UU. .............................................................................39
GARANTÍA.....................................................................................39
TABLE DES MATIÈRES
SÉCURITÉ DU CLIMATISEUR ....................................................41
ENREGISTREMENT DU PRODUIT.............................................41
Aux États-Unis ...........................................................................41
Au Canada..................................................................................41
EXIGENCES D’INSTALLATION...................................................42
Outils et pièces—tous les modèles ...........................................42
Exigences d’emplacement—tous les modèles .........................42
Spécifications électriques—Tous modèles ...............................43
INSTRUCTIONS D'INSTALLATION—6300 BTU, 8000 BTU .....44
Déballage du climatiseur............................................................44
Préparation du climatiseur pour l’installation ............................44
Préparation de la fenêtre pour l’installation...............................45
Préparation des fenêtres avec fenêtre anti-orage ou
autres obstacles.........................................................................45
Positionnement du climatiseur...................................................45
Achever l’installation ..................................................................47
INSTRUCTIONS D’INSTALLATION—10000 BTU, 12000 BTU.....47
Déballage du climatiseur............................................................47
Préparation le climatiseur pour l’installation..............................48
Préparation de la fenêtre pour l’installation ...............................48
Positionnement du climatiseur...................................................48
Achever l’installation ..................................................................50
UTILISATION DU CLIMATISEUR................................................50
Mise en marche du climatiseur ..................................................51
Utilisation de la télécommande..................................................54
Changement de direction de l'air...............................................55
ENTRETIEN DU CLIMATISEUR ..................................................55
Nettoyage du filtre à air..............................................................55
Nettoyage du panneau avant.....................................................56
Remise en état de la peinture ....................................................56
Entretien annuel..........................................................................56
DÉPANNAGE.................................................................................56
Sons normaux ............................................................................57
ASSISTANCE OU SERVICE.........................................................58
Aux États-Unis............................................................................58
Au Canada..................................................................................58
GARANTIE.....................................................................................59

3
AIR CONDITIONER SAFETY
PRODUCT REGISTRATION
Thank you for purchasing a Whirlpool window air conditioner. In
order to better serve you, please take a moment to register your
product.
When calling or registering online, please know the purchase
date and the complete model and serial number of your air
conditioner. See “Assistance or Service.” Failure to register your
product will not diminish your warranty rights.
Always keep a copy of the sales receipt showing the date of
purchase of your Whirlpool window air conditioner. Proof of
purchase will assure you of warranty coverage.
You MUST Register Your Product For:
■Recall Notifications—Proper registration will enable us to
contact you in the unlikely event of a product safety
notification and, in the U.S.A., assist us in complying with the
provisions of the Consumer Product Safety Act.
■Proof of Ownership—In the case of an insurance loss, such
as fire, flood or theft, your registration will serve as your proof
of purchase.
■Quality Assurance—Call within 10 days; the sooner we have
your information, the better we are able to help you.
Don't Forget—We know you are busy, but registering is
important, quick and easy!
In the U.S.A.
Call the Whirlpool Customer eXperience
Center toll free: 1-800-253-1301, or register online at
https://www.registration.whirlpoolcorp.com/register/. In
Puerto Rico, call 1-787-999-7400.
In Canada
Call the Whirlpool Canada LP Customer eXperience
Centre toll free: 1-800-807-6777, or go online at
https://www.whirlpoolappliances.ca/en/Registration/
Default.html.
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
SAVE THESE INSTRUCTIONS
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.

4
INSTALLATION REQUIREMENTS
Tools and Parts—All Models
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Parts supplied
Check that all parts are included in parts package.
Location Requirements—All Models
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Make sure you have everything necessary for correct installation.
The location should provide:
■Grounded electrical outlet within 6 ft (183 cm) of where the
power cord exits the air conditioner.
NOTE: Do not use an extension cord.
■Free movement of air in room to be cooled.
■A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
■Adequate wall support for weight of air conditioner. Air
conditioner weighs 50 lbs to 75 lbs (22.7 kg to 34 kg).
NOTE: Cabinet louvers must not be obstructed. Air must be able
to pass freely through the cabinet louvers.
Window installation
Window Opening Measurements—Small Chassis:
6300 Btu and 8000 Btu:
■21" (53.3 cm) minimum to 33¹⁄₂" (85 cm) maximum opening
width.
■13¹⁄₂" (34.3 cm) minimum opening height
Window Opening Measurements—Large Chassis: 10k and
12k Btu
■24" (61 cm) minimum to 36" (91.4 cm) maximum opening
width.
■15" (38.1 cm) minimum opening height.
■Phillips screwdriver
■Scissors
■Level
■Tape measure
■Cordless drill and ¹⁄₈" bit
■Pencil
A. Foam seal with adhesive
strip
B. Foam seal without
adhesive strip
C. Window lock bracket
D. Side bracket (on some
models)
E.
³⁄₈ " screws (4) (6300 and 8k models only)
F.
³⁄₄ " screws (5) (6 provided on 10k and 12k
models)
G. Side curtains (2)
H. Top channel seal (on some models)
I. Top channel (on some models)
A
B
C
DEF
G
H
I
A. Cabinet louvers
A. Small chassis: 21" (53.3 cm) minimum;
Large chassis: 24" (61 cm) minimum
B. Small chassis: 13
¹⁄₂ " (34.3 cm) minimum;
Large chassis: 15" (38.1 cm) minimum
A
A
B

5
Electrical Requirements—All Models
The electrical ratings for your air conditioner are listed on the
model and serial number label. The model and serial number
label is located on the right-hand side of the air conditioner
cabinet.
Specific electrical requirements are listed in the “Power Supply
Cord Electrical Requirements” chart. Follow the requirements for
the type of plug shown in the chart.
Recommended Grounding Method
This air conditioner must be grounded. This air conditioner is
equipped with a power supply cord having a grounded 3 prong
plug. To minimize possible shock hazard, the cord must be
plugged into a mating, grounded 3 prong outlet, grounded in
accordance with all local codes and ordinances. If a mating outlet
is not available, it is the customer's responsibility to have a
properly grounded 3 prong outlet installed by a qualified electrical
installer.
It is the customer's responsibility:
■To contact a qualified electrical installer.
■To assure that the electrical installation is adequate and in
conformance with National Electrical Code, ANSI/NFPA
70-latest edition, and all local codes and ordinances.
Copies of the standards listed may be obtained from:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169
Power Supply Cord
NOTE: Your air conditioner’s device may differ from the one
shown.
This window air conditioner is equipped with a power supply cord
required by UL. This power supply cord contains state-of-the-art
electronics that sense leakage current. If the cord is crushed, the
electronics detect leakage current and power will be
disconnected in a fraction of a second.
To test your power supply cord:
1. Plug power supply cord into a grounded 3 prong outlet.
Power
Supply
Cord Electrical Requirements
■115-volt (103.5 min. - 126.5 max.)
■0-12 amps
■15-amp time-delay fuse or circuit breaker
■If there is a “Single Circuit Only” label on the
unit, use on a dedicated single-outlet circuit
only.
■If a dedicated single-outlet circuit is not
available, then it is the customer’s
responsibility to have a single-outlet circuit
installed by a qualified electrician.
■If there is no “Single Circuit Only” label on the
unit, the unit may be used on any branch
circuit of correct voltage and adequate current
protection rating.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
A. Test button
B. Reset button
POWER
TEST
RESET
A
B
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING

6
2. Press RESET (on some devices, a green light will turn on).
3. Press TEST (listen for click; Reset button will trip, and on
some devices, a green light will turn off).
4. Press and release RESET (listen for click; Reset button will
latch, and on some devices, a green light will turn on). The
power supply cord is ready for operation.
NOTES:
■The Reset button must be pushed in for proper operation.
■The power supply cord must be replaced if it fails to trip when
the test button is pressed or fails to reset.
■Do not use the power supply cord as an off/on switch. The
power supply cord is designed as a protective device.
■A damaged power supply cord must be replaced with a new
power supply cord obtained from the product manufacturer
and must not be repaired.
■The power supply cord contains no user serviceable parts.
Opening the tamper-resistant case voids all warranty and
performance claims.
INSTALLATION INSTRUCTIONS—6300 BTU, 8000 BTU
Unpack the Air Conditioner
Remove Packaging Materials
■Handle the air conditioner gently while unpacking the unit.
■Cut the 4 plastic bands that secure the carton.
■Remove the carton top and lift the air conditioner from the
base pad.
■Remove tape and glue residue from surfaces before turning
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
■Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
■Remove any packaging materials inserted into the side
louvers.
■Dispose of/recycle packaging materials.
Prepare Air Conditioner for Installation
Install Top Channel
1. Remove the plastic covering the adhesive on the top channel
seal and attach the seal to the top channel, lining up the holes
in the seal and the top channel.
2. Place the top channel on the top of the air conditioner, lining
up the holes in the top channel with the holes in the top of the
air conditioner.
3. Using four ³⁄₈" screws, attach the top channel to the air
conditioner.
NOTE: Your model may differ from the one shown.
Install Side Curtains
NOTE: Attach curtains to the air conditioner before placing the air
conditioner in window.
1. Place the tabbed side of the side curtain in the track on the
right-hand side of the air conditioner cabinet.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
A. ³⁄₈ " screws
B. Top channel
A. Tabbed side of side curtain
B. Curtain frame
A
B
A
B

7
2. Slide the side curtain down the track until the curtain is
aligned with the top and bottom of the air conditioner cabinet.
3. Slide the side curtain frame into the top channel on the top of
the air conditioner and the track on the bottom of the air
conditioner.
4. Repeat the previous steps for the left-hand side curtain and
frame.
Prepare Window for Installation
1. Measure the width of the window opening.
2. Mark the center line on the inside windowsill.
3. Attach the foam seal with adhesive strip to the bottom of the
upper window.
Prepare Window with Storm Window or Other
Obstruction
1. Follow the steps in “Prepare Window for Installation.”
2. If possible, remove the storm window frame or other
obstruction.
3. If storm window frame or other obstruction cannot be
removed, attach a piece of wood across windowsill with the
thickness necessary for proper pitch of the air conditioner to
the outside to drain condensation from the unit.
NOTE: Check that the drain holes or slots in the storm
window frame are not caulked or painted closed.
Accumulated rainwater or condensation must be allowed to
drain away.
Position Air Conditioner
NOTES:
■Handle the air conditioner gently.
■Be sure your air conditioner does not fall out of the opening
during installation or removal.
A. Width of window opening
B. Center line
B
A
A. Piece of wood
B. Windowsill
C. Indoors
D. Outdoors
E. Storm window frame or
other obstruction
1 ¹⁄₂ "
Min.
¹⁄₂ "
Min.
A
B
D
C
E
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.

8
■The place where the power cord exits the air conditioner
should be no more than 6 ft (183 cm) from a grounded outlet.
■Do not block the air intake or discharge louvers in the front
panel.
■Do not block the louvers on the outside of the air conditioner.
1. Using 2 or more people, gently place the air conditioner into
the window and center it according to the center line marked
earlier. Check that the bottom channel of the air conditioner is
against the windowsill.
2. Lower the window sash behind the top channel to hold the air
conditioner in place.
NOTE: Your model may differ from the one shown.
Attach Side Curtains to Window
1. Pull the right-hand curtain out until it fits into the window
channel.
2. Use a ¹⁄₈" drill bit to drill a starter hole through the top hole in
the side curtain and into the window sash.
3. Insert one of the ³⁄₄" screws through the top hole of the right-
hand curtain and into the window sash.
4. Use a ¹⁄₈" drill bit to drill a starter hole through either the
bottom or side holes in the right-hand curtain and into the
windowsill or frame.
5. Insert one of the ³⁄₄" screws through the hole drilled in Step 4.
Side Curtain Screws
6. Repeat steps 1 through 5 for attachment of the left-hand
curtain.
A. Air conditioner
B. Bottom channel
CWindowsill
D. Outside
A. Side curtain against window channel
B. Window sash behind top channel
C. Bottom channel in behind windowsill
B
A
CD
A
B
C
A. Optional screws
A

9
Complete Installation
1. Insert the foam seal without adhesive strip behind the top of
the lower window sash and against the glass of the upper
window.
2. Place the window lock bracket as shown. Use a ¹⁄₈" drill bit to
drill a starter hole through the hole in the window lock bracket
and into the upper window.
3. Attach the window lock bracket to the upper window with
one ³⁄₄" screw to secure the window in place. 4. Plug into a grounded 3 prong outlet.
5. Press RESET on the power supply cord. See “Electrical
Requirements.”
6. Remove the clear plastic film from the control panel and
plastic front.
INSTALLATION INSTRUCTIONS—10K BTU, 12K BTU
Unpack the Air Conditioner
Remove Packaging Materials
■Handle the air conditioner gently while unpacking the unit.
■Cut the 4 plastic bands that secure the carton.
■Remove the carton top and lift the air conditioner from the
base pad.
■Remove tape and glue residue from surfaces before turning
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
■Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
■Remove any packaging materials inserted into the side
louvers.
■Dispose of/recycle packaging materials.
A. Top of lower window sash
B. Foam seal
A. Window lock bracket
B. Upper window
A
B
B
A
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.

10
Prepare Air Conditioner for Installation
Install Side Curtains
NOTE: Attach curtains to the air conditioner before placing the air
conditioner in window.
1. Place the tabbed side of the side curtain in the track on the
right-hand side of the air conditioner cabinet.
2. Slide the side curtain down the track until the curtain is
aligned with the top and bottom of the air conditioner cabinet.
3. Slide the side curtain frame into the top channel on the top of
the air conditioner and the track on the bottom of the air
conditioner.
4. Repeat the previous steps for the left-hand side curtain and
frame.
Prepare Window for Installation
1. Measure the width of the window opening.
2. Mark the center line on the inside windowsill.
3. Attach the foam seal with adhesive strip to the bottom of the
upper window.
Position Air Conditioner
NOTES:
■Handle the air conditioner gently.
■Be sure your air conditioner does not fall out of the opening
during installation or removal.
■The place where the power cord exits the air conditioner
should be no more than 6 ft (183 cm) from a grounded outlet.
■Do not block the air intake or discharge louvers in the front
panel.
■Do not block the louvers on the outside of the air conditioner.
A. Tabbed side of side curtain
B. Curtain frame
A
B
A. Width of window opening
B. Center line
B
A
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.

11
1. Using 2 or more people, gently place the air conditioner into
the window and center it according to the center line marked
earlier. Check that the bottom channel of the air conditioner is
against the windowsill.
2. Lower the window sash behind the top channel to hold the air
conditioner in place.
NOTE: Your model may differ from the one shown.
Attach Side Curtains to Window
1. Pull the right-hand curtain out until it fits into the window
channel.
2. Use a ¹⁄₈" drill bit to drill a starter hole through the top hole in
the side curtain and into the window sash.
3. Insert one of the ³⁄₄" screws through the top hole of the right-
hand curtain and into the window sash.
Side Curtain Screws
4. Repeat steps 1 through 3 for attachment of the left-hand
curtain.
A. Air conditioner
B. Bottom channel
C. Windowsill
D. Outside
A. Side curtain against window channel
B. Window sash behind top channel
C. Bottom channel in behind windowsill
B
A
CD
A
B
C

12
Attach Side Curtains to Windowsill—Side Curtain
Bracket (on some models)
1. Slide the side bracket over the bottom of the right-hand
curtain frame.
2. Use ¹⁄₈" drill bit to drill a starter hole through the hole in the
side bracket and into the windowsill.
3. Using a ³⁄₄" screw, attach the side bracket to the windowsill.
4. Repeat for side bracket installation on the left-hand side of
the air conditioner.
Complete Installation
1. Insert the foam seal without adhesive strip behind the top of
the lower window sash and against the glass of the upper
window.
2. Use ¹⁄₈" drill bit to drill a starter hole through the hole in the
top channel and into the window sash.
3. Attach the top channel to the window sash with a ³⁄₄" screw to
secure the window.
4. Place the window lock bracket as shown. Use a ¹⁄₈" drill bit to
drill a starter hole through the hole in the window lock bracket
and into the upper window.
5. Attach the window lock bracket to the upper window with
one ³¹⁄₃₂" screw to secure the window in place.
6. Plug into a grounded 3 prong outlet.
7. Press RESET on the power supply cord. See “Electrical
Requirements.”
8. Remove the clear plastic film from the control panel and
plastic front.
A. Top of lower window sash
B. Foam seal
A
B
A. Window lock bracket
B. Upper window
B
A
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING

13
AIR CONDITIONER USE
Operating your air conditioner properly helps you to obtain the
best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
■If you turn off the air conditioner, wait at least 3 minutes
before turning it back on. This keeps the air conditioner from
blowing a fuse or tripping a circuit breaker.
■Do not try to operate your air conditioner in the Cool, Eco or
Overnight mode when outside temperature is below 65°F
(18°C). The inside evaporator coil will freeze up, and the air
conditioner will not operate properly.
NOTE: In the event of a power failure, your air conditioner will
operate at the previous settings when the power is restored.
Starting Your Air Conditioner
NOTE: When the air conditioner is in Standby mode, the red
Power LED will be lit.
1. Press POWER to turn on the air conditioner. The red Power
LED will change to blue.
NOTE: When the air conditioner is first plugged in, the display
will show 1AM for 30 seconds, until the clock is set to the
correct time or a new mode is selected. When the air
conditioner is turned on for the first time after it is plugged in,
the mode will be set to Cool and the fan speed will be set to
Auto.
The display will show the factory-set temperature of 72ºF
(22ºC) for 5 seconds and then will show the current room
temperature.
When the air conditioner is turned on at all other times, the
unit will run according to the previous settings. The display
will show the previous settings for 5 seconds, and then show
the current room temperature.
2. Select mode. See “Mode.”
3. Set temperature. See “Temperature.”
4. Select fan speed. See “Fan Speed.”
NOTES:
■Auto fan speed and Temperature cannot be selected in
Fan Only mode.
■In Eco and Cool modes, Auto fan speed is selected
automatically.
Mode
1. Press MODE until you see the indicator light glow for the
desired setting.
2. Choose Cool, Eco, Overnight, Fan Only or 6th SenseTM Mode.
NOTE: 6th Sense can be accessed only when you are using
the remote control.
■Cool—Cools the room. Automatically sets fan speed to
Auto. Press the up or down arrow button to adjust the
temperature.
■Eco—Saves energy. The compressor and fan runs until
the set temperature is reached, and then the compressor
turns off. The fan runs an additional minute before turning
off. Automatically sets the fan speed to Auto. Press the
up or down arrow button to adjust the temperature.
■Overnight (8 hours)—Automatically raises the set
temperature by 4ºF (2ºC) and sets the fan speed to Low.
Press the up or down arrow button to adjust the
temperature. The set temperature increases 2ºF (1ºC) per
hour during the first 2 hours, and remains at this
temperature setting for the next 6 hours.
When Overnight mode ends, the air conditioner will go
into Cool mode and the thermostat setting will return to
the original Overnight mode temperature setting.
■Fan Only—Only the fan runs. Press FAN SPEED to select
Low, Medium or High. The Bar LED shows 1 bar for Low,
2 bars for Medium and 3 bars for High fan speed. The
temperature display shows “1” for Low, “2” for Medium
and “3” for High fan speed. After 5 seconds, the display
shows the current room temperature.
NOTES:
■Auto fan speed and Temperature cannot be selected
in Fan Only mode.
■In Eco and Cool modes, Auto fan speed is selected
automatically.
■6th SenseTM System—See “Using the Remote Control.”
NOTE: After 5 seconds, display will show the current room
temperature.
Power Modes Fan Speed Timed
On Off
Set Clock
Cool
Eco
Overnight
Fan Only 6th
SENSE
ROOM: SET:
F
C
AM
HR
PM
MIN
AUTO
V
V
Power
Modes Cool
Eco
Overnight
Fan Only
NOTE: The LEDs on the control panel will power down
10 seconds after Overnight mode is set. To reactivate the
LEDs and illuminate the control panel, touch any button
on the control panel or the remote control.

14
Fan Speed
1. Press FAN SPEED until you see the Bar LED display for the
desired setting.
2. Choose High, Med, Low or Auto.
■Low—Low cooling—1 bar and “1” shows in the
temperature display
■Med—Normal cooling—2 bars and “2” shows in the
temperature display
■High—Maximum cooling—3 bars and “3” shows in the
temperature display
■Auto—Automatically controls the fan speed depending on
the current room temperature and temperature control
setting. “A” shows in the temperature display and 1, 2 or
3 bars display the current fan speed.
NOTES:
■Auto fan speed and Temperature cannot be selected
in Fan Only mode.
■In Eco and Cool modes, Auto fan speed is selected
automatically.
NOTE: After 5 seconds, the display will show the current room
temperature.
Temperature
■Press the up arrow button to raise the temperature. Each time
you press or hold the up arrow button, the temperature will go
up 1ºF (1ºC) until it reaches 86°F (30°C).
NOTE: After 5 seconds, the display will show the current
room temperature.
■Press the down arrow button to lower the temperature. Each
time you press or hold the down arrow button, the
temperature will go down 1ºF (1ºC) until it reaches 61°F
(16°C).
NOTE: After 5 seconds, the display will show the current
room temperature.
To change from Fahrenheit to Celsius
Press and hold the up and down arrow buttons to change from Fº
to Cº. Release the buttons after Cº turns on.
Set Clock
NOTES:
■The Clock must be set to the correct time for the Timed
Function to operate properly.
■The first time the air conditioner is plugged in, the Set Clock
button LED will flash for 30 seconds or until the clock is
programmed.
■To reset the clock, the air conditioner can be in Standby
mode, with the red LED glowing, or running, with the blue
LED glowing.
1. Press SET CLOCK.
2. Press the up or down arrow button to set AM or PM and the
current hour.
3. Press SET CLOCK.
4. Press the up or down arrow button to set the current minutes.
5. Press SET CLOCK again to save settings.
C
Hr
AM
Min
PM
AUTO
V
Fan Speed
6th
SENSE
ROOM: SET:
F
C
AUTO
V
V
AM
HR
PM
MIN
Set Clock

15
Timed On Off
The Timed On Off function allows the air conditioner to be set to
turn on or off any time during the day or night, or to turn on or off
at the same time each day.
NOTES:
■The clock must be set to the correct time for Timed Function
to operate properly.
■The Timed On Off function may be set with the air conditioner
in Standby mode, with the red LED on the Power button lit, or
running, with the blue LED on the Power button lit.
Timed Off
Set the air conditioner to turn off at a specific time.
1. Press TIMED OFF. The Timed Off button LED will flash. The
display shows the actual time that the air conditioner will turn
off.
2. Press the up or down arrow button to change the Hour (AM/
PM) setting to the desired time that the air conditioner will
turn off.
3. Press TIMED OFF again while the actual time that the unit will
turn off is shown on the display, or wait 5 seconds for the unit
to automatically save the settings. The Timed Off button LED
will remain on. The display will show the current room
temperature.
NOTE: When the air conditioner turns off, the red LED on the
Power button lights for Standby mode. The Timed Function LED
turns off.
4. To view the time remaining before the air conditioner turns off,
press TIMED OFF once. Pressing Timed Off again while the
time remaining is shown on the display will cancel the setting.
Timed On
Set the air conditioner to turn on (if the unit is off) or change the
settings (if the unit is running) at a specific time.
1. Press TIMED ON. The Timed On button LED will flash. The
display shows the actual time that the air conditioner will turn
on or change settings.
2. Press the up or down arrow button to change the Hour (AM/
PM) setting to the desired time that the air conditioner will
turn on or change settings.
3. Select the mode. See “Mode.”
4. Set the temperature. See “Temperature.”
5. Select the fan speed. See “Fan Speed.”
6. Press TIMED ON again while the actual time that the unit will
turn off is shown on the display, or wait 5 seconds for the unit
to automatically save the settings. The Timed On button LED
will remain on. If the unit is running, the display will show the
current room temperature. If the unit is in standby mode, the
display will be blank.
NOTE: When the programmed time is reached, the Timed On
function will turn on the air conditioner or change the settings,
depending on the setting. The Timed On button LED will turn off
and the unit will continue operate at the selected settings.
7. To view the time remaining before the air conditioner turns on,
press TIMED ON once. Pressing Timed On again while the
time remaining is shown on the display will cancel the setting.
Timed On and Timed Off
Set the air conditioner to turn on and off at a specific time each
day.
1. Set the desired time for the air conditioner to turn on. See
“Timed On.”
2. Set the desired time for the air conditioner to turn off. See
“Timed Off.”
NOTES:
■The Timed On LED and Timed Off LED will remain on.
■Each day, the air conditioner will turn on and turn off at the
set time unless the programs are canceled.
Cancel All Programming in Timed On Off function
1. If the air conditioner is set to Timed On, press TIMED ON
twice to cancel the program.
2. If the air conditioner is set to Timed Off, press TIMED OFF
twice to cancel the program.
3. If the air conditioner is set to Timed On and Timed Off, press
either TIMED ON or TIMED OFF twice to cancel the
programs.
Timed
On Off

16
Using the Remote Control
NOTE: Remote control may differ in appearance.
NOTE: One CR2025 battery (included) powers the remote
control. Replace the battery after 6 months of use, or when the
blue light flashes 5 times every 10 minutes.
To remove the battery, place the remote control face down. Using
your thumbnail, press and hold the tab to release the battery
door, and pull out battery door with your index finger.
To reinstall the battery, place the battery into the battery door as
shown in the following illustration, matching the positive (+) side
of the battery with the positive (+) side of the battery door. Slide
the battery door into the remote control.
Storing the Remote Control
Store the remote control by placing the back side, containing a
magnet, against the side of the air conditioner cabinet in the
locations shown in the following illustration.
NOTE: The dotted lines do not appear on the unit cabinet. They
show the locations of the metal plates in the illustration only.
Power
1. Press POWER to turn on air conditioner.
2. Press POWER again to turn off the air conditioner.
Mode
Press MODE to choose Cool, Eco, Overnight or Fan.
6th Sense™ System Control
The air conditioner automatically selects Cool mode. The
temperature set point can be adjusted up to 86ºF (30ºC) or down
to 61ºF (16ºC). The fan speed can be set to Low, Medium, High
or Auto.
1. Press 6th Sense. The 6th Sense icon on the air conditioner
control panel will turn on.
2. Press the up or down arrow button on the remote control to
set the temperature.
3. Press FAN SPEED on the remote control to select the fan
speed.
A. Tab
Mode
Power
Fan Speed
6th
SENSE
V
V
®
A
Power
Mode
6th
SENSE

17
NOTES:
■When 6th Sense™System Control is selected, the unit will
measure the current room temperature sent by the remote
control. If the unit does not receive a signal from the remote
control, the current room temperature will be measured by
the unit.
■Signals between the unit and the remote control can be
checked by raising and lowering the thermostat temperature.
■To turn off 6th SenseTM System Control, press 6th Sense on the
remote control. The 6th Sense icon on the air conditioner
control panel will turn off. The unit will return to the previous
settings for cool, fan speed and temperature.
Fan Speed
1. Press FAN SPEED until you see the Bar LED on the air
conditioner control panel display for the desired setting.
2. Choose Low, Medium, High or Auto.
NOTES:
■Auto fan speed and Temperature cannot be selected
in Fan Only mode.
■In Eco and Cool modes, Auto fan speed is selected
automatically.
NOTE: After 5 seconds, the display on the air conditioner control
panel will show the current room temperature.
Temperature
■Press the up arrow button to raise the temperature. Each time
you press or hold the up arrow button, the temperature will go
up 1ºF (1ºC) until it reaches 86°F (30°C). The up LED on the
air conditioner control panel will light
■Press the down arrow button to lower the temperature. Each
time you press or hold the down arrow button, the
temperature will go down 1ºF (1ºC) until it reaches 61°F
(16°C). The down LED on the air conditioner control panel will
light.
Changing Air Direction
Use tab to direct the air right or left.
AIR CONDITIONER CARE
Your new air conditioner is designed to give you many years of dependable service. This section tells you how to clean and care for your
air conditioner properly. Call your local authorized dealer for an annual checkup. Remember … the cost of this service call is your
responsibility.
Cleaning the Air Filter
The air filter is removable for easy cleaning. A clean filter helps
remove dust, lint, and other particles from the air and is important
for best cooling and operating efficiency. Check the filter every
2 weeks to see whether it needs cleaning.
NOTE: Do not operate the air conditioner without the filter in
place.
1. Turn off the air conditioner.
2. Remove the air filter by pressing down on the tabs on the air
intake grille and pulling the grille away from the air
conditioner.
Fan Speed
A. Tab
V
V
A

18
3. Remove the filter from the grille by lifting to release the
slotted tabs on the top and bottom of the grille. 4. Use a vacuum cleaner to clean air filter. If the air filter is very dirty, wash it in warm water with a mild detergent.
NOTE: Do not wash the air filter in the dishwasher or use any
chemical cleaners. Air dry the air filter completely before
replacing to ensure maximum efficiency.
5. Reattach the air filter to the air intake grille.
6. Insert the air intake grille into the slots on the air conditioner
and snap into place.
Cleaning the Front Panel
1. Turn off the air conditioner.
2. Clean the front panel with a soft, damp cloth.
3. Air dry the front panel completely.
Repairing Paint Damage
Check once or twice a year for paint damage. This is very
important, especially in areas near oceans or where rust is a
problem. If needed, touch up with a good grade enamel paint.
Annual Maintenance
Your air conditioner needs annual maintenance to help ensure
steady, top performance throughout the year. Call your local
authorized dealer to schedule an annual checkup. The expense
of an annual inspection is your responsibility.
TROUBLESHOOTING
Before calling for service, try the suggestions below to see whether you can solve your problem without outside help.
Air conditioner will not operate
■The power supply cord is unplugged. Plug into a grounded
3 prong outlet. See “Electrical Requirements.”
■The power supply cord has tripped (Reset button has
popped out). Press and release RESET (listen for click; Reset
button will latch and on some devices, a green light will turn
on) to resume operation.
■A household fuse has blown, or circuit breaker has
tripped. Replace the fuse or reset the circuit breaker. If the
problem continues, call an electrician. See “Electrical
Requirements.”
■The Power button has not been pressed. Press POWER.
■The local power has failed. Wait for power to be restored.
Air conditioner blows fuses or trips circuit breakers
■Too many appliances are being used on the same circuit.
Unplug or relocate appliances that share the same circuit.
■Time-delay fuse or circuit breaker of the wrong capacity
is being used. Replace with a time-delay fuse or circuit
breaker of the correct capacity. See “Electrical
Requirements.”
■An extension cord is being used. Do not use an extension
cord with this or any other appliance.
■You are trying to restart the air conditioner too soon after
turning off the air conditioner. Wait at least 3 minutes after
turning off the air conditioner before trying to restart the air
conditioner.
A. Slotted tab
B. Lift slotted tab to remove.
C. Air intake grille
D. Air filter
C
B
D
A
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING

19
Air conditioner power supply cord trips (Reset button
pops out)
■Disturbances in your electrical current can trip (Reset
button will pop out) the power supply cord. Press and
release RESET (listen for click; Reset button will latch and on
some devices, a green light will turn on) to resume operation.
■Electrical overloading, overheating, cord pinching or
aging can trip (Reset button will pop out) the power
supply cord. After correcting the problem, press and release
RESET (listen for click; Reset button will latch and on some
devices, a green light will turn on) to resume operation.
NOTE: A damaged power supply cord must be replaced with a
new power supply cord obtained from the product manufacturer
and must not be repaired.
Air conditioner seems to run too much
■The current air conditioner replaced an older model. The
use of more efficient components may cause the air
conditioner to run longer than an older model, but the total
energy consumption will be less. Newer air conditioners do
not emit the “blast” of cold air you may be accustomed to
from older air conditioners, but this is not an indication of
lesser cooling capacity or efficiency. Refer to the efficiency
rating (EER) and capacity rating (in Btu/h) marked on the air
conditioner.
■The air conditioner is in a heavily occupied room, or heat-
producing appliances are in use in the room. Use exhaust
vent fans while cooking or bathing and try not to use heat-
producing appliances during the hottest part of the day. A
higher capacity air conditioner may be required, depending
on the size of the room being cooled.
Air conditioner cycles on and off too much or does not
cool room in cooling mode
■The air conditioner is not properly sized for your room.
Check the cooling capabilities of your window air conditioner.
Window air conditioners are not designed to cool multiple
rooms.
■The filter is dirty or obstructed by debris. Clean the filter.
■The inside evaporator and outside condenser coils are
dirty or obstructed by debris. See “Annual Maintenance.”
■There is excessive heat or moisture (open container
cooking, showers, etc.) in the room. Use a fan to exhaust
heat or moisture from the room. Try not to use heat-
producing appliances during the hottest part of the day.
■The louvers are blocked. Install the air conditioner in a
location where the louvers are free from curtains, blinds,
furniture, etc.
■The outside temperature is below 65°F (18°C). Do not try to
operate your air conditioner in the cooling mode when the
outside temperature is below 65°F (18°C).
■The temperature of the room you are trying to cool is
extremely hot. Allow extra time for the air conditioner to cool
off a very hot room.
■Windows or doors to the outside are open. Close all
windows and doors.
■ The temperature setting is not set to a cool enough
setting.
Adjust the temperature to a cooler setting by pressing
the minus button to reduce the temperature. Set the Fan
Speed control to the highest setting.
Water drips from cabinet into your house
■The air conditioner is not properly leveled. The air
conditioner should slope slightly downward toward the
outside. Level the air conditioner to provide a downward
slope toward the outside to ensure proper drainage. See the
Installation Instructions.
NOTE: Do not drill a hole into the bottom of the metal base
and condensate pan.
Normal Sounds
When your air conditioner is operating normally, you may hear
sounds such as:
■Droplets of water hitting the condenser, causing a pinging or
clicking sound. The water droplets help cool the condenser.
■Air movement from the fan.
■Clicks from the thermostat cycle.
■Vibrations or noise due to poor wall or window construction.
■A high-pitched hum or pulsating noise caused by the modern
high-efficiency compressor cycling on and off.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
use only factory-specified replacement parts. Factory-specified
replacement parts will fit right and work right because they are
made with the same precision used to build every new appliance.
To locate factory-specified replacement parts in your area, call
your nearest designated service center.

20
In the U.S.A.
Call the Whirlpool Customer eXperience Center toll free:
1-800-253-1301. In Puerto Rico, call 1-787-999-7400.
Our consultants provide assistance with:
■Features and specifications on our full line of appliances.
■Installation information.
■Use and maintenance procedures.
■Accessory and repair parts sales.
■Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
■Referrals to local dealers, repair parts distributors and service
companies. Whirlpool designated service technicians are
trained to fulfill the product warranty and provide after-
warranty service, anywhere in the United States.
To locate the Whirlpool designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
For further assistance
If you need further assistance, you can write to Whirlpool
Corporation with any questions or concerns at:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
In Canada
Call the Whirlpool Canada LP Customer eXperience Centre toll
free: 1-800-807-6777.
Our consultants provide assistance with:
■Features and specifications on our full line of appliances.
■Use and maintenance procedures.
■Accessory and repair parts sales.
■Referrals to local dealers, repair parts distributors, and
service companies. Whirlpool Canada LP designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to Whirlpool
Canada LP with any questions or concerns at:
Customer eXperience Centre
Whirlpool Canada LP
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
WHIRLPOOL WINDOW AIR CONDITIONER LIMITED WARRANTY
ONE YEAR LIMITED WARRANTY
For one year from the original date of purchase, when this window air conditioner is installed, operated and maintained according to the
instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter "Whirlpool") will, at its
sole discretion, either pay for factory specified parts and repair labor to correct defects in materials or workmanship or replace the
product with a comparable product that is new or refurbished. If replaced, the unit will be covered by the remaining one-year limited
warranty of the original unit. See service instructions below.
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THE LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AT
OUR DISCRETION AS PROVIDED HEREIN. Service must be provided by a Whirlpool designated service company. This limited
warranty is valid in the United States, Puerto Rico or Canada and applies only when the window air conditioner is used in the country in
which it was purchased. This limited warranty is effective from the date of the original consumer purchase. Proof of original purchase
date is required to obtain service or replacement under this limited warranty.
ITEMS EXCLUDED FROM WARRANTY
This limited warranty does not cover:
1. Service calls to correct the installation of your window air conditioner, to instruct you how to use your product, to replace or repair
house fuses, reset circuit breakers or to correct house wiring or plumbing.
2. Service calls to repair or replace air filters. Consumable parts are excluded from warranty coverage.
3. Repairs or replacement when your window air conditioner is used for other than normal, single-family household use or when it is
used in a manner contrary to published user or operator instructions and/or installation instructions.