Whirlpool 3LG5706XP User manual

r
T---
Rll
AUTOMATIC
DRYERS
Gas Model
3LG5706XP
i-93
Nave Ovens. Trash Compactors, Room Air Condltloners, Oehumldlhers, Automatic Washers, Clothes Dryers. Freezers. Refngerator-Freezf

Parts and features
CYCLE CONTROL KNOB
\ T\EMPERATURE SELECTOR
RMATION CENTER
START BUTTON
LOADING DOOR
MODEL
AND SERIAL
NUMBER PLATE
Remove the Con-
sumer Buy Guide la-
bel before using
your dryer. It will be
easier to remove.
Wipe out the
dryer drum with a
damp cloth to re-
move dust from stor-
ing or shipping.
Copy your Model and Serial Numbers here
When you need service or call with a
question, have this InformatIon ready
Complete Model Number
1. Complete Model and Serial Numbers
[from the plate located as shown)
2. Purchase date from sales slop
Complete Serial Number
Copy this Information In these spaces
Keep this book, your warranty, sales slop Purchase Dale
and “Dryer Guide” In the Laundry Intor-
mation Center on the back of the dryer
Service Company and
console
Telephone Number
There IS no warranty registration to return. Proof-of-purchase IS all
that IS required for in-warranty service.
Contents
Page
PARTS AND FEATURES Page
2 LINTSCREEN.. 8
YOUR RESPONSIBILITIES. 3 LINT REMOVAL 8
SAFETY FIRST. 3 CARING FOR YOUR DRYER. 9
SELECTING A CYCLE AND Cleaning Dryer Interior.. 9
STARTING YOUR DRYER. 4 Vacation Care, 9
OPERATING INSTRUCTIONS 6 IF YOU NEED SERVICE OR
Dryer Cycles and Settings 6 ASSISTANCE. 10
Cool Down Times 6 I. Before Calling for
DRYING TIPS. 7 Assistance 10
FLUFFAIR Setting 7 2. IfYou Need Assistance. 11
TUMBLE PRESS” Setting 7 3. IfYouNeedService .,,... 11
Mixed Loads 7 4. If You Have a Problem 11
Drying Times 7
z Cl985 Whirlpool Corporation

Your
Responsibilities
Read this “Use and Care Guide”
and your “Dryer Guide” carefully for
if?JpOrtant use and safety information.
You are personally responsible for
making sure that your dryer...
l is installed by a qualified installer.
l is properly maintained.
l is installed in an area protected
from the weather.
l is properly installed and leveled in
a well ventilated room’ on a floor
l is located in an area where the tem-
perature is above 45°F (7.2”C).
l is connected to the right kind of out-
let, electric supply and grounding.’
l is properly connected to fuel and
exhaust systems*
l is used only for jobs normally ex-
pected of home clothes dryers.
l is not run where there may be explo-
sive fumes.
l is not used by children or anyone
unable to operate it properly.
‘See the”Installation Instructions” for
that can support the weight.
l FOR YOUR SAFETY l
IF YOU SMELLGAS:
1. OPEN WINDOWS.
2. DON’T TOUCH ELECTRI-
CAL SWITCHES.
3. EXTINGUISH ANY OPEN
FLAME.
4. IMMEDIATELY CALL
YOUR GAS SUPPLIER.
l FOR YOUR SAFETY l
DO NOT STOREOR USE
GASOLINE OR OTHER
FLAMMABLE VAPORS AND
LIQUIDS IN THEVICINITY
OF THIS OR ANY OTHER
APPLIANCE.
3

TYPE OF LOAD
COTTONS - LINENS
EXIRA HEAVY - Bedspreads,
mattress pads, quilts.
HEAVYWEIGHT FABRICS - Towels,
jeans, corduroys, work clothes
MEDIUMWEIGHT COTTONS -
Sheets, pillowcases, cotton
underwear, diapers
LIGHTWEIGHT COTTONS -i&t&
organdies, lingerie
PERMANENT PRESS, SYNTHETICS
AND BLENDS
HEAVYWEIGHT FABRICS -Work clothes,
jackets, raincoats
MEDIUMWEIGHT FABRICS - Shirts, play
clothes, sheets, slacks
LIGHTWEIGHT FABRICS - Lingerie,
blouses, dresses
SUGGESTED SUGGESTED
CYCLE TEMPERATURE
EX HEAVY
HEAVY
MEDIUM
PERMIT
PRESS
HEAVY
HIGH
LIGHT
PERM’T PRESS
PERM’T
40-50 MINS. PRESS
HEAVY
30-40 MINS. HIGH
20-30 MINS
KNITS PERM’T PRESS
HEAVYWEIGHT - Cottons, rayons. PERMIT PRESS
blends,T-shirts, slacksshirts 40-50 MINS. HEAVY HIGH
LIGHTWEIGHT - Synthetics [polyester, KNITS GENTLE
acrylic, etc.) and blends, lingerie, LOW
blouses, dresses 30-40 MINS.
LIGHTWEIGHT AND DELICATE FABRICS
Sheer Curtains (2 or 3 panels) PERM’T PRESS KNITS GENTLE
20-30 MINS.
Gauze, lace, etc. 15-20 MINS. LOW
RUBBER, PLASTIC, HEAT-SENSITIVE
FABRICS
FOAM RUBBER - Pillows, bras,
stuffed toys
PLASTIC - Shower curtains,
tablecloths
RUBBER-BACKED RUGS
OLEFIN, POLYPROPYLENE, SHEER NYLON
PERMIT PRESS
20-30 MINS. FLUFF
AIR
20-30 MINS.
40-50 MINS.
15-20 MINS.

Select a
1. CYCLE Set TEMPERATURE
2. SELECTOR
Turn the Control Knob either way to
point to the cycle and sefllng you
want See page 6 for InformatIon on
the cycles
Push the
3. START Hutton
The dryer WIII start tumbling when
you push the START Button
Turn the Temperature Selector to the
needed drying temperature
To stop and restart
the dryer
To stop the dryer, open the door (or
turn the Control Knob to OFF]
To restart the dryer. close the door,
Select cycle, If necessary. and push
START
The Cycle Control Knob should point to OFF when the dryer is not in use.
5

Operating instructions
Dryer cycles and settings Cool down times
In all cycles, the heat shuts off
before the dryer stopstumbling.This
cool down time helps.
l keep wrinkles from setting in.
l make handling the hot load items
easier
The PERMANENT PRESS Cycle helps
provide the special care that perma-
nent press and synthetic fabrics
need...a period of heated drying
followed by a 10 minute cool down.
The chart on page 4 suggests time
and temperature settings for different
kinds of loads.
COOL C-OWN COOL DOWN
The EX HEAVY, HEAVY, MEDIUM and
LIGHT cycles describe the loads
they are deslgned to dry.The chart
on page 4 tells what ISmeant by
EX HEAVY, HEAVY, MEDIUM and LIGHT
loads
At each settlng,the dryer will run
about long enough to dry the load
described by the setting Example
The HEAVY Cycle ISdesigned to be
long enough to dry a load of heavy
fabrics [towels, jeans, corduroys, etc.)
when the Temperature Selector ISset
on PERM’T PRESS/HEAVY HIGH.
I
+ MORETIME LESSTIME + I
If the load IS not as dry as You want,
set the dial more to the letl the next
time you dry that kind of load
If the load is dryer than You want,
set the dial more to the right the next
time you dry that kind of load
The PERMANENT PRESS Cycle has
10 minutes of cooldown time atthe
end of the cycle.
All other cycles have 5 minutes of
cool down time
6

Drying tips
FLUFF AIR
The dryer does not heat when the
Temperature Selector ISset on FLUFF
AIR. This setting can be used to fluff
bedding, plastic tablecloths, foam
rubber pillows. stuffed toys, sneakers,
etc.
TUMBLE PRESS” Setting
The TUMBLE PRESSsetting removes
wrinkles from dry clothing such as
items that may have been packed
in a suitcase, closet, or items not
removed from the dryer.
1. Turn the Temperature Selector to
FLUFFAIR.
2. Turn the Control Knob to the num-
ber of minutes you want in the
TIMED DRYING Cycle.
3. Push the STARTButton.
1. Set Temperature Selector to PERM’T
PRESS/HEAVY HIGH.
2. Set Control Knob to TUMBLE PRESS
3. Push START Button.
The load will tumble in heated air
for 5 minutes. The heat shuts off and
the dryer continues to tumble the
load for 10 more minutes.
For best results, TUMBLE PRESSonly
a few items at a time. Put them on
hangers or fold them as soon as the
dryer stops.
Mixed loads
When drying a load with different
klncts and weights of tabrtcs, use the
cycle suggested for the lightest
fabrics. When the dryer stops, remove
dry items and reset the control.
Drying times
Dryrng times WIII vary depending on
l amount of moisture In the clothes.
l type and weight of the fabrrc
l size of the load.
l room temperature around the
dryer.
l temperature of the wash rinse
water.
l amount of lint in the lint screen
l dryer temperature selection.
See page 6 in your”Dryer Guide”
for more information
7

Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen
straight out. ROLL the lint off the screen
with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into
place.
Lint removal
Lint can gather inside the dryer and create a fire hazard. This lint
should be removed every 2 to 3 years, or more often, depending on
dryer usage.
GAS DRYERS
Cleaning should be done only by a qualified person.
WARNING:
l Avoid electrical shock
hazard - unplug power
supply cord or turn off
electrical power.
l Avoid injury or damage-do not
put hands inside cabinet.
l Make sure dryer is cool.
1. Remove lower access panel,
2. Avoid damaging wires,
thermostats, funnel or igniter.
3. Remove lint from shaded area -
see art-with a soft brush or
vacuum cleaner.
4. Replace panel; reconnect and
re-level dryer.

Remove loose and sharp objects
from pockets and cuffs before drying -
pins, buckles, etc. Close metal
zippers.
Some pretreatment products cal
damage dials, consoles and finish
Do not use these products on or
near your dryer.
Wipe off all spills with a damp, soft
cloth. Spills allowed to remain may
dull or damage the finish.
Never leave wet or damp laundry
in your dryer.
Sharp or heavy objects should
never be put on or in the dryer.
Check pockets for bolts, nuts, etc.
Cleaning dryer interior
0
Before cleaning interior,
unplug power supply cord
or turn off electrical
power to avoid electrical
shock hazard.
Garments which contain unstable dyes,
such as denim blue jeans or bright-
ly colored cotton items, may discolor
the dryer interior. If the interior
is discolored, clean with one of the
following methods to avoid staining
later load items.
Powdered laundry detergent and
very warm water
Make a paste with detergent and
very warm water. Apply paste to
a soft cloth and scrub area until all
excess dye is removed. Wipe thor-
oughly with a damp cloth. Tumble
a load of rags. -OR-
Liquid spray household cleaner
Spray on stained area. Rub with a
cloth until all excess dye is re-
moved. Tumble a load of rags.
Vacation care
l Unplug power cord or turn oft elec-
trical power.
9 For gas dryers, close gas valve.
l Clean lint screen. 9

If you need service or assistance, we suggest
you follow these steps:
Before calling for
assistance...
Performance problems often result
from little things you can find and fix
yourself without tools of any kind.
If your dryer does not run:
l If the power supply cord plugged
into a live circuit with the proper volt-
age?
l Is the door closed tightly?
l Did you push the STARTButton?
If your dryer does not heat:
l The AIR setting is without heat.
l The last minutes of heat settings are
without heat.
i-J&!!&
l Is the gas turned on? If not, turn the
Control Knob to OFF. Turn on gas.
Wait 5 minutes. Reset controls and
start.
l An electric dryer uses a circuit
breaker or 2 fuses. If one fuse is
blown, the dryer may run, but not
heat.
If drying time seems long:
l Is the lint screen clean?
l See page 7 of this book and page 6
of your “Dryer Guide:’
l Have you checked your home’s
main fuses or circuit breaker box?
10