Whirlpool AWD60A User manual

Remove the transport packaging ( fig. 1) and remove the dryer rack from the top packaging ( fig. 2) .
fig. 1 fig. 2 fig. 3 fig. 4
Remove the tape on the front (fig. 3 and fig. 4), the Wall Mounting kit attached to the Drum with
tape on the inside and the Panel film, before starting the dryer.

The dryer can be mounted on a wall in the inverted position only by following these
instructions.
Invert
Warning: Ensure that the screw and nut of the Wall Hanging Brackets are tightened
during installation, if required. Regularly check all the screws and nuts and
tighten, if required. Do not overtighten.