WHITECROFT LIGHTING Selise Maxi User manual

GENERAL INFORMATION
1) A qualified electrician, in accordance with IEE wiring regulations should carry out connection
to mains wiring.
2) Electrical Class II luminaire
3) Ensure that the rated voltage and frequency requirements are compatible with the available
mains supply.
4) Cleaning of reflectors and lenses should be carried out using clean, soft and lint free cloths
and anti-static cleaning fluid
5) Do not carry out high voltage insulation test, i.e. 500/1000v this may damage internal
components.
6) When installing on floodlight arms, Selise Maxi should be ‘underslung’ as shown below.
.
TECHNICAL SUPPORT
Telephone: [phone]
E-mail: [e-mail]
http://www.whitecroftlighting.com/
Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Telephone [phone] Facsimile: [phone]
Registered No. 3848973 England Registered Office: As above
Feb 2021 - Rev D
Selise Maxi
PK/LEAF/SELISE-MAXI
Page - 4 Page - 1
Version. Dia. H W W
1
KG
101/135/202W 462 477 100 160 13.8
270W 512 524 100 160 14.0
419W 512 524 184 184 17.2
WINDAGE M
2
: 0.12
SIDE VIEW
FRONT VIEW- TWIN

SPECIFICATION
Finish Graphite grey and silver
Materials Tempered glass / Mild Steel / Aluminium Body
IK Rating 08
Supply 240V AC, 50Hz
Power (High Frequency) 9732 Lumens (101W)
12976 Lumens (135W)
19465 Lumens (202W)
25954 Lumens (270W)
36009 Lumens (419W)
Operating temp -40 to 40C (+35C for 419W version)
Connection 1.5mm2 input
Ingress protection IP66
Swimming Pool versions
Swimming Pool versions with enhanced specification up to 270W maximum. Where provided, secondary
suspensions must be fitted. Suitable fixings to the building fabric must be used (supplied by others)
Page - 2 Page - 3
FITTING INSTALLATION