Whitesand WSM-100 User manual
Single/Dual Wireless Microphone System
USER'S MANUAL
WSM-100/200
Whitesand
Overview........................................................3
Box Contents............................................................................................3.1
System Features......................................................................................3.2
Wireless Receiver....................................................................................4.1
Handheld Transmitter...............................................................................4.2
System Setup................................................5
Installation...............................................................................................5.1
Functions.................................................................................................5.2
Troubleshooting......................................................................................6.1
Specifications...............................................6
Warranty and Technical Information...........7
2
TABLE OF CONTENT
Whitesand is an audio solution provider dedicated to developing lifestyle
affordable audio products for our users, from entertainment events to the home
audio studio. Thank you for purchasing the Whitesand WSM-100/200 wireless
microphone system. This informative booklet provides a description of features
and a step-by-step guide to operate this unit. Please read this manual carefully
to answer any questions about the operation. And please keep this manual
available for future reference.
3
OVERVIEW
Box Contents
System Features
● With professional cardioid dynamic capsule, the system can eliminate
noise floor and howling and reproduce excellent, clear, pure and high-
fidelity sound.
● 30 adjustable frequency groups with long transmission range (60 m)
in open space ensures up to 15 sets used simultaneously without
worrying about interference.
● Operation is a piece of cake. Just turn on the receiver and mics,
they will pair up automatically. AA batteries are required and
included for each mic.
● Free anti-rolling rings for protecting your mic and windscreens for
filter the unwanted pops sound.
● Ideal for Karaoke, Home KTV, Big party, DJ, Wedding, Class use.
● Note: It is not compatible with laptop, iPad, cellphone and AV receiver.
WSM-100
1 x Rechargeable receiver
1 x Handheld transmitter
2 x AA battery
1 x Micro USB charging cable
1 x User’s manual
1 x Rechargeable receiver
2 x Handheld transmitter
4 x AA battery
1 x Micro USB charging cable
1 x User’s manual
WSM-200
4
Rechargeable Receiver
Handheld Transmitter
① Battery indicator
② Frequency number
③ Channel number
④ Power Button
Short press to turn on the mic,
and long press to turn it off.
⑤ SET Button
Short press to change the frequency.
⑥ Battery Compartment
ANT USB
①
①
③②
⑤
⑥
④
②
③
④
⑤
⑥ ⑦
CHA MHz
POWER SET
① 1/4” TS output connector
② Power switch
③ RF A indicator
It lights green when the receiver is paired with
the transmitter. The light turns off when the
receiver and the transmitter are not paired up.
④ RF B indicator
It lights red when the receiver is paired with the
transmitter. The light turns off when the receiver
and the transmitter do not paired up.
⑤ Power indicator
It lights red when the receiver is charging, and
turns green when the receiver is fully charged.
It lights orange when the battery is insufficient.
⑥ Antenna
⑦ Micro USB charging port
Power
RFB
RFA
5
SYSTEM SETUP
Installation
Functions
1.Take out the wireless receiver from the package. Erect the ante-
nna and connect the power cable to a wall outlet.
2.Use the included 6.35mm audio cable to connect the receiver’s
mixed output and other audio devices (speaker, amplifier, mixer, etc.).
3.Turn on the receiver and the transmitter and they will automatic-
ally pair up.
4.If you want to switch frequencies, please press the SET button
on the microphone to adjust and it will automatically pair up with
the receiver as well.
1.Channel switch function
① Long press the power button to turn it off.
② Long press the power button for 8 seconds
to change channel.
③ Keep long press until CHA changes to CHB
(or CHB changes to CHA).
2.Channel lock function
① Long press the power button to turn it off.
② Long press the power button and SET button
together for 3s to lock your channel.
③ Tap the SET button to change the frequency
and confirm your setting.
CHA MHz
8s
3s
POWER SET
CHB MHz
POWER SET
CHB MHz
POWER SET
CHB MHz
POWER SET
CHB MHz
CHA MHz
POWER SET
6
SPECIFICATIONS
Troubleshooting
1.No sound
2. Cutoffs & interference
Tap the SET button to change the frequency and find the best
one for transmission. If this solution doesn’t work, please contact
us for change the defective parts.
System Status
The RF signal
indicator does not
light up
The RF signal
indicator lights up
Transmitters and the
receiver was not paired up
The amplifier/speaker is
not connected or adjusted
properly.
① Connect the receiver to the amplifier
together with the speaker or to the
speaker only.
② Turn on the amplifier and speaker
and adjust the volume to a
proper level.
Reasons Solution
Frequency band
Frequency range
SNR
Distortion
Frequency response
Frequency stability
Operating temperature
Battery capacity of the receiver
UHF
530 - 580 MHz
>6dB
≤0.5%
50Hz - 15kHz
±0.0005MHz
﹣10℃ to﹢60℃
1000mAh
① Check if microphone is turned on
and in sufficient battery.
② Check if receiving antennas are
erected correctly.
③ Ensure there are no obstacles
between microphones and the receiver,
and their distance is within the max
range.
7
TECHNICAL SUPPORT
& WARRANTY INFORMATION
Whitesand warrants to the original consumer purchaser that the above unit is free
from any defects in material or craftsmanship for 12 months from the date of the
original purchase. If any such defect is discovered within the warranty period,
Whitesand will repair or replace the unit free of charge, subject to verification of
the defect or malfunction upon return to Whitesand.
To the extent permitted by law, any applicable implied warranties, including
warranties of merchantability and fitness, are hereby limited to 12 months from
the date of purchase. Consequential or incidental damages resulting from a
breach of any applicable express or implied warranties are hereby excluded. This
warranty is in lieu of all other agreements and warranties, general or special,
express or implied, and no representative or person, including a Whitesand
dealer, agent, or employee, is authorized to assume for us any other liability in
connection with the sale or use of this Whitesand product.
THIS WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS:
1-This system must be purchased from an authorized Whitesand dealer.
2-Items not covered: physical damage resulting from improper handling of the unit
in transit from the factory by the shipper; defects caused by normal wear of the
product (expendable parts are typically connectors, cables, potentiometers, switch-
es, and similar components); damage or defects caused by abuse, neglect,
accident, failure to connect or operate the unit in any way that does not comply with
applicable technical or safety regulations, or improper, repair, excessive heat or
humidity, alteration or unreasonable use of the unit, causing cracks, broken
cases/housing or parts; damage caused by leaking batteries; finish or appearance
items.
Whereas some states do not allow limitations on how long implied warranties last
or do not allow the exclusion of incidental or consequential damages, the above
limitations and exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights which may vary from state to
state
HOW TO OBTAIN SERVICE:
about your products, and a Whitesand representative will contact you to provide
assistance. If you purchased this system through Amazon, you could also contact
customer service through the Amazon message center.
This manual suits for next models
1
Table of contents
