Whittier Wood Furniture Ellison 2170AST User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 06/18
Model #
2170AST
Ellison Beveled Mirror
AST = Astoria Sky finish
Assembly Instructions
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Handle the mirror with care. Glass is fragile.
Before you begin your project, completely read the Assembly
Instructions.
WARNING
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CUSTOMER SERVICE
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
Fax: [phone]• Email: [e-mail]
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.

2170AST Ellison Beveled Mirror
Parts List
2170AST —Page 2 —06/18
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
A
Mirror Assembly
1
B
Mirror Frame
1
C
Mirror (attached)
1
D
Mirror Retainer (attached)
4
E
Mirror Support
2
F
#6 x 3/4" Brass Flat Head Screw (inserted)
4
G
#6 x 5/8" Philtruss Screw (inserted)
12
H
#8 x 1-3/4" Pan Head Screw
2
I
#7 x 1-1/2" Black Pan Head Screw
4
J
M4 x 41mm Machine Screw
4
K
Velvet Pad 50 x 50mm
3
L
Mirror Wall Bracket
2
(1 attached)

2170AST Ellison Beveled Mirror
Assembly Instructions
2170AST —Page 3 —06/18
Tools Required: Phillips Screwdriver, Tape Measure, Pencil
You have the option of attaching your Mirror to the wall or to selected Ellison Dressers. To
attach your Mirror to the wall, follow steps 1 –4. To attach the Mirror horizontally to a
compatible Ellison Dresser, follow steps 5 –9.
1. Decide if you want your Mirror to hang either vertically or horizontally. If you want it to hang
vertically, remove the Mirror Wall Bracket (L) and line it up to the predrilled holes on the short
side of the Mirror Frame (B) as in Figure 1. Attach with four #6 x 3/4" Flat Head Screws (F).
2. Determine where you want the bottom of your mirror to end and draw a faint pencil line on the
wall. For a vertical placement, use a tape measure and measure up 34-5/8" from that mark.
Draw a faint line. For a horizontal placement, measure up 31-1/2". Draw a faint line. The top line
is where you attach the Mirror Wall Bracket (L). If you like, you can erase the faint bottom pencil
mark. See Figures 2 and 2a.
Horizontal Wall Mount
Wall
Vertical Wall Mount
Fig. 2
Fig. 2a
Wall
34-5/8"
31-1/2"
Fig. 1
B
M
F
x 4

2170AST Ellison Beveled Mirror
Assembly Instructions
2170AST —Page 4 —06/18
3. Locate two studs in the wall behind the space where you want to hang your Mirror. Affix the
Mirror Wall Bracket (L) into the studs with two #8 x 1-3/4" Pan Head Screws (H). If you cannot
locate two studs, purchase the proper wall attachment hardware for your type of wall and secure
the bracket. See Figure 3.
4. NOTE: The Mirror Wall Bracket (L) angles out at the top. When you hang your Mirror, the
bracket that is attached to the back of the Mirror fits over the angled part of the Mirror Wall
Bracket (L). See Figure 4.
Mirror Wall
Brackets (L)
(back view)
Wall
Stud
Mirror Wall
Bracket (L)
(side view)
Wall
Fig. 4
Mirror Wall
Bracket (L)
(back view)
Fig. 3
Wall
L
H
L
H
x 1
x 2

2170AST Ellison Beveled Mirror
Assembly Instructions
2170AST —Page 5 —06/18
5. To attach the Mirror to an Ellison Dresser, remove the Mirror Wall Bracket (L) that is attached to
the Mirror Frame (B) as shown in Figure 5. Keep these Mirror Wall Brackets (L) and the four #6
x 3/4" Flat Head Screws (F) if in the future, you will want to mount the Mirror to the wall.
6. To attach the Mirror horizontally to the Dresser, use the predrilled holes in the back as noted in
Figure 6.
Use inner holes for 2170
mirror
Dresser
(2139)
Fig. 6
F
x 4
Fig. 5
B
L
F

2170AST Ellison Beveled Mirror
Assembly Instructions
2170AST —Page 6 —06/18
7. Using the predrilled holes on the back of the Dresser as guides, attach the two Mirror Supports
(E) with four M4 x 41 Machine Screws (J). The upper screws will be inserted into the 3rd hole
from the top and the lower screws will be inserted into the 2nd hole from the bottom of the Mirror
Supports. See Figure 7 and 7a.
8. Peel off the backing on the Velvet Pads (K) and apply them to the bottom of the Mirror Assembly
(A). See Figure 8.
K
K
K
Fig. 8
A
J
x 4
J
Dresser
(Back view)
E
J
J
Fig. 7
3rd hole from the top
2nd hole from the bottom
Fig. 7a

2170AST Ellison Beveled Mirror
Assembly Instructions
2170AST —Page 7 —06/18
9. Place the Mirror on top of the Dresser and attach it to the Mirror Supports (E) with four
#7 x 1-1/2" Black Pan Head Screws (I). See Figure 9.
Fig. 9
I
x 4
I
I
I