Whittier Wood Furniture McKenzie 2074AFGAC User manual

Production Code:
09/10
VN
P.O. Box 2827
Eugene, OR 97402 USA
Before you load or move this unit, check to make
sure all screws and supports are tight.
.
Before you begin your project, completely read the
Assembly Instructions.
For normal household use only. Not recommended
for commercial use.
Unload items before you move this unit.
This Assembly requires two people.
Do not climb, sit or stand on this piece of furniture.
Do not not overload drawers or shelves on this unit.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on
a cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
IMPORTANT NOTES:
Model #
73"W McKenzie
Center Channel
Console
2074AFGAC
2074AFCAF
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
Handle the glass plates with care. Glass is fragile.
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent tip-over:
Use of tip-over restraints may only reduce
but not eliminate the risk of tip-over.
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
Never allow children to climb or hang on drawers,
doors or shelves.
Never open more than one drawer at a time.
Assembly Instructions
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
For a replacement part, directly contact Whittier
Wood Products customer service department by
phone, fax, mail or email.
To Order: Provide the furniture model number (found
above the illustration of this unit), the part letter,
production code, quantity needed, reason for replacement,
and your full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
CALL US FIRST! Do not return this item to the store.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.

Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model name.
Part Description Quantity
ATop Assembly (attached) 1
BAdjustable Shelf
Case only
4
D
Speaker Door (attached)
1
Center Adjustable Shelf
C2
ERemovable Back (installed) 2
FGlass Door Frame (installed) 2
GCenter Door (installed) 1
IDoor Glass (installed) 2
H1
Drawer Box (installed)
J2
Drawer Face (installed)
K2
Door Glass Support Rail (attached)
L4
Door Glass Support Stile (attached)
M4
N Shelf Bracket (attached) 24
O #6 x 1/2" Undercut Screw (inserted) 24
Q Butler Hinge (attached) 2
R Magnetic Push Lock (attached) 2
S #5 x 5/8" Flat Head Screw (inserted) 16 (AFGAC)
16 (AFGAC)
4 (AFCAF)
64 (AFCAF)
Y #6 x 5/8" Flat Head Screw (inserted) 36 (AFGAC)
0 (AFCAF)
T Magnetic Plate (attached) 8
U #6 x 5/8" Undercut Screw (inserted)
V Magnetic Catch (installed)
W #6 x 5/8" Philtruss Screw (inserted) 42
X Hinge (attached) 6
6
2074AFGAC_2074AFCAF — Page 2 — 09/10
2074AFGAC; 2074AFCAF 73"W McKenzie Center Channel Console — Parts List

Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and model name.
ZA Drawer Slides (installed) 2
ZB #6x3/4" Philtruss Screw (inserted) 12
ZC #6x1/2" Philtruss Screw (inserted) 16
ZD Assembled Foot (attached) 2
ZE T-Nut (inserted) 6
ZF Adjustable Glide 2
ZG
ZH #8 x 2" Black Screw (inserted) 2
ZI Knob (attached) 5
ZJ #8 x 1-1/2" Machine Screw (installed) 5
ZK Drawer Stop (attached) 4
Turn Button (attached)
ZL 8
ZM #6 x 3/4" Brass Flat Head Screw (inserted) 30
Small Adjustable Glide (installed) 4
ZN #8x1-1/4" Pan Head Screw (inserted) 24
ZO #8x1-3/16" Pan Head Screw (inserted) 38
ZP #8 x 1-1/4" Black Screw (inserted) 18
ZQ #8 x 1-5/8" Black Screw (inserted) 10
ZR #8 x 1" LoProfile Screw (inserted) 12
ZS Flat Washer (inserted) 2
ZT Fitted Back (attached) 1
ZU Chain (attached) 2
TR Tipping Restraint 2 sets
2074AFGAC_2074AFCAF — Page 3 — 09/10
2074AFGAC; 2074AFCAF 73"W McKenzie Center Channel Console
— Parts List continued

2074AFGAC; 2074AFCAF 73"W McKenzie Center Channel Console
Assembly Instructions
Tool Required: Phillips Screwdriver
2074AFGAC_2074AFCAF — Page 4 — 09/10
Fig. 3a
Fig. 3b
Unlocked Position
ZK
ZL
ZT
EE
Fig. 3
Locked Position
Fig. 3c
ZL
ZL
ZK
To insert your media components and access wires more easily, you may want to remove the Removable
Backs (E). To do so, unlock the Turn Buttons (ZL) as shown in Figures 3 and 3b. Slide the Backs away
and place them off to the side. To put them back into place, slide the Backs behind the Drawer Stops (ZK)
and position the Turn Buttons so they are locked. See Figures 3, 3a, 3b and 3c.
3.
Fig. 2
Place the console at its final destination. Rotate the Small Adjustable Glides (ZG) found at the
bottoms of the legs and the Adjustable Glides (ZF) in the bottoms of the two Assembled Feet
(ZD) until the unit is level. See Figure 2.
1.
2. To open the Speaker Door (H), press both corners until the magnets release. Gently grasp
the middle of the door and pull open. To shut the door, gently but firmly push on the Speaker Door
until the Magnetic Plates (T) make secure contact with the Magnetic Push Locks (R). See Figure 2.
If you need to install your speaker from the back, remove the 18 #6 x 5/8" Philtruss Screws (W) and
pull away the Fitted Back (ZT). After installing the component, replace the Fitted Back and attach
with the 18 #6 x 5/8" Philtruss Screws (W).
H
RR
TT
ZT
ZD
ZF ZG
ZG

2074AFGAC_2074AFCAF — Page 5 — 09/10
4. To move the Adjustable Shelves (B, C), remove the #6 x 1/2" Undercut Screws (O) and the Shelves
(B, C). Reposition the Shelf Brackets (N) to the desired positions, replace the shelves and insert the
screws. See Figures 4 and 4a.
ZD
Fig. 4
Doors removed for illustration purposes.
Fig. 4a
O
M
BB
C
Fig. 5b
T4
T1
T2
T1
T1
T3
T3
T4
Fig. 5c
Fig. 5a
Fig. 5d
Tighten the Nylon Restraint
Strap (T2) so there is no slack.
Pull tight
5. Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall stud with two #8 x 2" Black
Screws (T3). See Figure 5a. Attach a second clip to the unit with two #8 x 1" Pan Head Screws (T4).
See Figure 5b. Connect the two clips with the Nylon Restraint Strap (T2). Pull the Nylon Restraint
Strap (T2) tight so there is no slack. See Figures 5c and 5d. Repeat this procedure to attach the
second tipping restraint. If you cannot locate two studs, purchase the proper wall attachment hardware
for your type of wall and secure the unit.
Tipping restraint:
Fig. 5