Whittier Wood Furniture McKenzie Lateral 2403AFGACe User manual

P.O. Box 2827
Eugene, OR 97402 USA
Production Code:
VN 11/13
Model #
2403AFGACe;
2403AFCAFe
McKenzie Lateral
File Cabinet
AFGAC = Glazed Antique Cherry finish
AFCAF = Caffè finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
IMPORTANT NOTES:
For normal household use only. Not recommended for commercial use.
Use a protective pad when you use the top of this piece as a writing
surface.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
This assembly requires two people.
WARNING
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
CALL US FIRST! Do not return this item to the store
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
800-653-3336 •Outside the U.S. or Canada: 541-687-0213 • Fax: [phone]
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.

2403AFGACe; 2403AFCAFe McKenzie Lateral File Cabinet
Parts List
2403AFGACe_2403AFCAFe —Page 2 —11/13
Please identify the parts and check that quantities received match those on this list.
If you need to replace a part, refer to the following letter and part name.
Part
Description
Quantity
Ac
Case Assembly
1
B
Top Assembly (attached)
1
C
Back (attached)
1
D
Drawer (inserted)
2
E
Upper Drawer Face (installed)
1
F
Lower Drawer Face (installed)
1
G
Drawer Divider (attached)
4
H
Lock (attached)
1
I
#6 x 5/8" Philtruss Screw (inserted)
16
J
Drawer Slides (pre-installed sets)
2
K
#6 x 3/4" Philtruss Screw (inserted)
20
L
#6 x 1/2" Philtruss Screw (inserted)
16
M
Knob (attached)
4
N
#8 x 1-1/2" Machine Screw (installed)
4
O
Plastic File Rail (attached)
8
P
#8 x 7/8" Lo-Profile Screw (inserted)
16
Q
#8 x 1-1/4" Pan Head Screw (inserted)
11
S
#8 x 1-5/8" Black Screw (inserted)
8
U
#8 x 2-3/4" Black Screw
3
W
Small Adjustable Glide (installed)
2
X
Tack Glide (inserted)
2
Y
Insert Nut (inserted)
2
ZA
Left Anti-Tip Bar (attached)
1
ZB
Right Anti-Tip Bar (attached)
1
ZC
Anti Tip Security Peg (attached)
4

2403AFGACe; 2403AFCAFe McKenzie Lateral File Cabinet
Parts List
2403AFGACe_2403AFCAFe —Page 3 —11/13
Part
Description
Quantity
ZD
#6 x 1/2" Undercut Screw (inserted)
8
ZE
#6 x 5/8" Undercut Screw (inserted)
4
ZF
#8 x 1-3/8" Lo-Profile Screw (inserted)
6

2403AFGACe; 2403AFCAFe McKenzie Lateral File Cabinet
Assembly Instructions
2403AFGACe_2403AFCAFe —Page 4 —11/13
Tool Required: Phillips Screwdriver
1. Remove the upper drawer from the Case (Ac). To do that, pull up on the left Drawer Release
Lever while pushing down on the right Drawer Release Lever and pull out the drawer. See
Figure 1a. Note where each drawer came from to make sure you place them back into their
correct positions.
2. To remove the lower drawer, rotate the upper toggles near the top of the Left and Right Anti-Tip
Bars (ZA and ZB) to the locked position. See Figures 2 and 2a and 2b. (When the toggles are in
their unlocked positions, you cannot open the lower drawer.) Pull the drawer out as far as you
can and when you can access them, pull up on the left Drawer Release Lever while pushing
down on the right Drawer Release Lever and pull out the drawer. See Figures 2c and 2d.
Fig. 2
Fig. 2a
Unlocked position
Locked position
Fig. 2b
Fig. 2c
Drawer Release Lever
Fig. 2d
Fig. 1
Drawer Release Lever
Fig. 1a

2403AFGACe; 2403AFCAFe McKenzie Lateral File Cabinet
Assembly Instructions
2403AFGACe_2403AFCAFe —Page 5 —11/13
3.
Position the unit at your desired location. To level the unit, twist the Adjustable Glides (W) on the
bottom two front corners. See Figure 4.
There are two ways to help stabilize your file cabinet to reduce the risk of tip-over.
4. Choice #1
Place the cabinet against the wall. Using three #8 x 2-3/4" Black Screws (U), secure the unit to
the wall. See Figure 4.
5. Choice #2
Using three #8 x 2-3/4" Black Screws (U), secure the file cabinet to the floor. See Figure 5.
Fig. 5
U
x 3
U
Fig. 4
U
x 3
U
U
W
Wall

2403AFGACe; 2403AFCAFe McKenzie Lateral File Cabinet
Assembly Instructions
2403AFGACe_2403AFCAFe —Page 6 —11/13
6. Unlock the bottom toggles on the Left and Right Anti-Tip Bar (ZA and ZB) as shown in Figures
6, 6a. Line up the drawer slides on the bottom drawer and push the bottom drawer into the
cabinet. See Figure 6b.
7. Unlock the top toggles on the Left and Right Anti-Tip Bar (ZA and ZB). See Figures 7 and 7a.
Line up the drawer slides in the top drawer with the slides in the cabinet. Gently push the drawer
back into place. See Figure 7b.
Fig. 6
Unlocked position
Fig. 6a
Fig. 6b
Fig. 7
Fig. 7a
Unlocked position
Fig. 7b

2403AFGACe; 2403AFCAFe McKenzie Lateral File Cabinet
Assembly Instructions
2403AFGACe_2403AFCAFe —Page 7 —11/13
8. The file drawers arrive configured to accommodate letter/letter sized files. But each drawer has
the flexibility to be configured as letter/letter, letter/legal or legal/legal. To set up a section to
hold legal files, remove a drawer. Remove one #8 x 1-5/8" Black Screw (S) from the drawer
back and one from the bottom. Move the Drawer Divider (G) to the center slot. Attach the
Divider in place with two #8 x 1-5/8" Black Screws (S). See Figures 8, 8a and 8b. Repeat for as
many sections as you need.
9. Use a protective pad when you use the top of this piece as a writing surface.
Fig. 8
G
Fig. 8a
S
S
S
S
Fig. 8b