Wholesale Interiors 5018 User manual

PG :1 / 1
AFTER A FEW DAYS OF ASSEMBLY, IT WILL HAVE ACCLIMATIZED TO THE ENVIRONMENT. PLEASE TIGHTEN ALL HARDWARE.NOTE:
STEP 4
STEP 1
QTY
HARDWARE LIST
NO
QTYPART LIST
NO
ASSEMBLY INSTRUCTION
CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
BACK REST
HB&FB
1pc
2pcs
1
2
B
1pc
C
STEP 2
1pc
3
A
JCBC SCREW
1pc
D
4pcs
M6 x 50mm
M4 x 65mm
L - KEY
M5 x 65mm
MODEL : 5018 DAYBED - HB,FB+SR
JCBB SCREW 8pcs
M8 x 20mm
SCREW 12pcs
M4 x 32mm
SPRING WASHER
FLAT WASHER
4pcs
4pcs
1/4" x Ø12mm
1/4" x Ø19mm
E
F
G
STEP 3
FRONT RAIL
1pc
4
BACK RAIL
2pcs
5
SLAT
7pcs
4pcs6 LEG
BF
D EC
G
A
5
1
3
4
02-JAN-18
Begin assembly by attaching each Leg (6) to the bottom
of the HB&FB (1) securing with 2 Wood Screws (A) per panel.
Attach the Back Rest (2) to the back of each HB&FB (1) by aligning the hole and securing with 2 Allen Bolt (C), 2 Spring Washer (D), 2 Flat Washer (E)
from the back side per each end. (DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Attach the Front Rail (3) and Back Rail (4) to the HB&FB (1)
aligning holes and securing with 2 Allen Bolts (B) per each end.
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Tighten all bolts from STEP 2 using the Allen Wrench (F) that has been provided.
Now only tighten bolts for STEP 3 using Allen Wrench (G).
Attach Slat (5) to Front Rail (3) and Back Rail (4) by unrolling and securing with 4 Wood Screws (A)
2 per each side.Tighten all screws using philips head screwdriver (not included)
L - KEY
Your new day bed is now complete
6
2
A
Tighten all screws using philips head screwdriver (not included)

PG :1 / 1
AFTER A FEW DAYS OF ASSEMBLY, IT WILL HAVE ACCLIMATIZED TO THE ENVIRONMENT. PLEASE TIGHTEN ALL HARDWARE.NOTE:
STEP 1
QTY
HARDWARE LIST
NO
QTYPART LIST
NO
ASSEMBLY INSTRUCTION
CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
BACK RAIL
FRONT RAIL
1pc
1pc
1
2
D
E
STEP 3
2pcs
3
C
1pc
L - KEY
M5 x 65mm
JCBB SCREW 8pcs
M8 x 20mm
SCREW 8pcs
M4 x 32mm
SIDE RAIL
2pcs
4
SLAT
7pcs
FULL SET
TRUNDLE
DE
C
4
1
2
3
3
MODEL : 5018 DAYBED - TRUNDLE STEP 2
B
A6pcs
CASTOR
CHIPBOARD SCREW 24pcs
M4 x 16mm
1
2
AB
Begin assembly by attaching each Castor
(A) to the bottom of the Front Rail (1) and
Back Rail (2) using 4 Wood Screw (B)
per Castor.
Attach the Front Rail (1) and Back Rail (2)
to the Side Rail (3) aligning holes and
securing with 2 Allen Bolts (D)
per each end. Tighten all bolts using the
Allen Wrench (E) that has been provided.
Attach Slat (4) to Front Rail (1) and Back
Rail (2) by unrolling and securing with 4
Wood Screws (C) 2 per each side.Tighten
all screws using philips head screwdriver
(not included)
Your new day bed trundle unit is now complete
02-JAN-18