Wholesale Interiors BBT 6751 User manual

ASSEMBLY INSTRUCTIONS
MODEL : BBT 6751 KING BED
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
PART LIST
ITEM DESCRIPTION QTY
AHEADBOARD (LEFT) 1 PC
BHEADBOARD (RIGHT) 1 PC
CFOOTBOARD 1 PC
DSIDE RAIL (L&R) 2 PCS
ECENTER RAIL 2 PCS
FCENTER SUPPORT LEG 6 PCS
GLEG 4 PCS
HBED SLAT 1 SET
ISIDE RAIL SUPPORT 2 PCS
PAGE 1 OF 4
12
STEP 1 STEP 2
A
B
A
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 20mm 4 PCS
2 JCBC BOLT M6 x 30mm 2 PCS
3 JCBC BOLT M6 x 45mm 8 PCS
4 JCBB BOLT M8 x 40mm 4 PCS
5 JCBB BOLT M8 x 50mm 16 PCS
6M6 SPRING WASHER 6 PCS
7M6 FLAT WASHER 6 PCS
8M8 SPRING WASHER 20 PCS
9M8 FLAT WASHER 20 PCS
10 WOOD SCREW M4 x 25mm 12 PCS
11 WOOD SCREW M4 x 38mm 12 PCS
12 WOOD DOWEL M10 x 30mm 10 PCS
13 M4 ALLEN KEY (BALL SHAPE) 1 PC
14 M5 ALLEN KEY (BALL SHAPE) 1 PC
15 VMB 3062 L Bracket 2 PCS
16 VMB 3069 1 PC

14
5
8
9
ASSEMBLY INSTRUCTIONS PAGE 2 OF 4
STEP 3 STEP 4
x 4
E
F
12
G
D
D
G
8514
R
L
9
STEP 6.1 STEP 6.2
STEP 5 STEP 6
STEP 4.1
STEP 4.2
7
6
2
13
16
x 2
10

ASSEMBLY INSTRUCTIONS
STEP 7 STEP 8
STEP 9
D
C
14
5
8
STEP 7.1 STEP 7.2 9
STEP 9.1 STEP 9.2
STEP 9.3 STEP 9.4
48
9
14
10
10
7
6
2
13
13
1
76
A
D
A
STEP 8.1 STEP 8.2 Don't screw tied
**Finish step 9,
Please screw tied the step 8 bolt.
PAGE 3 OF 4
15
A
G

ASSEMBLY INSTRUCTIONS
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
STEP 10 STEP 11
STEP 12 STEP 13
E
AI
13
H
11
3
I
PAGE 4 OF 4