Wholesale Interiors BBT 6729 User manual

ASSEMBLY INSTRUCTIONS
MODEL : BBT 6729 KING BED PARTS LIST
ITEM DESCRIPTION QTY
AHEADBOARD 1 PC
BFOOTBOARD 1 PC
CSIDE RAIL 2 PCS
DCENTER RAIL 2 PCS
ECENTER SUPPORT LEG 6 PCS
HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 20mm 8 PCS
2JCBB BOLT M8 x 50mm 4 PCS
3M6 FLAT WASHER 8 PCS
4M6 SPRING WASHER 8 PCS
5WOOD SCREW M4 x 38mm 12 PCS
6M4 ALLEN KEY (BALL SHAPE) 1 PC
7M5 ALLEN KEY (BALL SHAPE) 1 PC
8201 LEG BRACKET 4 PCS
9WOOD SCREW M4 x 20mm 20 PCS
10 M8 FLAT WASHER 8 PCS
11 M8 SPRING WASHER 8 PCS
12 5/16" HEX NUT 4 PCS
13 SPANNER 13mm 1 PC
FSLAT 1 SET
GBED LEG 4 PCS
STEP 2.1
STEP 1
STEP 2
PAGE 1 OF 3
B
E
DA
12
10
13
11
8
G
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
STEP 2.2
6
G
1
A
3
4
x 2
BACK VIEW
FRONT VIEW
STEP 1.1 STEP 1.2
A
2
7
11
10

ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
PAGE 2 OF 3
CA
7
G
1
6
4
A
G
3
CB
7
G
1
6
4
B
G
3
STEP 3.1 STEP 3.2
Don't screw tied.
STEP 4.1
STEP 3.2
Don't screw tied.
STEP 4.2
Don't screw tied.
STEP 4.2
Don't screw tied.

ASSEMBLY INSTRUCTIONS
* When moving the bed position, the center support legs
must be adjust to be straight to avoid any broken problem.
STEP 5
STEP 7
5
PAGE 3 OF 3
F
AD
AD
9
STEP 5.1
STEP 5.2
9
9
STEP 5.1
STEP 5.2
STEP 6
STEP 8
**Finish step 5,
Please screw tied the step 3,4 bolt.