Wholesale Interiors MLM-210013 User manual

1-5
ASSEMBLY INSTRUCTIONS

Avoid using sharp objects such as knife to cut open packing as you may accidentally
damage the upholstery.
A. Seat (Loveseat)
1x
B. Backrest (Loveseat)
1x
C Armrest/Legs
.
6x
D Seat (single Seater)
.
2x
E. Backrest (Single Seater)
2x
F Front/Back Panel (Coffee Table)
.
2x
G Side Panel/Legs (Coffee Table)
.
2x
H.Table glass
1x
H Bolts / Washers
.
H Allen Key
.1x
2-5
46x
PARTS AND HARDWARE
Some joint parts on our hand made rattan furniture might be shifted slightly during transportation.
If you encounter problems like unbalanced chairs after assembling,
please contact our customer service or try to hit it lightly against the floor a few times.
Please refer to the video link below for your reference:
https://1drv.ms/v/s!AsP2P9ym9PwAgV9G4i-zpAwaHGMT

x 8 Used
ASSEMBLY INSTRUCTIONS (Coffee Table)
1.Take the feet (H). 2. A fixing game by screwsH),assemble the pieces(F) on each side of the
feet(G).Do not screw the screws completely.
3. A fixing game by screws(H),assemble the
another feet(G) on the table as shown in Figure 3.
4. Tighten all screws completely.
3-5

ASSEMBLY INSTRUCTIONS (Single Seater)
ASSEMBLY INSTRUCTIONS(Loveseat)
5.Locate seat (Loveseat)(A). 6.Affix washers to bolts(I),assemble legs/arms(C) on
each side of the loveseat(A).Do not fully tighten bolts.
7.Affix washers to bolts(I),assemble backrest
(Loveseat)(B) to the back of seat (A) as shown in
figure below.
8.Tighten all bolts completely.
9.LOcate seat (Single seater)(D). 10.Affix washers to bolts(I),assemble legs/arms(C) on
each side of the seat(D).Do not fully tighten bolts.
11.Affix washers to bolts(I),assemble backrest
(Single Seater)(E) to the back of seat (D) as shown in
figure below.
12.Tighten all bolts completely.
5-5
4-5
13.Repeat steps 9-12 for the second single seater.