Wi Digital Systems AudioLink Pro System manual

OWNER’S MANUAL
OPERATING INSTRUCTIONS
Pocket Portable Stereo Digital Wireless
Instruments & Audio Monitoring System
TM AudioLink Pro
TM

Thank You For Choosing Wi Digital Systems
Congratulations on your purchase of the Wi AudioLink Pro Pocket Portable Stereo Digital Wireless
Instruments & Audio Monitoring System with 2-Way Wireless USB 2.0 Audio Interface.
Please thoroughly read this User’s Manual for all the feature operation information necessary
to install and operate your new Wi AudioLink Pro system.
Notice: Product specications and package contents are subject to change without notice.
Package contents may vary according to the different regions.
For additional support, please visit www.widigitalsystems.com
CONGRATULATIONS!

3
TABLE OF CONTENTS
TECHNICAL SUPPORT 4
PACKING LIST 5
SYSTEM CHARGING & PAIRING 6
GUITAR SETUP 8
STEREO GUITAR SETUP 10
KEYBOARDS SETUP 12
INSTRUMENTS SETUP 14
RECEIVER CONNECTION 16
AUDIO MONITORING 18
SMART DEVICE WIRELESS GUITAR CONNECTION 20
2-WAY WIRELESS USB AUDIO INTERFACE 22
MAC & PC USB SETUP 24
iPad, Surface & Tablet PC USB SETUP 28
2-WAY WIRELESS USB GUITAR CONNECTION 30
WIRELESS USB AUDIO LISTENING 32
WIRELESS USB VoIP & PODCASTING 34
WI TRANMITTER FEATURES 36
WI RECEIVER FEATURES 40
BUTTON FUNCTIONS & LED INDICATORS 44
SYSTEM SPECIFICATIONS 48
FCC NOTICE & RECYCLING INFO 50
WARRANTY 52
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------

TECHNICAL SUPPORT
Getting Answers!
We want you to get the most from your new WiAudioLink Pro stereo digital wireless audio system!
Simply logon to www.widigitalsystems.com and access the resources available online including
instructional manuals and more.
Our customer service support staff are ready to assist you with any question you may have.
Your Wi AudioLink Pro comes with 90 days of telephone support and one year of service coverage.
There are several ways to contact Wi Digital Systems customer service support.
E-Mail: [email protected]
Website: www.widigitalsystems.com/support
Technical support: [phone]
4

PACKING LIST
5
1/4” to 1/8” TRS
Mono Cable
1/8” to 1/8” TRS Stereo Cable &Adapter
1/8” Male to 1/4” Stereo
TRS Male Y-split Cable
Universal USB
AC Charger
USB Y-Split
Power Cable MIC/Headphone
Adapter
Wi Transmitter
USB Data Cable
Hard Shell
Carrying Case
Wi Receiver

6
Charging The System
Before using your new Wi AudioLink™ Pro digital wireless system,
you need to fully charge the batteries for approximately 2 hours.
1. Plug the AC Charger into a power socket.
2. Connect the USB power cable to the USB port on the AC charger.
3. Connect one of the two mini USB connectors to the Transmitter
USB port.
4. Connect the second mini USB connector to the Receiver USB port.
5. The Power/Status LED will turn to solid Red ON.
6. When charging is complete the Red LED will turn OFF.
The system’s power source’s exible design boasts 4 power options:
• 4~6 hours internal rechargeable battery use.
• 13 hours with USB AA battery adapter (optional accessory).
• Continuous use with AC power adapter.
• Continuous use with USB port bus power.
POWER
LINK
AC Charger
USB Port
Mini USB
Connector
USB Port
USB Connector
CHARGING

7
PAIRING
Pairing the Wi Transmitter & Receiver
The Wi Transmitter and Receiver are paired at the factory. Perform the
following steps ONLY if you need to reestablish connection between
the Transmitter and the Receiver.
1. First turn ON the Transmitter (Tx) and the Receiver (Rx) by pressing and
holding the POWER button , on each of the units for 2 seconds.
The green LED on Each unit will ash.
2. Press and hold the LINK button on the Transmitter (Tx) for 3 seconds.
The Power/Status green LED on the Transmitter will start ashing faster.
The Transmitter is now in a Pairing mode and ready to search for the Receiver.
3. Press and hold the LINK button on the Receiver (Rx) for 3 seconds.
The Power/Status green LED on the Receiver will ash momentarily.
4. Once the Transmitter links with the Receiver, the Power/Status LED on both
devices will turn to solid green.
5. The Transmitter and Receiver are now ready for use.
(Tx)
pk
zv
(Rx)
p
k
z
v
r

Active, Passive & Acoustic Electric Guitars
The Wi AudioLink Pro Transmitter supports passive and active
guitars including lead, bass and acoustic electric guitars.
1. First locate the 1/4” to 1/8” mono cable
supplied with kit.
2. Connect the 1/8” end of the cable
to the “Audio Input” jack on the
Transmitter.
3. Connect the 1/4” end of the cable
to the electric guitar input.
4. Verify if you are connecting a passive or
active electric guitar to the Transmitter.
If the electric guitar uses a battery to
operate, then it is an active type. If not,
it is a passive type.
8
GUITAR SETUP
j
5

4.1 Passive Guitar Connection
Power up the Transmitter by pressing and holding the POWER button for 2 seconds.
F
The standard factory power up setting is set for Passive Guitars / Mono Preamp Line-In.
This is indicated by the slow ashing Blue LED. The ashing Green LED indicates the
Transmitter is searching for the Receiver .TheTransmitter can remember and power up in
the last power up mode selected . Please refer to the “Tx Button Functions” on page (44)
for more details.
4.2 Active Guitar & Electric Acoustic Instrument Connection
a. Power up the Transmitter by pressing and holding the POWER button for 2 seconds.
b. Press and hold the Mode button for 2 seconds to change to Mono Line-in mode.
F
The fast ashing Blue LED indicatesActive Guitar / Mono Line-in connection mode and
the ashing Green LED indicates the Transmitter is searching for the Receiver . The ashing
Green LED on the Transmitter will turn to solid green once the Receiver is powered up, paired and
linked with the Transmitter. Please refer to the “Tx Button Functions” on page (44) for more details.
5. Attach the Wi AudioLink to the Guitar Strap or to your belt.
6.. Please proceed to the Receiver connection instructions on page 16.
k
r
k
9
GUITAR SETUP
(Tx)
k
r

10
STEREO GUITAR SETUP
Stereo Electric Guitars
The Wi AudioLink Pro Transmitter supports guitars with
stereo/dual pickup outputs.
1. First locate the 1/8” to 1/8” TRS stereo cable with the
1/8” to 1/4” stereo adapter supplied with kit.
2. Connect the 1/8” stereo male end of the cable
into the “Audio Input” jack on the Transmitter.
3. Connect the 1/4” Stereo male end of the
cable/adapter to the electric guitar input.
j