Widex MOMENT WPC101 User manual

GB
ES
FR
IT
JP
SC
US
USER INSTRUCTIONS
WIDEX mRIC CHARGE n CLEAN
WPC101 model

GB USER INSTRUCTIONS ........................................................................3
ES INSTRUCCIONES DE USO ................................................................25
FR MODE D’EMPLOI .............................................................................46
IT LIBRETTO D’INSTRUZIONI ..............................................................68
JP 取扱説明書 .................................................................................89
SC 用户使用手册 .............................................................................111
US USER INSTRUCTIONS .................................................................... 129
FCC AND ISED STATEMENTS .................................................................148
2

3

IMPORTANT SAFETY INFORMATION
Read these pages carefully before you start using your charger.
Keep the charger and other small parts away from children, pets, and
mentally disabled people.
Never expose the charger to temperatures above 60° C (140° F), to
prolonged sunlight, open flames or ignition sources.
Place the charger upright on a flat, stable surface when charging, with
adequate space around the charger. Do not cover or place near flam-
mable substances. This also applies when using a power bank.
Never try to open or repair the charger yourself. Contact your hearing
care professional if you experience defects.
Use only a Widex charger with your hearing aids. Use of a charger not
recommended by WIDEX A/S may compromise the system or result in
dangerous situations.
Never leave the charger in direct sunlight and do not immerse it in wa-
ter.
Never insert other objects than your hearing aids in the charging wells.
Use only a Widex power adapter and cable with your charger.
4

YOUR CHARGER
Welcome
Thank you for choosing this product. Your new WIDEX MOMENT™CHARGE
n CLEAN charger is intended to detect, charge and maintain your WIDEX
MOMENT™MRR2D hearing aid.
Read these instructions carefully before you start using this device.
NOTE
Your charger may not look exactly like the one illustrated in this booklet. We
reserve the right to make any changes we consider necessary.
The charger at a glance
The charger consists of a charging unit for each hearing aid, a mainte-
nance compartment for the receivers and a light indicator with three indi-
cator lights that show the charging status of the hearing aids and the sta-
tus of the maintenance cycle.
5

5
IMPORTANT SAFETY INFORMATION
Read these pages carefully before you start using your charger.
YOUR CHARGER
Welcome
Thank you for choosing this product.
Your new WIDEX MOMENTTM mRIC Charge n CLEAN charger is intended to detect,
charge and maintain your WIDEX MOMENTTM mRIC MRR2D hearing aid.
Read these instructions carefully before you start using this device.
NOTE
Your charger may not look exactly like the one illustrated in this booklet. We
reserve the right to make any changes we consider necessary.
The charger at a glance
The charger consists of a charging unit for each hearing aid, a maintenance
compartment for the receivers and three indicator lights that show the charging
status of the hearing aids and the status of the maintenance cycle.
2
3
65 7
4
1
1. Micro USB port
2. Left hearing aid charging well
3. Right hearing aid charging well
4. Receivers maintenance compartment
5. Left hearing aid charge indicator light
6. Right hearing aid charge indicator light
7. Maintenance indicator light
1. Micro USB port
2. Left hearing aid charging well
3. Right hearing aid charging well
4. Maintenance compartment for the
receivers
5. Left hearing aid charging indicator
light
6. Right hearing aid charging indicator
light
7. Maintenance indicator light
Operating, storage and transport conditions
Your charger is designed for indoor use. It is sensitive to extreme condi-
tions such as high temperatures, and it should not be operated, stored or
transported in direct sunlight.
Operate the charger within the following conditions:
Minimum Maximum
Temperature 0° C (32° F) 35° C (95° F)
Humidity 20% rH 75% rH
6

Store and transport the charger within the following conditions:
Minimum Maximum
Temperature -20° C (-4° F) 60° C (140° F)
Humidity 5% rH 90% rH
Atmospheric pressure 750 mbar 1060 mbar
You can find technical data sheets and additional information on your
charger on https://global.widex.com.
7

OPERATING THE CHARGER
Getting ready for use
Power supply
For optimal operation, connect your charger to the mains and use only the
included cable and power supply.
7
OPERATING THE CHARGER
Power supply
For optimal operation, connect your charger to the mains and use only the
included cable and power supply.
Check that your USB port is at
least compatible with USB 2.0.
If it is not, the device (charging
and maintenance) will not work.
USB 2.0
Logo
Connect the cable to the charger:
1. Micro USB port
1
Please make sure that the
USB port is USB 2.0 compati-
ble.
Connect the cable to the charger:
7
OPERATING THE CHARGER
Power supply
For optimal operation, connect your charger to the mains and use only the
included cable and power supply.
Check that your USB port is at
least compatible with USB 2.0.
If it is not, the device (charging
and maintenance) will not work.
USB 2.0
Logo
Connect the cable to the charger:
1. Micro USB port
1
8

Power on
When the charger is connected to the power supply, the indicator lights
flash white 5 times and then turn off:
8
The charger is now in standby mode and ready to charge your hearing aid.
Power on
When the charger is connected to the power supply, the light indicators flash
white 5 times and then turn o:
5X
Right hearing aidLeft hearing aid
Charging the hearing aid
Gently place your hearing aids in their respective charging wells and the
receivers in the maintenance compartment. The hearing aids turn o
automatically. Then close the lid.
The charger is now in standby mode and ready to charge your hearing
aid.
Charging the hearing aid
Gently place your hearing aids in their respective charging wells and the
receivers in the maintenance compartment. The hearing aids turn off au-
tomatically. Then close the lid.
8
The charger is now in standby mode and ready to charge your hearing aid.
Power on
When the charger is connected to the power supply, the light indicators flash
white 5 times and then turn o:
5X
Right hearing aidLeft hearing aid
Charging the hearing aid
Gently place your hearing aids in their respective charging wells and the
receivers in the maintenance compartment. The hearing aids turn o
automatically. Then close the lid.
9

Left hearing aid Right hearing aid
When connected to the power supply, the charger can charge two hearing
aids simultaneously. Depending on the state of the hearing aids, each
hearing aid can also be charged individually. If one hearing aid is fully
charged and placed in the charger, it will not charge, but the other hear-
ing aid, which is not fully charged, will be charged.
Charging your hearing aid fully will take approximately 4 hours. If you
charge your hearing aid for half an hour, you will have approximately 4
hours of use.
While charging the hearing aids, the maintenance (Ultraviolet-C treat-
ment and drying) is carried out. The maintenance cycle takes 30 minutes.
Charging indicators
While the charger is detecting the hearing aid, the light indicator turns
solid yellow:
10
Charging indicators
While the charger is detecting the hearing aid, the light indicator turns
solid yellow:
Once the charger has detected the hearing aid, the charging will begin.
The light indicator will flash green to indicate that the hearing aid is low
on battery and less than 40% charged:
Once the charger has detected the hearing aid, the charging will begin.
10