Wiedamark 656 User manual

Wiedamark.com • 4016 Harry Hines Blvd, Dallas, Texas 75219 • 800.893.9787
Technical Data
Power consumption: 14 Watts
Color: White
Twinkle Wheel (Installed)
Light Source: 2 7 Watt White LEDs
Estimated Life of LEDs: 50000 hours
Size: L125 x W126 x H 88mm ( L 4.92 in x 5 in x 3.15 in)
Net weight of Light Engine: 0.6 Kg (1.4 lbs)
Installation
e installation dimension of the Light Engine.
4.05 inches
3.5 inches
5 inches
1.2” 2.1”
4.5 inches
5 inches
656 3 Size Star LED Fiber Optic Star Ceiling Kit
Battery for the Remote: e battery for the remote is a
12 Volt 27A. e battery dimensions are 1” x .30” or
28mm x 8mm. Note: Be extremely careful when re-
moving the three (3) tiny screws out of the remote. e
screws are holding the entire remote casing together.
Fiber Length
Options:
•Two 328 strand bundles available in
12, 20, 24, 28 or 32feet lengths
• One 16 and One 24feet lengths
Fiber
Diameters:
240 - 0.75mm, 72 - 1.0mm,
and 16 - 1.5mm
UL Rated
12VDC
Transformer
with US Plug.

Notice: Rotations Per Minute (RPM) is the speed of the twinkle wheel.
Wiedamark.com • 4016 Harry Hines Blvd, Dallas, Texas 75219 • 800.893.9787
DIP Switch Chart
Remote Control Operation
e power button is used to turn on and o the light engine.
To turn on the remote feature, set dip switch number 6 down to activate
the remote controller.
Manual Control for Twinkle Wheel Speed
Use the dip switches to select from 6 dierent speed levels. For the
slowest speed dip switches 2 & 3 should be ON and 1, 4, and 5 switches
set to OFF.
Note: e speed of the twinkle wheel is only controlled manually via the
dip switches.
Stopping the Twinkle Wheel with the Remote
As the twinkle wheel turns, press the Play button to stop twinkle wheel
and have solid stars.
Dimming
e brightness buttons on the top of the remote allows you to adjust
the brightness of the lighting at 8 levels. You can also adjust the lighting
manually by using the dimming screw on the side of the light engine.
Brightness Adjusting
Play
Power ON/OFF
656 3 Size Star LED Fiber Optic Star Ceiling Kit

Wiedamark.com • 4016 Harry Hines Blvd, Dallas, Texas 75219 • 800.893.9787
Installation of the ber Ends
Drill holes on the panel or ceiling you wish to install the ber optic
cables. Pull the bers through the holes and use glue (we recommend
using Elmer’s All Multipurpose White Glue) to secure the bers in
place. For more tips on ber installation visit our website
WieDaMark.com and view our Installation Videos page.
Safety Instructions:
1. Keep out of rain or moist areas to avoid shock hazards.
2. Avoid use in high temperatures (< 40ºC or < 104°F).
3. Keep Light Engine in ventilated area.
4. e light engine has a safety feature that will turn the light engine o
to prevent it from over heating.
656 3 Size Star LED Fiber Optic Star Ceiling Kit