Wiedamark 7x15W RGBWA+UV User manual

6
6I IN N1 1 L LE ED D P PA AR R
INSTRUCTION MANUAL

INSTRUCTION OF BUTTONS
DESCRIPTION OF MENU
STAT FUNCTION
-Choose [STAT] and press [ENTER] to “stat mode” ( manual mode )
-Press [ENTER] to choose : [Red], [Green], [Blue],[Amber], [White], [Strobe]
-Press [UP] / [DOWN] to choose the value ( 0 to 255 for level of each color and 0 to
20 for frequency of strobe )
-Press [MENU] back to the main menu
AUTO FUNCTION
-Choose [AUTO] press [ENTER] toenter I auto mode
-Press [UP]/[DOWN] to choose the built-in program or edit program ( AT01 to AT10
programs cannot be modified by edit function / PR01 to PR10 programs can be modified
by edit function )
-Press [MENU] Back To The Main Menu
DMX FUNCTION ( DMX ADDRESS SETTING )
-Choose [DMX] press [ENTER]
-Press [UP]/[DOWN] to choose [1~512] value
PERS FUNCTION ( DMX OPERATING MODE )
-Choose [PERS] and press [ENTER]
-Press [UP]/[DOWN] to choose the dmx channel modes, (for details, please check on the
dmx channels on the following)
ID FUNCTION
-Choose [ID] and press [ENTER]
-Press [UP]/[DOWN] to choose [1~255] value
EDIT FUNCTION
Key code : UP, DOWN, UP, DOWN + ENTER
UP : Use to choose operating mode, DMX address or to set parameters
DOWN : Use to choose operating mode, DMX address or to set parameters
ENTER : Use to validate your choice
MENU : Use to select a function or to come back to the previous menu
MENU ENTER UP DOWN

-Choose [EDIT] and press [ENTER]
-Press [ENTER] to choose the parameter values
-Press [UP] / [DOWN] to choose program, scene or parameters values ( red [R), green [G], blue [B], white [W], amber
[A], strobe [S], time [T] and fade time [F] )
Sound FUNCTION
( Sound control Strobe)
( Sound control brightness)
( Sound control color changing)
SET FUNCTION
-Choose [SET] and press [ENTER]
-[UPLD] : sending edit program value from current master unit to slave
unit : To do it, press [ENTER] then do the key code [UP, DOWN, UP,
DOWN] and press [ENTER], light turn to yellow, means data was
sending meanwhile there will show the speed of upload, light will turn
to green when finished sending, and the slave unit will turn to yellow
too when receive the data,and turn to green when finished receiving. if
the slave unit protect to yellow,it means fail receiving, please cut off
the power and receive again.
-[REST] : To load the factory setup.
-Press [ENTER] and do the key code : [UP, DOWN, UP, DOWN] then press [ENTER]
-[ID] : ID address setting, Press [ENTER], press [UP] / [DOWN] to choose [ON] to allow ID address function, [OFF] close
ID address function
-[RGBW] : color deviation correcting setting, Press [ENTER], press [UP] /[DOWN] to choose [ON] to allow color
deviation correcting function,[OFF] not allow. the proportion of RGBW colors can be set in the menu [CAL2]
-[DIM] : non-linear dimming setting, Press [UP] /[DOWN] to choose : [OFF] close dim speed, [DIM1] to [DIM9] to
choose speed ( speed 1 (fast ), ….., speed4 (slow), as the speed is slower as dimming softer.
-[DV] : Digital photography color choosen, Press [ENTER], and use [UP] /[DOWN] to choose between [NTSC] or [PAL]
CAL1 FUNCTION ( WHITE BALANCE FUNCTION )
-Choose [CAL1] and press [ENTER]
-Press [UP] /[DOWN] to choose [WT1~11] then press [ENTER] to set up to 11 different temperature of white color

-Press [ENTER] to choose [Red], [Green], [Blue], [White]
-Press [UP] /[DOWN] to choose value [0~255]
CAL2 FUNCTION ( COLOR DEVIATION CORRECTING SETTING )
-Choose [CAL2] then press [ENTER] to [RGBW]
-Press [ENTER] to choose [Red], [Green], [Blue], [White]
-Press [UP] /[DOWN] to choose the proportion of colors [0~510]
-When the RGBW function is on ( menu SET ) and when on DMX RGB =255,255,255, the white color is the one set in
CAL2 function
KEY FUNCTION ( PROTECTION KEY SETTING )
-Choose [KEY] then press [ENTER] ; The key code is [UP, DOWN, UP, DOWN] and press [ENTER]
-Press [UP] /[DOWN] to choose [ON] or [OFF]
Display Screensaver
A001 dmx 512 mode
M…As Master (when ----- AUTO , SOUND , STATE : R G B W A I )
S…As Slaver
Temperature control function
●When led board’s temperature>70°, light fixture will lower the working current to protect the led.
●Poweron lighting fixtures, fan not working
●When led board’s temperature>50°, fan working with low speed.
When led board’s temperature>60°, fan working faster and at normal speed
DMX CHANNEL TABLE
7 kind DMX channel mode：【STAG】、【ARC.1】、【AR1.d】、【ARC.2】、【AR2.d】、【AR2.S】、【HSV】
STAG CHANNEL MODE
CHANNEL
VALUE
FUNCTION
1
0~255
DIMMING
2
0~255
RED
3
0~255
GREEN
4
0~255
BLUE
5
0~255
white
6
0~255
Amber
7
0~255
Purple (UV)
8
0-9
10-255
NO FUNCTION
COLOR MACRO

9
0~9
NO STROBE
10~255
SPEED OF STROBE（255 faster）
10
0~9
NO FUNCTION
10~99
HSV effect
100~119
3 colors glowing , Pure color
120~139
7 colors glowing , Pure color
140~159
7 colors glowing , Diffuse color
160~179
DMX control color fading Strobe
180~199
7 colors Strobe
200~219
7 complementary color Strobe
220~239
7 colors water-running
240~255
Sound control color changing
11
0~255
Adjust Speed of Build-in AUTO running program
12
0~255
Speed of dimming
13
0
Whole ID address controled
1~ 255
The same ID address controled
ARC.1 CHANNEL MODE
CHANNEL
VALUE
FUNCTION
1
0~255
RED
2
0~255
GREEN
3
0~255
BLUE
4
0~255
White
5
0~255
Amber
6
0~255
Purple (UV)
AR1.d CHANNEL MODE
CHANNEL
VALUE
FUNCTION
1
0~255
MASTER DIM
2
0~255
RED
3
0~255
GREEN
4
0~255
BLUE
5
0~255
White
6
0~255
Amber
7
0~255
Purple (UV)
ARC.2 CHANNEL MODE
CHANNEL
VALUE
FUNCTION
1
0~255
RED
2
0~255
GREEN
3
0~255
BLUE
4
0~255
white
5
0~255
Amber
6
0~255
Purple (UV)
7
0~255
Speed of dimming

AR2.d CHANNEL MODE
CHANNEL
VALUE
FUNCTION
1
0~255
MASTER DIM
2
0~255
RED
3
0~255
GREEN
4
0~255
BLUE
5
0~255
White
6
0~255
Amber
7
0~255
Purple (UV)
8
0~255
Speed of dimming
AR2.S CHANNEL MODE
CHANNEL
VALUE
FUNCTION
1
0~255
MASTER DIM
2
0~255
RED
3
0~255
GREEN
4
0~255
BLUE
5
0~255
White
6
0~255
Amber
7
0~255
Purple (UV)
8
0~255
Speed of Strobe
HSV CHANNEL MODE
CHANNEL
VALUE
FUNCTION
1
0~255
H hue(0~100%)
2
0~255
S saturation (0~100%)
3
0~255
V brightness(0~100%)
4
0~255
Speed of dimming
The following points have to be considered during the inspection:
All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
There must not be any deformations on the housing, glass pane, fixations and installation spots.
The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions depending
on the installation spot and usage have to be adhered to by a skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents.
CAUTION: Disconnect from mains before starting maintenance operation!
Cleaning and Using Frequency of Product
Please make sure that the light is power off before dismantling or maintaining, it’s very important to keep the light clean.
Frequent cleaning will ensure maximum brightness output, but also prolong the life time. It’s suggested to use the high
quality, professional glass detergent and soft cloth to clean the light. It’s not allowed to use alcohol or chemical solvent. The
inner part of the light should be cleaned by vacuum cleaner at least once a year.
When the light doesn’t work, please check if the fuse is burnt out or not. If it is, the same fuse should be replaced, find out
the faulty and restart the light. But please note the repair must be handled by professional.

TECHNICAL SPECIFICATIONS
DMX Channels: ...........................................................................................................................4 / 13
Beam angle:....................................................................................................................................25°
Control mode: ................................................................................ Auto, Master/ Slave, DMX,Sound
LED power: .......................................................................................7 x 18W RGBAW UV LEDs 6-in-1
Life time led ...................................................................................................................50000 hours
IP norm: …………………………………………………………………………………………………..………………………..…IP-20
Working environment: ........................................................................................................... indoor
Voltage: ......................................................................................................... AC 100-240V / 50-60Hz
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.