WifiRanger Converge Denali User manual

!
©2020 LinOra Corp - DENALISIM_V1!Questions? [e-mail] / 208-321-5544 p.1
LTE SIM SWAP GUIDE
ROOFTOP SYSTEM: DENALI
LTE connectivity requires a data plan supported by an authorized Cellular Carrier (sold separately)
Converge
TM
by
WIFIRANGER
TM
▼INSTALL TOOLS ▼
Drill + PH2 extended bit
(or PH2 screwdriver)
▼LTE SIM SWAP ▼
1) Unscrew Denali hood
2) Remove Denali hood
3) Remove tray
DENALI
WIFIRANGER
by
C ONVERGE
™
TM

©2020 LinOra Corp - DENALISIM_V1!Questions? [e-mail] / 208-321-5544 p.2
▼LTE SIM SWAP ▼
4) Locate SIM slot on underside of
tray assembly
5) Peel back retainer sticker from
SIM slot
6) Press old SIM card to eject from
SIM slot then remove
7) Orient new SIM card with golden
side facing up as shown
10) Reinsert tray onto base of
Denali
11) Place hood back on Teton base
and ensure back groove is fitted
12) Tighten screws for hood at
hand-snug level (do not use high torque)
8) Insert new SIM card into SIM slot
9) Reseal retainer sticker to secure
new SIM card