WILL Convection Series User guide

Assembly and instruction manual
Series:
Convection
Please read the instructions carefully before use.
Take good care of thismanualfor later use.

Thanks for buying Will
Our company was founded in Norway in 1992 by Cato Bryn, specializing in distribution
sell to many of the largest retailers in the Nordic countries.
In 2010, Cato’s son, Phillip joined the company. Philip looked at the heating industry
with fresh new eyes and wondered why there had been so little change with the
appearance of portable heaters in the last 20 years, especially since interior design in
general had changed dramatically over the years. Philip thought consumers should
have more styles to choose from other than the typical old-fashioned, traditional
heaters.
Since heaters are part of so many homes, Philip and Cato decided to use their
extensive knowledge to re-invent the design of heaters. They wanted to create
beautiful, modern and minimalistic heaters, using the most advanced technology, that
would complement people’s homes. They launched the brand and company Mill
International AS in 2012, and the new design and technology of their heaters quickly
became a success in the Nordics.
to complement our line of products to meet consumers’ demand.
Will
Prospering on our success in the Nordics we decided to promote our heaters at some of
the world’s largest electronic fairs and home shows in 2015 and 2016 - the feedback from
retailers and distributors all over the world were amazing. We are proud to say that
consumers in over 25 countries can now keep warm with style!
Follow us on social media:
Willheat
18028174505
willheat.cn

1
EN
Content
P. 2-3
P. 4
P. 4
P. 4
P. 4
P. 5
P. 5
P. 5
P. 6
P. 6
P. 7
P. 7
P. 7
P. 8
P. 8
P. 8
Important safety information
First use
Description of heater
Parts
Assembly
Instructions mechanical thermostat
Usage mechanical thermostat
Instructions electronic thermostat
Usage electronic thermostat
Temperature calibration
Resetting the heater
Maintenance
Warranty
Waste disposal
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Please read the instructions carefully before use.
Take good care of this manual for later use.
IN ORDER TO AVOID OVERHEATING,
DO NOT COVER THE HEATER.
STORE THIS INSTRUCTION
MANUAL FOR FUTURE USE!
NEVER TOUCH YOUR HEATER OR ITS
CASING WITH WET HANDS!
Display SG2000LED Display SG2000GLASS
ALL LANGUAGES
Display SG2000LED
willheat.cn

2
EN
You must obey common safety guidelines when using electrical
products, especially in the presence of children.
WARNING! To avoid electric shock or damage due to the
heat, always make sure the plug is pulled out before the
heater is moved or cleaned.
READ THE INSTRUCTIONS CAREFULLY
•The product is intended for home use only.
• Make sure the heater is connected to the house's regular mains
as indicated on the heater.
•
• Check for any pieces of packing foam or cardboard that may
have fallen into the heating elements of the heater. These pieces
must be removed to avoid unpleasant odors.
• Prevent the heater from overheating – do not cover.
•
long period of time.
• Pay special attention if the heater is used in rooms where
children, the handicapped or elderly reside.
• The heater should not be set up directly beneath an electrical
socket outlet.
• The cord must not be laid under any kind of carpet. Make sure the
cord is laid in such a way that nobody can trip on it.
• The heater must not be used if either the cord or plug is damaged.
or
is damaged in any other way causing it to malfunction.
• The cord must be repaired by the manufacturer or by an expert if it
has been damaged, to avoid dangerous situations.
• Avoid using extension cords, which may overheat and could
•
by making sure the air intakes are not blocked or covered. The
• The heater should not be installed in close proximity to
Important safety information

3
EN
ATTENTION! This heater is only meant to be used as a
supplementary heating source, and must not be used without
supervision
•The heater must never be used in rooms where gasoline, paint or
•Never touch an electric heater with wet hands. The heater
should be installed so a person showering or taking a bath
cannot come into direct contact with it.
•Some parts of this product can become very hot and cause
burns. Particular attention has to be given where children and
vulnerable people are present.
•
heater must cool down before it is moved.
•Avoid overloading the mains (the circuit) where the heater is
connected. The heater may overload the electrical circuit if
other electrical devices are plugged into the same socket outlet.
•Do not use this heater in small rooms when they are occupied
by persons not capable to leaving the room on their own, unless
constant supervision is provided.
•The product cannot be used by children under 8 years of age
and persons with reduced physical or mental abilities or lack
of experience and knowledge unless they have been given
supervision or instruction in the safe use of the product and
understand the hazards involved.
•Children should not play with the product. Cleaning and
maintenance should not be done by unsupervised children.
•Children under the age of 3 should be kept away from the
product, unless they are under constant supervision.
•Children aged 3 to 8 years are only permitted to turn the
product ON/OFF, assuming the heater is mounted according
to the assembly instructions and the children have received
instruction or supervision in the safe use of the product and
understand the hazards involved.
•Do not use this heater in the immediate surroundings of a bath,
a shower or a swimming pool.
willheat.cn

4
EN
First use
Description of heater
transport. Contact the retailer or importer if you discover any visible damages to the
product.
Keep the outer packaging to transport the heater in the future. If you want to dispose
the packaging, make sure it is done properly. Keep plastic bags away from children.
d period without use,
the heater can produce a burnt odor for a short time. This is normal.
Please read all the instructions carefully before use. Save the instruction manual for
future use.
Please see table above for which models that have mechanical/electronic thermostats.
Mechanical thermostat Electronic thermostat
Model Thermostat Color Amperage Power (W) Fan
SG2000MEC Mechanical White ~220-240V/50-60Hz 1800-2000W No
SG2000LED Electronic White ~220V/50Hz 2000 Yes
A B
1. Heat emission
2. Indicator
3. Thermostat
4. Output selector
5. Legs (plastic)
1. Heat emission
2. LED display
3. Thermostat + output selector
4. Fan
5. ON/OFF
6. Legs (aluminium)

5
EN
Parts
Assembly
1. Insert both legs into the brackets so you get a stable foot.
2. Remove the pre-mounted screws from the bottom of the heater and place the
heater gently on its head to mount the feet.
3. Two screws must be fastened on each foot bracket.
4. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.
1. Remove the pre-mounted screws on both legs before you insert them into the
brackets, so that you get a stable foot.
2. Attach the legs to the brackets by tightening 2 screws into each bracket.
3. Remove the pre-mounted screws from the bottom of the heater and place the
heater gently on its head to mount the feet.
4. Two screws must be fastened on each foot bracket.
5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.
Mechanical thermostat
Mechanical thermostat
Electronic thermostat
Electronic thermostat
A
A
B
B
•4 screws (pre-mounted)
•2 foot brackets
•2 rails for the feet
•8 screws (pre-mounted)
•2 foot brackets
•2 rails for the feet
Instructions mechanical thermostat
Control Panel
2. Thermostat: Adjust the desired heat setting
3. Output selector:
1. Indicator
0: OFF
I: 750W
II: 1250W
III: 2000W
WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!
ATTENTION! This heater is only meant to be used as a supplementary heating
source, and must not be used without supervision
Please see table on page 4 for which models that have mechanical/electronic thermostats
Please see table on page 4 for which models that have mechanical/electronic thermostats
Please see table on page 4 for which models that have mechanical thermostats
willheat.cn

6
EN
Control panel
1. Thermostat and output selector:
i.
to the right to increase the temperature.
ii. Push the button to change the desired power level. 3 power levels.
2. Fan ON/OFF
3. ON/OFF button
4. Power indicator — Shows whether the heater is using power or not
5. Indicates the output level
6. Indicates whether the fan is activated
7. Desired room temperature
WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!
Instructions electronic thermostat
Please see table on page 4 for which models that have electronic thermostats.
ATTENTION! This heater is only meant to be used as a supplementary heating
source, and must not be used without supervision
1. Set the output selector to the OFF position (0) and the thermostat to minimum.
Plug the heater into a grounded outlet.
2. Set the output selector to position |, || or |||. Turn the thermostat up to the maximum
position. When the desired room temperature has been reached, turn the
thermostat slowly down until you hear a click. The thermostat can now remain in
s soon as the room
temperature falls below this level, the heater will automatically switch on again.
When the room has again reached the desired temperature, the heater will switch
3. If you wish to change the room temperature, repeat the instructions in step 2.
4.
become extremely hot.
5.
Usage mechanical thermostat

7
EN
Usage electronic thermostat
1. Plug the heater into a grounded outlet.
2. Press the ON/OFF button.
3. Choose the desired power |, || or |||, by pressing the output selector. Turn the
thermostat to the desired temperature while looking at the display. As soon as the
room temperature drops below this level, the heater will automatically start again.
When the room has reached the desired temperature again, the heater will turn
4. The thermostat goes from 5 to 35°C.
5. If you want to change the temperature in the room, repeat step 3.
6. Press the fan button to start the fan. Note that the fan is only active when the
heater is heating up (when the power indicator is on).
7.
extremely hot.
8. If the temperature sensor is not functioning as it should, will be shown on
distributor or importer.
9.
for a longer period of time, pull out the plug.
Temperature calibration
It may occur deviation between the temperature registered by the heater and the
actual temperature in the room. This can be caused by several reasons, however, the
most common is that the heater is placed in a fair distance from where you usually
reside. When you set the temperature to for example 22 degrees, it is only natural that
you expect the same temperature where your sofa is placed for instance. However,
the temperature sensor is placed on the product itself, and therefore a deviation in
temperature may occur. To adjust this, all Will heaters are equipped with a calibration
function, which enables you to adjust the temperature registered by the heater. N.B!
The room must have achieved a stable temperature before any calibration.
Press and hold for 5 seconds and use + or – to set the actual temperature
Resetting the heater
main switch.
willheat.cn

8
EN
Maintenance
Warranty
Waste disposal
1. For cleaning, always unplug the heater and leave it to cool.
2. Wipe the heater regularly with a damp cloth and dry the surface before turning on
the heater again.
3. The heater must be cleaned at least once a month during the heating season.
CAUTION! The heater should never be immersed in water.
Avoid using detergents to clean the heater.
Never let any water get inside the heater; this can be hazardous.
4.
5. The heater can be stored in a dry and clean place.
6. If the heater stops working, do not attempt to repair it yourself because it can
The warranty is valid for 2 years. The heater will be repaired or replaced during
this time should any malfunction occur. The warranty applies if the heater is used
according to these instructions and the customer can present a purchase receipt. If
the heater malfunctions in any way, please contact the store where it was purchased
or the importer.
The symbol indicates that this product is not to be disposed of together with
household waste. This product must be delivered to a recycling service or container
for electrical appliances and electronic equipment. This is done to avoid health risks
and prevent harm to the environment. Local businesses (or the environmental station
in your neighborhood) are required by law to accept and recycle such products, as a
means of environmentally sound disposal.
Designed and developed by Mill International AS in Norway.
上海谧乐电器贸易有限公司
Shanghai Mill Electric Equipment Trading Co., Ltd
Room 510, Floor 5, Building 2, No.101, Zhong San Jia Li,
Chuan Chang Road, Xuhui District, Shanghai
Service phone no: 18028174505
www.willheat.cn