Williams-Sonoma Aerin Series User manual

P: 1 / 3
Aerin Wicker Mirror
Mounting Instructions
HARDWARE INCLUDED:
2 pcs 2 pcs
Hanging Orientation Options:
Mounting Instructions:
TOOLS NEEDED (not included):
1
2
Note: The provided mounting hardware is meant for
drywall and stud construction only. For other wall
types, please consult your local hardware store for
assistance in selecting the appropriate hardware.
Measure the distance between the center of the
two D-rings.
With the back of the mirror facing [e] away from the
wall, hold it against the wall at a desired mounting
location. Mark two reference points (A, B) on the
wall as shown.

P: 2 / 3
Connect the two points (A, B) with a light pencil line. Use a level to ensure that the line is level.
Make two insertion marks (C, D) centered along the line using the measurement “a”.
Use a stud-finder to determine if there is a wall stud[s] located at [each] either insertion mark.
Install the proper hardware, as shown below. Note that the head of each screw resides about 3/8” from the wall.
For stud mounting:
Tips:
The anchor is self-drillable.
No pilot hole required.
3
5
For non-stud mounting:
4

P: 3 / 3
With the help of another person, hang the Aerin wicker mirror to the wall so that the D-rings engage the screw
heads.
CARE INSTRUCTIONS:
-To clean the frame of the mirror, wipe with a soft, dry cloth. Do not use abrasive or strong chemical household
cleaners.
-A household glass cleaner may be used for the mirror surface –spray the cleaner on a clean cloth first and then use
the cloth to clean the glass.
Thank you for your purchase!
Stores | Catalog | www.williams-sonomahome.com
6