Williams-Sonoma Mercer Bed Tall King User manual


Date:20‐May‐16www.williams‐sonoma.comPage1of6
Rev: 






















Mercer Bed Tall King






Date:20‐May‐16www.williams‐sonoma.comPage2of6
Rev: 
Important Safety Instructions:
Please read all instructions carefully before assembling.
For your safety, assembly by two or more adults is strongly recommended.
Keep instructions for future use.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
Pre-assembly:
Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
Use the parts and hardware lists below to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split
wood.
Parts Included:
A1 Post 1x
A2 Post 1x
B Post 2x
C Footboard 1x
D Headboard Bottom 1x
E Side Rail 2x
F Long Stretcher 2x
G Short Stretcher 2x
H Slat 5x
I Support Leg 10x
R Headboard Top 2x
Hardware Included:
(J)
Spring Washer
(K)
Bolt
M6 x32mm
(L)
Flat Washer
(M)
Bolt
M6 x19mm
(N)
Nut (O) Flat head Bolt
M6 x12mm
44x24x54 x20 x10 x 16 x
A
1
A
2
B
B
C
D
E
E
F
F
G
G
H
I
R
R


Date:20‐May‐16www.williams‐sonoma.comPage3of6
Rev: 
Tools Required:
(P) (Q)
Wrench OpenWrench
1x 1x
Assembly Instruction Steps:
1. Attach Post (B) to Short Stretcher (G) and Footboard (C) as shown, secure the Short Stretcher (G) by using Bolt
(O), secure the Footboard (C) by using Bolt (K), Spring Washer (J) and Flat Washer (L), tighten withAllen
Wrench (P).
L
J
K
P
O
BG
C
B


Date:20‐May‐16www.williams‐sonoma.comPage4of6
Rev: 
2. Attach Post (A1&A2) to Short Stretcher (G) and Headboard (D&J) as shown, secure the Short Stretcher (G) by
using Bolt (O), secure the Headboard (D&J) by using Bolt (K), Spring Washer (J) and Flat Washer (L), tighten
with Allen Wrench (P).
3. Attach Long Stretcher (F) to the assembly as shown, insert Bolt (O) and tighten with Allen Wrench (P).
K
J
L
A2
G
O
K
A1D
G
A1
D
JL
G
A
1
O
A
2
PP
JJ
P
F
O
F
NOTE: DO NOT fully tighten the bolts in this step.


Date:20‐May‐16www.williams‐sonoma.comPage5of6
Rev: 
4. Attach Side Rail (E) to the assembly as shown, insert Bolt (K) thru Spring Washer (J) and Flat Washer (L),
tighten with Allen Wrench (P).
5. Attach Support Leg (I) to Slat (H) by using Bolt (M), Spring Washer (J) and Flat washer (L), tighten with Allen
Wrench (P).
P
L
E
E
J
K
M
J
L
P
I
H
I


Date:20‐May‐16www.williams‐sonoma.comPage6of6
Rev: 
6. Attach the Slat (H) to Side Rail (E) by using Bolt (M), Spring Washer (J), Flat Washer (L) and Nut (N), tighten
with Allen Wrench (P) and Open Wrench (Q).
Care Instructions:
Dust often using a clean, soft, dry and lint-free cloth.
Blot spills immediately and wipe with a clean, damp, cloth.
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Thankyouforyourpurchase
Stores|catalog
Finally, fully tighten all bolts with the provided Wrench, assembly is complete!
M
L
H
N
L
H
P
J
Q