Willis & Gambier Antoinette User manual

Thank you from
Willis & Gambier
For a chance to win a Love 2 Shop voucher simply posta picture of your new product on
your preferred social channels tagging Willis & Gambier using the hashtag #ShareYourStyle
and #WillisGambier . One winner will be selected at random each month.
To view our full terms and conditions pleasevisit www.willisgambier.co.uk
Are you happy with your purchase?
Yes: That’s great, we would love to hear more from you. Please leave us a review on
our social media channels.Your feedback will be greatly appreciated.
No: If for any reason there is something missing, indifferent or incorrect with your
order, please contact the retailer you purchased the item from.We will work
with the retailer to resolve your issue as quickly as possible.

3 Door Wardrobe
Step By Step Assembly Instructions
Page 1
PRE-ASSEMBLY PREPARATION
1. Please check the part contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer from
whom you bought this product.
2. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE
CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
3. This product takes approximately 90 MINUTES to assemble with 2PEOPLE.
4. The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
5. Read this leaflet in full before commencing assembly.
6. You will require a cross head screwdriver to assemble this product.
7. WE RECOMMEND that you lay a protective cloth on your carpet to prevent marking.
Antoinette Collection

Page 2
Panel and Fittings Identification
Item Description Qty.
ABase 1
Item Description Qty. Item Description Qty.
BLeft Side Panel 1CRight Side Panel 1
DCentre Upright Panel 1ETop Cornice 1FNarrow Back Panel 1
GWide Back Panel 1HWide Door Frame 1INarrow Door Frame 1
JShelf KWide Hanging Rail 3LNarrow Hanging Rail
M46
N25mm CSK Screws 27
P4
Shelf Pin
O
Drawer Frame
1
1
1
16mm CSK Screws 4
Q
30mm CSK Screws
Door KeyR2

Step 2
Page 3
Insert the drawer frame (M) into the narrow compartment of the wardrobe as
shown.
Step 1With the aid of an assistant, locate the left side panel (B), the right side panel (C) and
the centre upright panel (D) to the base unit (A), using the 30mm CSK screws (N) at
the bottom of each panel and dowels
N x 3

Step 2Insert the drawer frame (M) into the narrow compartment of the wardrobe as
shown.
Step 1With the aid of an assistant, locate the left side panel (B), the right side panel (C) and
the centre upright panel (D) to the base unit (A), using the 30mm CSK screws (N) at
the bottom of each panel and dowels
N x 3
Page 4

Step 2Insert the drawer frame (M) into the narrow compartment of the wardrobe as
shown.
Step 1With the aid of an assistant, locate the left side panel (B), the right side panel (C) and
the centre upright panel (D) to the base unit (A), using the 30mm CSK screws (N) at
the bottom of each panel and dowels
N x 3
Page 5

Step 2Insert the drawer frame (M) into the narrow compartment of the wardrobe as
shown.
Step 1With the aid of an assistant, locate the left side panel (B), the right side panel (C) and
the centre upright panel (D) to the base unit (A), using the 30mm CSK screws (N) at
the bottom of each panel and dowels
N x 3
Page 6

Step 2Insert the drawer frame (M) into the narrow compartment of the wardrobe as
shown.
Step 1With the aid of an assistant, locate the left side panel (B), the right side panel (C) and
the centre upright panel (D) to the base unit (A), using the 30mm CSK screws (N) at
the bottom of each panel and dowels
N x 3
Page 7

Step 2Insert the drawer frame (M) into the narrow compartment of the wardrobe as
shown.
Step 1With the aid of an assistant, locate the left side panel (B), the right side panel (C) and
the centre upright panel (D) to the base unit (A), using the 30mm CSK screws (N) at
the bottom of each panel and dowels
N x 3
Page 8

Step 4With the aid of an assistant, locate the cornice (E) as shown. Secure using 30mm CSK
screws (N), three for each panel and four into the top of the door frames.
N x 12
SHOWN WITH DOORS
REMOVED FOR CLARITY
OF ILLUSTRATION ONLY
Step 3IMPORTANT NOTE: PLEASE ENSURE THE DOORS ARE UNLOCKED
PRIOR TO ASSEMBLY With the aid of an assistant, locate the wide door frame
(H) onto the wardrobe and locate the narrow door frame (I) onto the wardrobe as
shown.
N x 31
SHOWN WITH DOORS
REMOVED FOR CLARITY
OF ILLUSTRATION ONLY
Page9

Step 5Before attaching the back panels
(F & G), move the wardrobe close
to the position where it will be
used. With uneven floors you may
need to lean the wardrobe slightly
left or slightly right to ensure that
the doors remain square. With the
help of an assistant, hold the
wardrobe in position and secure
the wide back panel (G) to the rear
of the wardrobe. DO NOT
SECURE TO THE CENTRE
PANEL YET. Finally, secure the
narrow back panel (F) noting that
it overlaps the wide back panel.
Tighten all 25mm CSK screws (O).
Step 6Push fit the four shelf pins (P) at the desired heights. Locate the shelf (J) noting the
'Notched' corners as shown. Screw the screws (Q) into the underside of the shelf
through the pins. Then push fit the hanging rail (K & L) to the hanging rail
supports.
SHOWN WITH DOORS
REMOVED FOR CLARITY
OF ILLUSTRATION ONLY
O x 27
Q x 4
P x 4
Page10

Step 7Move the wardrobe into position and then check that the doors are aligned correctly.
If necessary adjust the door hinges as shown below.
Page11

It may be required to adjust the top and bottom locking pins on the door frame, enabling the
hooks to locate and lock onto the pin. If required loosen and remove screws on the pin and
locate into the correct position, then re-attach the screws. The pins can be moved in the
directions shown in the diagram.
3 Door Wardrobe
Page12