Willis & Gambier Ivory SD/1367W User manual

Thank you from
Willis & Gambier
For a chance to win a Love 2 Shop voucher simply posta picture of your new product on
your preferred social channels tagging Willis & Gambier using the hashtag #ShareYourStyle
and #WillisGambier . One winner will be selected at random each month.
To view our full terms and conditions pleasevisit www.willisgambier.co.uk
Are you happy with your purchase?
Yes: That’s great, we would love to hear more from you. Please leave us a review on
our social media channels.Your feedback will be greatly appreciated.
No: If for any reason there is something missing, indifferent or incorrect with your
order, please contact the retailer you purchased the item from.We will work
with the retailer to resolve your issue as quickly as possible.

Please check the pack contents before attempting to assemble this product. A full checklist of components is given
in this leaflet. If any components are missing, please contact the retailer from whom you bought this product.
The fittings pack contains which should beSMALL ITEMS KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
You will require a crosshead screwdriver, an open ended spanner (Provided) and a 11mm spanner (Not provided)
to assemble this product.
This product is , it should be assembled as near as possible to the point of use.HEAVY TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately to assemble with45 MINUTES 2 PEOPLE.
Step By Step Assembly Instructions
1.
2.
3.
4.
5.
6.
PRE-ASSEMBLY PREPARATION
Page 1
135cm Bedstead (Product Code SD/1367W)
150cm Bedstead (Product Code SD/1369W)
180cm Bedstead (Product Code SD/1370W)
Ivory Collection

Page 2
Panel and Fittings Identification
Headboard
Centre Rail
Bracket
16mm CSK Screw 40mm Bolt 11mm Nut
Footboard
Slat
Nut & Washer
Side Rail
Thread
Open Ended
13mm Spanner
A
D
G
J
B
E
H
K
C
F
I
L
1
1
2
12
1
8
2
2
8
1
2
Item Item ItemDescription Description DescriptionQty. Qty. Qty.
A
C
D
EC
B
Plastic End Caps
M
64
135cm bedstead
150/180cm bedstead 68
32
135cm bedstead
150/180cm bedstead 34
N30mm CSK Screw 4Centre rail support leg
O1

Step
Step
- Screw the eight threads into the headboard and footboard ensuring enough of the thread is
left for attachment in steps2&3.
- Locate the side rails onto the threads protruding from the headboard. Locate the washers and
nuts onto the threads and secure by hand at first. Tighten using the open ended spanner
(Provided).
1
2
Fx8
Fittings
Fittings
Page 3
F
A
Spanner, I
H
B
C
C
Hx4

Hx4
Step - Locate the side rails onto the threads protruding from the footboard. Locate the washers and
nuts onto the threads and secure by hand at first. Tighten using the open ended spanner
3
Fittings
Page 4
Step - Attach the brackets to the headboard and footboard using the 20mm screws inserted into
the pre-drilled pilot holes. Tighten using a crosshead screwdriver.
4
Jx12
Gx2
Fittings
Spanner, I
H
G
B
J

Step 5
Fittings
Page 5
Step - Push fit two plastic caps onto either end of the slat. Push fit the slat into the pre-drilled pilot
holes. It may help to push the slat flat and lightly tap the plastic cap with a soft hammer. Repeat
this step with the remaining slats. The assembly is now complete.
6
Kx2
Lx2 D
L
K
D
E
Fittings
Mx64
135cm bedstead
150/180cm bedstead Mx68
Nx 4
Ox 1
o
- Attach the support leg (O) to the centre rail (D) using four 30mm CSK screws (N). Locate
the centre rail into the brackets. Secure using the remaining nuts and bolts. Tighten using
two 11mm spanners (Not provided).
N