Willis & Gambier Etienne ET/1598G User manual

Thank you from
Willis & Gambier
For a chance to win a Love 2 Shop voucher simply posta picture of your new product on
your preferred social channels tagging Willis & Gambier using the hashtag #ShareYourStyle
and #WillisGambier . One winner will be selected at random each month.
To view our full terms and conditions pleasevisit www.willisgambier.co.uk
Are you happy with your purchase?
Yes: That’s great, we would love to hear more from you. Please leave us a review on
our social media channels.Your feedback will be greatly appreciated.
No: If for any reason there is something missing, indifferent or incorrect with your
order, please contact the retailer you purchased the item from.We will work
with the retailer to resolve your issue as quickly as possible.

Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the retailer from whom you bought this product.The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.Read this leaflet in full before commencing assembly.You will require a crosshead screwdriver to assemble this product.WE RECOMMEND that you lay a protective cloth on your carpet to prevent marking. This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.This product takes approximately 90 MINUTES to assemble with 2 PEOPLE. Step By Step Assembly Instructions1.2.3.4.5.6.7.PRE-ASSEMBLY PREPARATIONPage 1Etienne CollectionET/1598G)Grey Double Wardrobe (Product Code

Page 2Panel and Fittings IdentificationBase UnitDoor FrameBack PanelKeyLH Side PanelHanging Rail30mm CSK ScrewsKeyRH Side PanelCorniceADGLBEHCFI11111131111ItemItemItemDescriptionDescriptionDescriptionQty.Qty.Qty.FGCBAE50mm CSK Screws6Door KeyJ1Shoe rack railKeyK21LDKKey1Shoe rail supportL4

Page 3StepIMPORTANT NOTE: PLEASE ENSURE THE DOORS ARE UNLOCKED PRIOR TO ASSEMBLY With the aid of an assistant, locate the door frame (D) onto the wardrobe as shown. First secure to the side panels using four 30mm csk screws (H) per side, inserted through the wooden blocks. Then secure at the bottom using three additional 30mm csk screws (H).2H x 11FittingsStepWith the aid of an assistant, locate the side panels (B & C) into the base unit (A). Secure using two 30mm csk screws (H), inserted through the rear posts.1H x 2FittingsSHOWN WITH DOORSREMOVED FOR CLARITYOF ILLUSTRATION ONLYPOST TOREAR!BCADH

Page 4StepStep34With the aid of an assistant, locate the cornice (F) as shown. Secure using six 50mm screws (I), three for each side panel. Secure the door frame from inside using two 30mm screws (H), inserted at an angle.Locate the hanging rail (E) into the supports as shown.Push fit the two shoe rack supports (L) in the holes. Locate the two shoe rack rails (K) into the supports.I x 6FittingsFittingsH x 2H x 16Before attaching the back panel (G), move the wardrobe close to the position where it will be used. With uneven floors you may need to lean the wardrobe slightly left or slightly right to ensure that the doors remain square. With the aid of an assistant, hold the wardrobe in position and secure the back panel to the rear of the wardrobe using sixteen 30mm csk screws (H). FHSHOWN WITH DOORSREMOVED FOR CLARITYOF ILLUSTRATION ONLYHGEJ x 1IIEKL

Vertical AdjustmentHorizontal AdjustmentLateral AdjustmentMove the wardrobe into position and then check that the doors are aligned correctly. If necessary adjust the door hinges as shown below. Step5Page 5

It may be required to adjust the top and bottom locking pins on the door frame, enabling the hooks to locate and lock onto the pin. If required loosen and remove screws on the pin and locate into the correct position, then re-attach the screws. The pins can be moved in the directions shown in the diagram.PinHookPage 6Etienne CollectionGrey Double Wardrobe (Product Code ET/1598G)