Willis & Gambier ET/1368G User manual

Thank you from
Willis & Gambier
For a chance to win a Love 2 Shop voucher simply posta picture of your new product on
your preferred social channels tagging Willis & Gambier using the hashtag #ShareYourStyle
and #WillisGambier . One winner will be selected at random each month.
To view our full terms and conditions pleasevisit www.willisgambier.co.uk
Are you happy with your purchase?
Yes: That’s great, we would love to hear more from you. Please leave us a review on
our social media channels.Your feedback will be greatly appreciated.
No: If for any reason there is something missing, indifferent or incorrect with your
order, please contact the retailer you purchased the item from.We will work
with the retailer to resolve your issue as quickly as possible.

Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the retailer from whom you bought this product.The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.Read this leaflet in full before commencing assembly.You will require a crosshead screwdriver to install this product.The instruction in this leaflet applies to a 4’6’’ headboard but the procedure is exactly the same for all sizes. This product takes approximately 20 MINUTES to install . Step By Step Assembly Instructions1.2.3.4.5.6.PRE-ASSEMBLY PREPARATIONPage 1
Grey 135cm Headboard (Product Code ET/1368G)Grey 150cm Headboard (Product Code ET/1371G)Grey 180cm Headboard (Product Code ET/1372G)Etienne Collection

Panel and Fittings Identification30mm CSK ScrewStrutHeadboardABC126ItemItemItemDescriptionDescriptionDescriptionQty.Qty.Qty.BBAPage 2

Step- To support the weight of the headboard, the struts are designed to rest on the floor. Therefore they can be attached at different heights according to the thickness of your mattress.The thinner the mattress the higher up the struts are attached.Attach struts (B) to the headboard (A) using six 30mm screws (C), in the required position.1C x 6Fittings

- Slot the headboard onto the bed base. With the headboard placed into the correct position, tighten the pins to secure.The installation is now complete.Step2