WilTec 62593 User manual

Operating Manual
Chain Hoist
62593, 62594, 62595
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps and technical data may deviate insignificantly due to continuous further
developments.

© by WilTec Wildanger Technik GmbH Item 62593–62594 Page 2
http://www.WilTec.de
http://www.aoyue.eu 05 2021-1
http://www.teichtip.de
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to
contact us briefly beforehand or to place your order via the webshop.
E-mail: [e-mail]
Phone: [phone]
Fax: [phone]
To return your goods for exchange, repair or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [email protected]o
Phone: [phone]
Fax: [phone])

© by WilTec Wildanger Technik GmbH Item 62593–62594 Page 3
http://www.WilTec.de
http://www.aoyue.eu 05 2021-1
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Figure 1 Figure 2 Figure 3
Use
This chain hoist is a highly efficient and versatile tool widely used in shipbuilding, power plants, traffic,
construction sites, mining, post offices, and telecommunications. It is suitable for installing machines or
for lifting and pulling goods. It is particularly used in narrow, open, and covered places for lifting and
pulling at any angle.
Features
The main components of this chain hoist series, made of high-quality steel, have the following features
of design and usage:
1. safe, reliable, and durable in use,
2. excellent performance and maintenance,
3. small volume, light weight, and portable size,
4. easy hand pull and high efficiency,
5. advanced structure and attractive appearance.
Construction
The chain hoist is equipped with a gearbox, a two-stage gear mechanism, and a spring clutch system.
Its main function is as follows:
Use of the free gear system
If nothing is hooked on, the selection lever (40) is on “C”(centre). The spring adjusts the load chain, so
that it is easy to pull, and the lower hook, which can be adjusted to any position.

© by WilTec Wildanger Technik GmbH Item 62593–62594 Page 4
http://www.WilTec.de
http://www.aoyue.eu 05 2021-1
http://www.teichtip.de
Lifting load
Set the adjustment lever to “UP”and turn the lever handle to the right to press the friction plates (20)
and the ratchet disc (13) firmly against the brake seat (33); then the drive shaft (11), the disc (2), the
pinion shaft (4) and the gearwheel (3) can be driven. The load chain and lever handle are used to gently
lift the load (see Fig. 1).
Instructions for use
1. Do not overload the chain hoist.
2. Do not operate the chain hoist with a motor. It is only intended for manual operation.
3. All moving parts should be well lubricated at all times.
4. Before starting up, make sure that the various parts are not damaged and that the idle is in good
condition.
5. Immediately stop operating if you suddenly need to exert more force than normal on the lever
handle. Check the following:
•Has something got stuck on the load?
•Are there any problems with parts of the block?
•Is the load heavier than the chain hoist can lift (nominal capacity)?
Technical specifications
Item number
62593
62594
62595
Max. capacity (㎏)
750
1500
3000
Chain length (m)
1.5
1.5
1.5
Load chain width (㎜)
6
8
10
Drum (without lever) (㎜)
130×120×110
170×150×140
220×180×150
Max. hook opening (㎜)
20
25
30
Inner diameter hook (㎜)
35
40
48
Weight (㎏)
6.5
11
17
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.