SAFETY INSTRUCTION
_____________________________________________________________________________________________________________________
Modified Chain Hoist –User Manual –Safety Instructions
Page 5of 16
•GENERAL SAFETY INFORMATION
The manual must be kept by a person in charge in a suitable place and ready for consultation, in
optimal conditions. Should it be lost or damaged, the manual can easily be retrieved on the
manufacturers website: www.motionlabs.com.
The manufacturer retains all material and intellectual rights on the manual, and restricts its
duplication, even partial, for any commercial use.
CAUTION
All marking data should not be removed by grinding, abrasion or peeling,
whether accidental or not. Any unit that does not carry the proper
identification references should be removed from service until those
references can be replaced.
WARNING
This equipment contains dangerous voltages and controls potentially
dangerous rotating mechanical parts. Non-compliance with or failure to
follow the instructions contained in this manual can result loss of life,
severe personal injury or serious damage to property.
•ELECTRICAL SAFETY INFORMATION
The Modified Safety Hoists operates at high voltages. There are no user serviceable parts inside the
enclosure.
DANGER
Risk of electric shock. Disconnect the power supply across all poles before
opening the equipment for access. Repairs on equipment must only be
carried out by trained NA service technicians familiar with the technical
specifications contained in this unit.
To ensure proper operation and dependability, any defective electrical component must be replaced
using parts contained in the relevant spare parts list.
•OPERATIONAL SAFETY INFORMATION
The modified safety chain hoist is provided with a full operator manual supplied by the manufacturer
of the chain hoist. This document should be read in its entirety.
