WIN Enterprises MB-80510 User manual

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
1
User Manual
Ver. Release Date Update
1.0 2013.01.31 Release
MB-80510 (SCB for PL-80510 Platform)
3.5” SBC wit onboard Intel® Atom™ processor D2550 or N2600, Intel® NM10
c ipset, DDR3 up to 4GB, 2 x Intel® Giga LAN, Onboard VGA, LVDS, HDMI,
SATA, 6 x USB, 4 x COM, GPIO, 2 x Mini-PCIe sockets, DC 8V ~ 32V input

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
2
Copyright
rademark
Limitation of liability
The content of this document and software with this product are copyrighted by WIN
Enterprises. This document contains proprietary information protected by copyright.
All rights are reserved; no part of this manual may be reproduced, copied, translated
or transmitted in any form or by any means without prior written permission of the
manufacturer.The content of this document is intended to be accurate and reliable; the
original manufacturer assumes no responsibility for any inaccuracies that may be
contained in this manual. The original manufacturer reserves the right to make
improvements to the products described in this manual at any time without prior notice
All other product names mentioned herein are used for identification purpose only and
may be trademarks and/or registered trademarks of their respective companies
While reasonable efforts have been made to ensure the accuracy of this document,
the manufacturer and distributor assume no liability resulting from errors or omissions
in this document, or from the use of the information contained herein.
For more information or other WIN products, please visit our website
http://www.win-enterprises.com.
For technical support send your inquiries to [email protected].

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
3
Packing list
Before use this product, please make sure that the following materials have been shipped.
1 x MB-80510 3.5” SBC
1 x CPU cooling Fan
1 x SATA cable, L/ 200mm
1 x 12V/5V SATA power cable , L/ 150mm
1 x COM port, DB9 type, L/ 180mm, without bracket
1 x CD Utilit
( p/n: CB-F0056-00 )
( p/n: CB-SATA11-00 )
( p/n: CB-IPOW41-00 )
( p/n: CB-ICOM34-01 )
* If any of those items are missing or damaged, please contact with sales representative or distributor
Model Name Description
MB-8051A 3.5” SBC w/ Intel® Atom™ N2600, 2 GLAN, DDR3 up to 2GB, VGA,
LVDS, HDMI, SATA, COM, Mini-PCIe, DC 8V~32V input.
MB-8051B 3.5” SBC w/ Intel® Atom™ D2550, 2 GLAN, DDR3 up to 4GB, VGA,
LVDS, HDMI, SATA, COM, Mini-PCIe, DC 8V~32V input.
p/n: CB-F0056-00 p/n: CB-SATA11-00 p/n: CB-IPOW41-00 p/n: CB-ICOM34-01

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
4
Optional Accessory
Photo Model Name
P//N:
CB-ICOM34-01
Single COM port, DB9 type, L/ 180mm, without bracket
P//N:
CB-IUSB03-00
Dual USB cable, L/ 245mm, without bracket
P//N: TBD
DC 5V output cable for SATA SSD
P//N:
CB-IPS200-00
PS/2 Keyboard & Mouse cable, L/ 150mm, without bracket
P//N:
CB-IAUD15-01
Line-out , Line-In , Mic-In audio cable, L/ 180mm, without
bracket

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
5
Safety Information
Operation Safety
To prevent electrical shock hazard, disconnect the power cable from the electrical
outlet before relocating the system.
When adding or removing devices to or from the system, ensure that the power
cables for the devices are unplugged before the signal cables are connected. If
possible, disconnect all power cables from the existing system before you add a
device.
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These
devices could interrupt the grounding circuit.
Make sure that your power supply is set to the correct voltage in your area.
If you are not sure about the voltage of the electrical outlet you are using, contact
your local power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
Before installing the motherboard and adding devices on it, carefully read all the
manuals that came with the package.
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any
area where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
6
Contents
Chapter 1
General Information ……………………………………….5
1.1 Introduction …………………………………………..……………………...8
1.2 Specifications …………………………………………………..………..…...9
1.3 Block Diagram …………………………………………….…….….............10
1.4 Board layout Dimensions ……………………………………….……………..11
1.5 IO / Connector ………………………………………………………………….13
Hardware installation …………………………………….15
2.1 The location of onboard connectors ..………………..………………….15
2.2 The location of onboard jumpers ………………………………………...17
2.3 The function list of onboard jumpers setting ……………………………18
2.3.1 JP1 for LVDS Panel Vcc select……………………………………….…...18
2.3.2 JP2 for Clear CMOS……………….…………………………………..……15
2.4 The pin define of onboard pin header ………………………….……......18
2.4.1 CN1 for Mini-PCIe WLAN/WWAN LED indicator ……………..…...........20
2.4.2 CN2 for LVDS connector ..………………………………………..….......21
2.4.3 CN3 for LVDS backlight………………………………………………........23
2.4.4 CN4 for system fan connector………………………........……………..24
2.4.5 CN5 for CPU fan connector. ……………………………………………24
2.4.6 CN6 for SATA connector & SATA power connector................................ 25
2.4.7 CN7 for Half-size Mini-PCIe socket .........................................................26
2.4.8 CN8 for audio pin header .......................................................................28
2.4.9 CN9 for DC output for HDD power connector......................................... 29
2.4.10 CN10 for USB2/3...................................................................................30
CN11 for USB4/5 …………………………………………………………….30
2.4.11 CN12 for GPIO pin header……………………......................................... 31
2.4.12 CN13 for SPI programmer ....................................................................32
2.4.13 CN14 for COM2, RS232/422/485 …………............................................ 33
2.4.14 CN15 for LPC pin header ....................................................................34
Chapter 2

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
7
Chapter 3
Programming WD & GPIO ………………………..44
3.1 GPIO DOS sample code ............……………………..……………...…..…44
3.2 WatchDog timer DOS sample code .…………………… ..……….…..…...51
2.4.15 CN16 for battery connector ......................................................................35
2.4.16 CN17 for COM3, RS232…. ......................................................................36
2.4.17 CN18 for front panel pin header ................................................................37
2.4.18 CN19 for internal 4-pin power input connector .........................................38
2.4.19 CN20 for keyboard & mouse.....................................................................39
2.4.20 CN23 for COM4, RS232…….....................................................................40
2.4.21 CN24 for COM1, RS232............................................................................41
2.4.22 CN28 for Full-size Mini-PCIe socket .........................................................42
2.4.23 CN29 for SIM card holder …………………………………………………….43

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
8
1.1 Introduction
MB-80510is a 3.5” SBC with onboard Intel® Atom™ processor N2600 or D2550 dual core processor
and Intel® NM10 express chipset. Integrated graphics for three display options include HDMI , VGA
and 18/24-bit LVDS. One DDR3 SO-DIMM supports a maximum of 4GB DDR3 800/1066 of system
memory.
There’re two flexible Mini-PCIe sockets for expansion, one is Full-size type and the other one is
half-size type. Both of them are support standard Mini-PCIe card for PCIe & USB signal-base, such as
WIFI. Besides that, A SIM card holder that could install SIM card when install a Full-size Mini-PCIe 3G
module for wireless connection. For the Half-size Mini-PCIe socket, it’s also support mSATA SSD as
storage device.
Regarding I/O ports , MB-80510provides plenty of connectivity , such as 2 x Intel® gigabit Ethernet
provided by Intel® i211AT controller, 1 x RS232/422/485 & 3 x RS232, 6 x USB2.0, HD Audio, PS/2
Keyboard/Mouse, 1 x SATA 6Gb/s, 1 x LPC pin-header that could support WIN’s TPM module if
customer need to protect information.
MB-80510that could accept wide range DC 8V ~ 32V input, a external DC locking power jack and a
4-pin internal power connector for easier power integration
MB-80510is a small form-factor embedded platform equip with Intel® Atom low power processor and
also rich IO ports, make MB-80510suitable for a wide range of applications in digital signage, POS,
kiosks, and factory automation. Fanless design are allowed for high temperature and dusty
environments
WIN offers reliable and solid products which are produced under Management System Standards:
ISO9001-2000 Certificate. The certificate keeps us focused on our quality objectives of management
and environmental production. Its willingness to customize standard products for meet unique customer
needs makes WIN different. All ODM projects are welcome. Years of experiences enables WIN to fulfill
the customer’s vision, by delivering products to exact specifications. WIN R&D team is proud of its
strong engineering background. R&D professionals account for 25% of the WIN workforce. We focus
on developing new products for both emerging and established markets
For more information about OEM/ODM, please contact us :
Email: [e-mail] TEL: [phone]

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
9
1.2 Specifications of board
Note : All specifications and p otos are subject to c ange wit out notice
Form Factor 3.5” SBC
CPU Onboard Intel® Atom N2600 / D2550 processor
Chipset Intel® NM10 chipset
Memory 1 x DDR3 204-pin SO-DIMM socket up to 4GB ( D2550 )
1 x DDR3 204-pin SO-DIMM socket up to 2GB ( N2600 )
BIOS AMI® SPI BIOS
Watchdog Timer 255 levels timer interval, (1 ~ 255 seconds), setup by software
Integrated graphic Build-in Intel® Atom graphic
VGA interface 1 x DB15 external VGA connector
LVDS interface 18/24-bit Single-channel LVDS interface (D2550)
18-bit Single-channel LVDS interface (N2600)
HDMI interface 1 x external HDMI 1.3a spec. interface
SATA interface 1 x SATAII
SSD interface 1 x Half-size Mini-PCIe socket support mSATA .
Ethernet 2 x Intel® i211AT
Audio interface 1 x Realtek ALC886 codec
Expansion interface 1 x Full-size Mini-PCIe socket w/ SIM socket ( PCIe X1 + USB2.0 signal )
1 x Half-size Mini-PCIe socket ( PCIe X1 / SATA2.0 + USB2.0 signal )
COM Internal: 3 x RS232, 1 x RS422/485 ( COM2 )
USB Internal: 4 x USB 2.0
External: 2 x USB 2.0
GPIO 8-bit programmable GPIO interface
Low Pin Count 1 x Low Pin Count ( Support AEWIN’s TPM module )
Power Input Wide range DC 8V ~ 32V input
Other Internal IO 1 x 12V/5V & 1 x 5V DC output header
1 x LVDS Voltage select,
1 x LVDS inverter,
1 x PS/2 K/M
Reset, HDD/Power LED header
Operating temperature 0°C ~ 60°C

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
10
1.3 Block Diagram
Intel® Atom Cedarview
Processor
Intel® NM10
Chipset
VGA
ALC886 HD Audio
Full-Size Mini-PCIe w/ SIM
6 x USB 2.0
1 x LPC header for
TPM ( Optional )
LPC
LPC
Fintek F81866A
1 x DDR3 204-pin SO-DIMM
PCIe
2 x Intel® i211AT
DDR3VGA
3 x RS232 + 1 x RS422/485
8-bit GPIO, PS/2 K/M
USB
1 x SATAII
SATA
PCIe
HDMI
DDI0
18/24 single channel LVDS
LVDS
BIOS
SPI
Half Mini-PCIe
PCIe/SATA
Level Shifter
HD audio
Switch
USB

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
11
1.4 Board Layout Dimensions

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
12

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
13
1.5 IO ports
Intel® Atom CPU
Intel® NM10
VGA
External DC input
w/ Locking
DC output
PS/2 Key/Mouse
Mini-PCIe
DDR3 SO-DIMM
LVDS
HDMI GLAN GLAN Dual USB 2.0
Internal DC input
Mini-PCIe SATA
Audio
4 x USB2.0
GPIO
4 x COM
SPI Flas
SIM older
Power On/Off

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
14
Dual USB 2.0
Gigabit Et ernet Gigabit Et ernet
HDMI VGA
DC input wit Locking

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
15
2.1 T e location of onboard connectors
CN27
CN26
CN2 CN3
CN13
CN6
CN9
CN1
CN7
CN21
CN22
CN8
CN15
CN18
CN24
CN12
CN14
CN17
CN23
CN20
CN25
CN10
CN11
CN5
CN4
CN16
CN19
CN32
CN28
SO-DIMM
CN29
CN31
PW1

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
16
Label Function
CN1 WLAN/WWAN LED Pin header
CN2 LVDS Pin header
CN3 Backlight Pin header
CN4 System Fan header
CN5 CPU Fan header
CN6 SATA 2.0 connector
CN7 Half-size Mini-PCIe socket
CN8 Audio Pin header
CN9 DC 5V output for SSD Pin header
CN10 USB 2.0 Pin header
CN11 USB 2.0 Pin header
CN12 8-bit GPIO Pin header
CN13 SPI Flash Pin header
CN14 COM2 / RS232/422/485 Pin header
CN15 Low Pin Count Pin header
CN16 CMOS Battery header
Label Function
CN17 COM3 / RS232 Pin header
CN18 Reset, HDD/Power LED Pin header
CN19 4-pin internal DC input connector
CN20 PS/2 Keyboard & Mouse Pin header
CN21 Gigabit Ethernet connector
CN22 Gigabit Ethernet connector
CN23 COM4 / RS232 Pin header
CN24 COM1 / RS232 Pin header
CN25 Dual USB 2.0 connector
CN26 HDMI connector
CN27 DB15 VGA connector connector
CN28 Full-size Mini-PCIe socket
CN29 SIM holder
CN30 N/A
CN31 Power On/Off switch ( N/C )
CN32 External DC input power connector

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
17
2.2 T e location of onboard jumpers
Label Function
JP1 Panel Voltage ( VCC ) select
JP2 CMOS Clear jumper
PW1 12V/5V DC output
JP5
JP1
PW1
JP2

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
18
2.3 T e function list of onboard jumper settings
- 2.3.1 : JP1 for LVDS Panel Vcc select
JP1
Closed Pin Result
1-2 * +3.3V
2-3 +5V
* Default setting
3
1
JP1

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
19
- 2.3.2 : JP2 for Clear CMOS
JP2
Closed Pin Result
1-2 * Normal
2-3 Clear CMOS
* Default setting
3
1
JP2
If you want to clean t e CMOS data, set jumper to 2-3 just for few seconds, T en,
Move t e jumper back to 1-2 pin

Custom Embedded Solutions
WIN Enterprises, Inc MB-80510 User Manual
20
2.4 T e pin definitions of onboard pin eader
- 2.4.1 : CN1 for Mini-PCIe WLAN/WWAN LED indicator
CN1: 1 x 2 eader , Pict 2.0mm
Pin Signal Pin Signal
1 LED1_WLAN 2 LED_WLAN
2
1
CN1