Windoware MOTOWARE User manual

QUICK START
GUIDE FOR
CONNECTOR
BRIDGE
MOTOWARE
MOTOWARE
MOTOWARE
motoware
MOTOWARE
MOTOWARE
MOTOWARE
BLINDS & AWNINGS
40 Parramatta Road, Underwood QLD 4119
www.windoware.com.au
1300 735 401
Setup Best Practices
• Bridge must be within signal range of both the motorized window coverings and the
Wi-Fi router.
• Wi-Fi network must be visible. (Must Select 2.4Ghz not 5Ghz)
• Environments with multiple WAPs (wireless access points) may need to temporarily
disable all but one.
• Security settings may need to be temporarily disabled. (Internet security settings may
be preventing the ridge from performing software updates –
in a commercial environment seek assistance from your IT Department).
1. Stay clear of concrete walls or corners 2. Keep away from electric appliances
BLINDS & AWNINGS

Step 1: Download the Shade Connector (Connector+) app.
You can either search the app store or scan the below QR code
(depending on your device).
Step 2: Plug the Wi-Fi bridge into a power source (5V / 1A)
Step 3: Open the Connector App on your smartphone and sign up.
Step 4: Pair the Bridge to your home Wi-FI, by following the guided instructions
in the App.
Motoware Automation Programming Instructions | Connector Bridge BLINDS & AWNINGS
The Motoware connector bridge allows you to link your motorised blinds,
curtains and awnings into your Wi-Fi network. This enables you complete control
via smart APP and communication with other IoT devices (Internet of Things).
MOTOWARE
MOTOWARE
MOTOWARE
motoware
MOTOWARE
MOTOWARE
MOTOWARE
COLOUR MEANING DURATION
Constant Blue Working fine Constant
Slow Flashing Red Wi-Fi is disconnected Continuously till status change
Slow Flashing Yellow Wi-Fi is connected Continuously till status change
Quick Flashing Red Bridge reset 5 times
Slow Flashing Purple Pairing underway Continuously till status change
Slow Flashing Green Upgrade in progress Continuously till status change
To learn more about linking up your bridge with your home Wi-Fi router,
Connector App or Connection to other IoT device scan the below QR code
or follow the “Shade Connector” Youtube channel.
To perform a factory reset, use a paperclip to press and hold the program
button until the lihght flashes quickly 5 times.
Program Button
Indicator Light
RS485 Interface
Reset
Power (5V/1A)