Wine racks America Lattice X-Cube LS-CUBE-LATT-3PC User manual

Lattice X-Cube
Assembly GUIDE
Cordless Drill
*Please verify that you have the correct number of parts before proceeding.
Depending on the model you purchased, your bundle should contain the following:
Package Contents tools for assembly
Page 1
or visit
wineracksamerica.com
Questions?
888.373.6057
WOOD SCREWS
SIDE LADDERS (X2)
TOP/BOTTOM CONNECTOR (X6)
MIDDLE "X" ASSEMBLY
Screwdriver
Rubber Mallet
Required
Suggested
SCAN FOR
ASSEMBLY VIDEO

Assembly GUIDE or visit
wineracksamerica.com
Questions?
888.373.6057
Lattice X-Cube
Page 2
1. Find an open, flat area in which to work. Carefully remove all components from the box and remove banding
with a utility knife. Check the parts list to verify package contents.
2.
Attach 3 of the Top/Bottom Connectors to the bottom of each side ladder using the provided wood screws. (figure 1)
1
SECURE BOTTOM
CONNECTORS
3. Secure the remaining 3 Top/Bottom Connectors to the top of each side ladder using the provided screws. (figure 2)
2
SECURE TOP
CONNECTORS

Assembly GUIDE or visit
wineracksamerica.com
Questions?
888.373.6057
Lattice X-Cube
Page 3
WINERACKSAMERICA.COM
360 North 700 West Suite F • North Salt Lake, UT 84054
(toll free) 888-373-6057
(fax) 801-936-0534
Once again, thank you for your business. Remember, customer
service is available to answer any questions Monday-Friday
7:00 am - 5:00 pm MST. Please feel free to contact us for any
wine storage needs.
4
INSERT X
ASSEMBLY
4. Slide the Middle “X” Assembly into the cube frame. If necessary, use a rubber mallet to tap into place.
We would love to see your wine racks in use! Please feel free to
send any photos of your racks to [email protected]
5. That’s it! Enjoy this beautiful rack with your favorite beverage. Pair with other rack styles for an ultimate cellar
storage look.