Winmate Front IP65 Display Series User manual

Please read this instructions before operating the device and retain them for future reference.
Front IP65 Display Series
5.7”~32”
User Manual
Version 1.6
Document Part No.91521110101J

2
5.7"~27" Front IP65 Display Series User Manual
Contents
PREFACE .................................................................................................................................................................3
ABOUT THIS USER MANUAL ...................................................................................................................................5
CHAPTER 1: INTRODUCTION ...................................................................................................................................6
1.1 OVERVIEW ..............................................................................................................................................................7
1.2 PRODUCT FEATURES .................................................................................................................................................7
1.3 PACKAGE CONTENTS .................................................................................................................................................7
1.4 PRODUCT OVERVIEW ................................................................................................................................................8
1.5 CONNECTOR DESCRIPTION .........................................................................................................................................9
1.6 OSD CONTROL PANEL .............................................................................................................................................10
1.6.1 OSD Control Panel Location .......................................................................................................................10
1.6.2 Control Buttons ..........................................................................................................................................10
1.6.3 Brightness Adjustment Knob .....................................................................................................................12
CHAPTER 2: INSTALLATION ................................................................................................................................... 13
2.1 WIRING REQUIREMENTS ..........................................................................................................................................14
2.2 MOUNTING GUIDE .................................................................................................................................................14
2.2.1 Panel Mount ..............................................................................................................................................14
2.2.2 VESA Mount ...............................................................................................................................................15
2.3 CABLE MOUNTING CONSIDERATIONS .........................................................................................................................16
2.4 CONNECTING POWER ..............................................................................................................................................16
2.5 CONNECTING PERIPHERALS ......................................................................................................................................17
2.5.1 VGA Connector ..........................................................................................................................................17
2.5.2 USB Connector for Touch ...........................................................................................................................17
2.5.3 HDMI Connector ........................................................................................................................................17
2.5.4 DVI Connector ............................................................................................................................................18
2.5.5 S-Video Connector .....................................................................................................................................18
2.5.6 Composite Video Connector ......................................................................................................................18
2.5.7 Display Port Connector ..............................................................................................................................19
2.5.8 RS232 Connector for Remote Control ........................................................................................................19
CHAPTER 3: OPERATING THE DEVICE .................................................................................................................... 20
3.1 TURNING ON THE SYSTEM ........................................................................................................................................21
3.2 OSD MENU NAVIGATION ........................................................................................................................................22
3.3 TROUBLESHOOTING GUIDE .......................................................................................................................................27
CHAPTER 4: TECHNOLOGY .................................................................................................................................... 28
4.1 WIDE TEMPERATURE TECHNOLOGY ...........................................................................................................................29
4.2 TRANSFLECTIVE TECHNOLOGY ...................................................................................................................................30
APPENDIX ............................................................................................................................................................. 31
APPENDIX A: RESOLUTION TABLE ....................................................................................................................................32
APPENDIX B: FREQUENCY TABLE .....................................................................................................................................32
APPENDIX C: PRODUCT DIMENSIONS ...............................................................................................................................33

3
Preface
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or
by any means, electronic or mechanical, for any purpose, without the prior written permission
of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits and/or
software described or contained in this manual in order to improve design and/or performance.
We assume no responsibility or liability for the use of the described product(s) conveys no
license or title under any patent, copyright, or masks work rights to these products, and make
no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described in this
manual are for illustration purposes only. We make no representation or guarantee that such
application will be suitable for the specified use without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material and workmanship
defects for a period of one year from the invoice date. If the customer discovers a defect, we
will, at his/her option, repair or replace the defective product at no charge to the customer,
provide it is returned during the warranty period of one year, with transportation charges
prepaid. The returned product must be properly packaged in its original packaging to obtain
warranty service. If the serial number and the product shipping data differ by over 30 days, the
in-warranty service will be made according to the shipping date. In the serial numbers the third
and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,
with A for October, B for November and C for December).
For example, the serial number 1W16Axxxxxxxx means October of year 2016.
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of
our distributor to find the update information about the product. Second, contact with your
distributor, sales representative, or our customer service center for technical support if you
need additional assistance.
You may need the following information ready before you call:
 Product serial number
 Software (OS, version, application software, etc.)
 Description of complete problem
 The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are
always ready to give advice on application requirements or specific information on the
installation and operation of any of our products.

4
5.7"~27" Front IP65 Display Series User Manual
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or
to alert you to the potential for hardware damage or personal injury. These are Notes,
Important, Cautions, and Warnings. The following is an example of each type of advisory.
Note:
A note is used to emphasize helpful information
Important:
An important note indicates information that is important for you to know.
Caution/ A Caution alert indicates potential damage to hardware and
explains how to avoid the potential problem.
Attention Unealerted’ attention indique un dommage possible à
l’équipement et explique comment éviter le problem potentiel.
Warning! An Electrical Shock Warning indicates the potential harm from
electrical hazards and how to avoid the potential problem.
Avertissement! Un Avertissement de Choc Électriqueindique le potentiel
de chocssur des emplacements électriques et comment éviterces problèmes.
Safety Information
Warning! Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while the
power is on. Sensitive electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should open the PC chassis.
Avertissement! Toujours débrancher le cordon d’alimentation du chassis
lorsque vous travaillez sur celui-ci. Ne pas brancher de connections lorsque
l’alimentation est présente. Des composantes électroniques sensibles peuvent
être endommagées par des sauts d’alimentation. Seulement du personnel
expérimenté devrait ouvrir ces chassis.
Caution Always ground yourself to remove any static charge before touching
the CPU card. Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all times. Place
all electronic components in a static-dissipative surface or static-shielded bag
when they are not in the chassis.
Attention Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements électroniques
moderns sont très sensibles aux décharges d’électricité statique. Toujours
utiliser un bracelet de mise à la terre comme précaution. Placer toutes les
composantes électroniques sur une surface conçue pour dissiper les charge,
ou dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.
Earth Ground The Protective Conductor Terminal (Earth Ground) symbol
indicates the potential risk of serious electrical shock due to improper
grounding.
Mise à la Terre Le symbole de Miseà Terre indique le risqué potential de
choc électrique grave à la terre incorrecte.

5
About This User Manual
Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep this user
manual for future reference.
 Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid
or spray detergents for cleaning. Use a damp cloth.
 For pluggable equipment, the power outlet must be installed near the equipment and
must be easily accessible.
 Keep this equipment away from humidity.
 Put this equipment on a reliable surface during installation. Dropping it or letting it fall
could cause damage.
 The openings on the enclosure are for air convection and to protect the equipment from
overheating.
 Before connecting the equipment to the power outlet make sure the voltage of the power
source is correct.
 Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
 If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over-voltage.
 Never pour any liquid into an opening. This could cause fire or electrical shock.
 Never open the equipment. For safety reasons, only qualified service personnel should
open the equipment.
 Always ground yourself to remove any static charge before touching the board. ns and
warnings on the equipment should be noted.
About This User Manual
This User Manual provides information about using the Winmate® Front IP65 Display Series.
The documentation set provides information for specific user needs, and includes:
 Front IP65 Display Series User Manual – contains detailed description on how to use
the display, its components and features.
Note:
Some pictures in this guide are samples and can differ from actual product.
Document Revision History
Version Date Note
1.0 25-Aug-2017 New document release.
1.1 22-Nov-2018 Add 24-inch display.
1.2 2-Feb-2019 Revise format.
1.3 11-Aug-2020 Revise OSD panel description.
1.4 27-Aug-2020 Standard video input change to
1 x VGA (D-sub 15), 1 x HDMI (Type-A).
1.5 11-Sep-2020 Revise resolution table, frequency table.
1.6 2-Dec-2020 Add Appendix C: Product Dimensions.

6
5.7"~27" Front IP65 Display Series User Manual
Chapter 1: Introduction
This chapter gives you product overview, describes features and
hardware specification. You will find all accessories that come
with the display device in the packing list. Mechanical dimensions
and drawings included in this chapter.

7
Chapter 1: Introduction
1.1 Overview
Congratulations on purchasing Winmate® Front IP65 Display Series. Versatile display with
panel mount mechanical design tailored for rear and VESA mounting with integrated bracket
design for industrial applications.
1.2 Product Features
Winmate® Front IP65 Display Series features:
 5.7-32” TFT LCD
 Standard 1 x VGA (D-sub 15), 1 x HDMI (Type-A)
 Front IP65 water and dust proof
 Supports VESA mount
 Transflective and wide temperature options
 Suitable for industrial applications
1.3 Package Contents
Carefully remove the box and unpack your display. Accessories may vary based on your
order .Please check if all the items listed below are inside your package. If any of the ordered
items are missing or damaged contact us immediately.
 User Manual
(Hardcopy)
 Black Screw
Bolts*
 110~240V AC
Power Adapter
 Power Cord
Part No. 91521110101J Varies by product
Varies by product
Varies by country
 VGA Cable  HDMI Cable  USB Cable  Display Port
Cable
Part No. 9441151150Q8 Part No. 94E0190190P3 Part No. 948018102100 Part No. 94E0200200K0
 RS232 Cable  DVI Cable  Audio Cable  Remote Control
Part No. 94G4094090K1 Part No. 9455295290Q0 Part No. 946020100000 Part No. 9B0000000418
*Notice: Screw bolts provided by Winmate only to be used to screw the display onto a console from the rear side.
If you prefer your own bolts, please make sure to use M4 and 30mm in length.

8
5.7"~27" Front IP65 Display Series User Manual
1.4 Product Overview
This section describes physical appearance of the Front IP65 Display Series.
Note: Notice that standard input terminals include VGA and HDMI. Your device
may be equipped with other input terminals based on your order.
Note: Notice that input and output connectors may vary by product size and
specifications. The picture above shows only a prototype model for information
purposes only. The location of OSD panel may vary by model. Refer to a product
datasheet for more details.
For product dimensions and VESA dimensions of the specific model, please refer to the
Appendix C of this user manual.
Unit: W x H x D, mm
No Item Description
1 I/O Connectors Use input/ output connectors to connect your display to external
devices such as an external PC or notebook, speaker or
headphones. Input and output connectors vary by product size and
specifications. Standard input terminals include VGA and HDMI.
Your device may be equipped with other input terminals based on
your order.
2 OSD Control
Panel
An on-screen display (OSD) is a control panel on a display allows
you to select viewing options and/or adjust components of the
display, such as brightness, contrast, and horizontal and vertical
positioning.
3 VESA Mount VESA is a standard used for mounting displays to stands or wall
mounts. VESA dimensions vary by display size.
4 Speaker The speaker generates a sound. Notice that it is an optional feature
and may not be present in your device.

9
Chapter 1: Introduction
1.5 Connector Description
Display input and output connectors are located on the bottom side. Notice that input and
output connectors may vary by product size and specifications.
Item Description
Power Jack – Connects computer to source of power.
USB for Touch - Connects USB for touch capabilities.
VGA (RGB) –Transmits video from a PC to a display.
Example: A notebook PC to a display.
HDMI –Transmits and protects copyrighted digital video and audio.
Example: An HD ready TV to a display.
DVI – Transmits video from a PC to a display.
Example: A notebook PC to a display.
Display Port – Transmits a video signal from a PC to a display.
Example: A TV to a display.
S-Video – Transmits al standard definition video, typically 480i or 576 from
a PC to a display.
Example: A TV to a display.
Composite Video (Yellow) – Transmits analog video signal from an
external PC to a display.
Example: A TV to a display.
RS232 for Remote Control –For remote control.
Example: A remote controller.
RS232 for Touch – For touch capabilities.
Example: A touch to display.
USB for Touch –For touch capabilities.
Example: A touch to display.
Audio (Green) – Transmits audio signal audio-in.
Example: A sound system to a display.

10
5.7"~27" Front IP65 Display Series User Manual
1.6 OSD Control Panel
1.6.1 OSD Control Panel Location
The location of the OSD control panel may vary by model. Please refer to product datasheet
for more details.
1.6.2 Control Buttons
OSD control panel varies by product specifications. Refer to a product datasheet to check the
OSD control panel type of a particular model.
Type A
Buttons
Icon Function
Decrease the value / Select up
Increase the value / Select down
Power switch
Select left / Exit / Auto adjustment
Select right / Call main OSD menu / Enter
LED Indicators
Description Function
Power Lights up in "Green" when the monitor turn on
Stand by Lights up in "Orange" when the device cannot detect any input source

11
Chapter 1: Introduction
Type B
Buttons
Icon Function
Decrease the value / Select up
Increase the value / Select down
Power switch
Auto
Select left / Exit / Auto adjustment
Menu
Select right / Call main OSD menu / Enter
LED Indicators
Icon Description Function
Power Lights up in "Green" when the monitor turn on
Stand by Lights up in "Orange" when the device cannot detect any input
source.
Type C
Buttons
Icon Function
POWER Power switch
UP Select up
DOWN Select down
MENU/
ENTER
Call main OSD menu/ Enter
LEFT Select left / Decrease the value
RIGHT Select right / Increase the value / Source
PIP/ EXIT Opens PIP/ Exit
SWAP/
AUTO
PIP SWAP/ AUTO adjustment

12
5.7"~27" Front IP65 Display Series User Manual
LED Indicators
Description Function
Power Lights up in "Green" when the monitor turn on
Stand by Lights up in "Orange" when the device cannot detect any input source
Type D
Buttons
Icon Function
PIP
Exit / PIP
AUTO
PIP SWAP/ AUTO adjustment
Select left / Decrease the value
SOURCE
Select right / Increase the value / Source
MENU
Enter / Call main OSD menu
Select down
Select up
Power switch
LED Indicators
Description Function
Power Lights up in "Green" when the monitor turn on
Stand by Lights up in "Orange" when the device cannot detect any input source
1.6.3 Brightness Adjustment Knob
Brightness adjustment knob is located on the OSD control panel the rear side of the display.

13
Chapter 2: Installation
Chapter 2: Installation
This chapter provides hardware installation instructions and
mounting guide for all available mounting options. Pay attention
to cautions and warning to avoid any damages

14
5.7"~27" Front IP65 Display Series User Manual
2.1 Wiring Requirements
The following common safety precautions should be observed before installing any electronic
device:
 Strive to use separate, non-intersecting paths to route power and networking wires. If
power wiring and device wiring paths must cross make sure the wires are perpendicular
at the intersection point.
 Keep the wires separated according to interface. The rule of thumb is that wiring that
shares similar electrical characteristics may be bundled together.
 Do not bundle input wiring with output wiring. Keep them separate.
 When necessary, it is strongly advised that you label wiring to all devices in the system.
 Do not run signal or communication wiring and power wiring in the same conduit. To
avoid interference, wires with different signal characteristics (i.e., different interfaces)
should be routed separately.
 Be sure to disconnect the power cord before installing and/or wiring your device.
 Verify the maximum possible current for each wire gauge, especially for the power cords.
Observe all electrical codes dictating the maximum current allowable for each wire
gauge.
 If the current goes above the maximum ratings, the wiring could overheat, causing
serious damage to your equipment.
Be careful when handling the unit. When the unit is plugged in, the internal components
generate a lot of heat which may leave the outer casing too hot to touch.
2.2 Mounting Guide
The Front IP65 Display Series can be applied for several different installation methods,
including panel mount, VESA mount. Refer to sub-sections below for more details.
Caution Follow mounting instructions and use recommended mounting
hardware to avoid the risk of injury.
Attention Suivez les instructions de montage et d'utilisation recommandé
le matériel de montage pour éviter le risque de blessure.
2.2.1 Panel Mount
The Front IP65 Display Series comes with clamp mounts that enable you to install the unit onto
a wall (where space has been cut out to accommodate the rest of the hardware). Winmate
provides VESA by request.
Installation Instruction
1. Make a cutout on the fixture (ex. wall) according to the cutout dimension of the display.
Note: All installation processes will be done from the rear side of the fixture.
2. Based on the drawing mark screw holes on a rear side of the fixture. Place the display
on the fixture from the front side. The sides of the bezel should be visible from outside.
3. Use electric screwdriver to fasten M4 screws from the rear side of IP65 front bezel.
4. You complete the installation. Please connect all the peripherals if needed.

15
Chapter 2: Installation
❶ ❷
❸ ❹
2.2.2 VESA Mount
Front IP65 Display Series comes with VESA Mount holes for mounting.
Installation Instruction:
1. Screw VESA bracket to the fixture (ex. swing arm) with four VESA screws.
2. Place the device on VESA bracket.

16
5.7"~27" Front IP65 Display Series User Manual
Notice that VESA stand and mounting kit are not provided by Winmate.
2.3 Cable Mounting Considerations
For a nice look and safe installation, make sure cables are neatly hidden behind the device.
Caution Observe all local installation requirements for connection cable type and
protection level.
Attention Suivre tous les règlements locaux d’installations, de câblage et
niveaux de protection.
Caution Turn off the device and disconnect other peripherals before installation.
Attention Éteindre l’appareil et débrancher tous les périphériques avant
l’installation.
2.4 Connecting Power
This section provides information on how to use connectors on the Front IP65 Display Series.
Be cautious while working with these modules. Please carefully read the content of this
chapter in order to avoid any damages.
Installation instruction:
1. Connect the AC cord to the AC IN terminal on the AC adaptor.
2. Connect the DC OUT terminal of the AC adaptor to the DC IN terminal on the monitor.
3. Align the notch on the cord connector with the guiding groove and plug it in.
4. Connect the AC cord plug to the power outlet.
Notice that the type of connector varies based on your order.

17
Chapter 2: Installation
2.5 Connecting Peripherals
The panel control port is designed for monitors that work with a variety of compatible video
sources. Due to the possible deviations between these signal sources, you may have to make
adjustments to the monitor settings from the OSD menu when switching between these
sources.
2.5.1 VGA Connector
The Chassis Display Series uses standard 15pin D-sub connector. Plug 15-pin VGA signal
cable to the VGA connector in the rear of motherboard, and plug the other end to the monitor.
Secure cable connectors with hexagonal copper pillars M3x4mm.
Pin assignment and signal names of VGA connector
2.5.2 USB Connector for Touch
Use USB connector for touch capabilities.
Pin assignment and signal names of USB connector for touch
2.5.3 HDMI Connector
Plug HDMI signal cable to the HDMI connector on the rear side of PC system, and plug the
other end to the monitor.
Pin assignment and signal names of HDMI connector
Pin №
Signal Name
Pin №
Signal Name
1
RED
2
GREEN
3
BLUE
4
NC
5
GND
6
AGND
7
AGND
8
AGND
9
VGA_5V
10
GND
11
NC
12
DDCSDA
13
H Sync
14
V Sync
15
DDCSCL
Pin No.
Signal Name Pin No. Signal Name
1 +5V 2 Data-
3
Data+
4
GND
Pin №
Signal Name
Pin №
Signal Name
1
HDMI_RX2+
2
GND
3
HDMI_RX2-
4
HDMI_RX1+
5
GND
6
HDMI_RX1-
7
HDMI_RX0+
8
GND
9
HDMI_RX0-
10
HDMI_RXC+
11
GND
12
HDMI_RXC-
13
HDMI_CON_CEC
14
NC
15
HDMI_CON_SCL
16
HDMI_CON_SDA
17
GND
18
+5V_HDMI
19
HDMI_CON_HP

18
5.7"~27" Front IP65 Display Series User Manual
2.5.4 DVI Connector
Use DVI cable to connect your TFT LCD display to the external PC system. Fasten cable
connectors with screws.
Pin assignment and signal names of DVI connector
2.5.5 S-Video Connector
Use Mini-DIN connector to connect S-Video to the display.
Pin assignment and signal names of S-Video connector
2.5.6 Composite Video Connector
Use composite video cable to connect composite video input.
Pin assignment and signal names for Composite Video connector
Pin № Signal Name Pin № Signal Name
1 TMDS2- 2 TMDS2+
3
GND
4
TMDS 4-
5
TMDS4+
6
DVI_SCL
7
DVI SDA
8
NC
9 TMDS1- 10 DVI_RX1+
11
GND
12
TMDS 3-
13
TMDS3+
14
+5V
15
GND
16
DVI_CON_HP
17 TMDS0- 18 TMDS0+
19
GND
20
TMDS5-
21
TMDS5+
22
GND
23
DVI_CLKP
24
DVI_CLKN
C1
NC
C2
NC
C3
NC
C4
NC
C5
NC
Pin № Signal Name Pin № Signal Name
1 GND 2 GND
3
Y
4
C
Pin №
Signal Name
Pin №
Signal Name
1 Composite Video
Signal
2 GND

19
Chapter 2: Installation
2.5.7 Display Port Connector
Use Display Port cable to connect your TFT LCD display to the external PC system.
Pin assignment and signal name of Display Port connector
2.5.8 RS232 Connector for Remote Control
Use RS232 cable to connect your TFT LCD display to remote control.
Pin assignment and signal name of RS-232 connector for remote control
Pin No. Signal Name Pin No. Signal Name
1 Lane 0 P 2 GND
3
Lane 0 N
4
Lane 1 P
5
GND
6
Lane 1 N
7
Lane 2 P
8
GND
9 Lane 2 N 10 Lane 3 P
11 GND 12 Lane 3 N
13
GND
14
GND
15
AUX P
16
GND
17 AUX N 18 Hot Plug
19
Return
20
DP_PWR
Pin No. Signal Name Signal Name
1
DCD
NC (no connection)
2
RXD
Reception data
3 TXD Transmission data
4
DTR
Data terminal ready
5 GND GND
6
DSR
Data set ready
7 RTS Request to send
8
CTS
Short circuit at pin 7 on the display
9 RI NC (no connection)

20
5.7"~27" Front IP65 Display Series User Manual
Chapter 3: Operating the Device
In this chapter you will find instructions on how to operate the
display.