WinsTouch BVR-120 User manual

1
BVR-120 User Manual for Sport/Bike/Motorcycle
Smart Camera Recorder (Wi-Fi & GPS Logger)
Specification
Item
Specification
Dimension
80*32*32mm
Camera
Sony Exm
o
r CMOS sensor
C
amera
R
esolution
FHD 1080P
(1920*1080
)
Video Frequency
30fps
Recording Format
H.264
Glass Lens
f1.8
Waterproof
IPX5
F
ield of
V
iew
120
˚
Storage
Micro SDHC 4GB~
128
GB
(FAT32 file format)
iOS and Android APP
iOS App
、
Android App
Wi-Fi
Wi
-
Fi video streaming
Real time clock auto calibration while Wi-Fi
connection
Support GPS Logger
Log GPS location into the recording video
from
S
mart
P
hone
GPS
Seamless
L
oop
R
ecording
F
iles overlap for 1 second
Power
Built
-
in rechargeable battery for 100
minutes battery life
or
External power bank 5V power supply
Product Outlook
Instruction for Use
 Press & hold for a few seconds the power button to start recording automatically
after booting(Need to install memory card). At this time, the blue LED of the
BVR-120 should be “ON” and start blinking to start recording.
 Press & hold for a few seconds the power button to pause/start recording, and
(press & hold) for a few seconds to end the recording and shut down.
 Blue LED flashing quickly indicates an error; check the Memory Card is properly
inserted or reformat the Memory Card.
Rear View
2
 Red LED flashes indicates the battery level is low, re-charge or connect to the
“Waterproof USB Charger-on-the Go” to the powerbank (Not included).
 Cover & lock the “Waterproof USB Charger-on-the Go” and connect the USB cable
to the powerbank for continuous recordings.
 Green LED indicates Wi-Fi is “ON”. Blue LED will change to Green.
LED Indicator Status Description
Red
On
Charging
Flashing
1.
Battery low
(
Slow flash
-
interval is about 2.5
seconds
)
.
It means 10 mins recordable.
2.When the device is turned on each time, the red
LED flashes to indicate the power status:
a.Flashes once mean 10 ~ 30 mins recordable.
b.Flashes twice mean 30 ~ 60 mins recordable.
c.
Flashes
th
rice
mean
60
~
90
mins
recordable.
Off
F
ull
y
Charg
ed
(external power) / off
Blue
When Wi-Fi is ON, the
Blue LED will change
to Green
On
Power
ON
,
but not recording
.
Flashing
1.
Recording
(
While recording
it
flashes
)
2.Error/Memory Card not detected(After 3 seconds it
flashes and shuts down)
Off
Power off
Purple On
1.
The storage device is connected to the computer
successfully.
2.
Power on without charging
.
Flashing
Recording while charging
Off
Power off
 The recordable time varies with the
capacity of the memory card, please
refer to the table on the right:
Safety Reminder
 There is a Microphone hole on the side of the device. Do not intrude with any
sharp objects or else it will damage the waterproof.
 To avoid the moisture in the air to defect the device, it’s recommended to perform
dehumidification on the device regularly each month, you can put the device in
the moisture-proof box or next to your dehumidifier.
Memory Card Size
Recordable Time
8G
1
Hr.20Mins.
16G
2
Hr.
4
0Mins.
32G
5
Hr.20Mins.
Align the marker of the waterproof cover with the
marker on the BVR-120, cover and press to the
bottom, and turn the waterproof cover clockwise to
the bottom to supply power.
M
arker
“Optional Accessories - Not included”

3
 It’s recommended to use Class 10 and above Micro SD from well-known brands,
also please prepare one dedicated SD Card for one device to avoid data loss and
errors.
 Due to Loop Video Recording function on the device, the memory card will Over
Write and Delete file repeatedly, it’s recommended to format the memory card
regularly each month to ensure memory card’s reliability.
 If you use a 64G or 128G SD card, please use the formatting software on your
computer to reformat to FAT32.
 If there is any abnormality, crash, or abnormal light during use, please press the
reset button on the back of the recorder, the recorder will shut down, and normal
operation can be resumed at this time.
APP Operation
 Download and Setup “WinCam“APP.
 Connection settings
1. Switch “ON” BVR-120 power and then launch the WinCam App. “ ”.
2. Tap Search icon “ ” and find BVR-120 device in the scanning list, then tap
BVR-120 to start the connection.
3. If can’t find BVR-120 device, re-click the Searching icon “ ”.
4. Tap “ “ icon to set Wi-Fi connection, select the SSID name“BVR-120” and input the
Password “00000000”.After settings return to the WinCam App.
iOS
(
Method
1)
G
o
to
APP Store
and
download the “WinCam” APP.
(Method
2)Scan the QR Code
Android
(
Method
1)
G
o to
the
Google Play
store
and download the “WinCam” APP.
(Method 2)Scan the QR Code
Searching…
Searching Result
My
D
evice
BVR-120_001
Searching
My Connected Device
BVR-120_001
Searching Result
BVR-120_001
SSID
& Password
4
Note：
 When Wi-Fi is connected on the BVR-120, Smartphone can’t be connected
to the Internet. When operation is over, please disconnect.
 Preview Live screen uses wireless transmission. Normal for the screen to
be delayed from the real scene.
 When the video in the BVR-120 is played in real-time, it is transmitted via
Wi-Fi wirelessly. This may take a few minutes.
 Operating instructions
Refresh
Setting
File management
Media
File
GPS logger
Log GPS location
Playback the downloaded
video.