Wintal PDVD20HD User manual

PROGRESSIVE SCAN
HDMI DVD PLAYER
WITH USB PLAYBACK
USER MANUAL
576P |720P |1080i HD

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. SERVICING THE
UNIT MUST ONLY BE CARRIED OUT BY QUALIFIED SERVICE PERSONNEL.
The lightning ash with arrowhead symbol within the equilateral triangle is to alert
the user to the presence of dangerous voltages inside that may be of sucient
magnitude to constitute a risk of severe electric shock.
The exclamation point within the equilateral triangle is to alert the user of the
presence of important operating and maintenance (servicing) Instructions in the
literature accompanying the appliance.
Laser product symbol: located on the rear panel of the unit, indicates this player is a class 1 laser
product, only use weak laser and non hazardous radiation outside of the unit.
Please read through this instruction manual before installation and use.1.
Do not touch the power plug with wet hands.2.
Switch o the main power when the unit is not in use. (Disconnect the power plug from3.
the power outlet when you do not intend to use the unit for a prolonged period of time.)
Before moving the unit, remove the disc from the tray.
Do not open the cover, service can only be carried out by a qualied technician.4.
To avoid damage the unit, do not expose the unit to moist and humid conditions or operate5.
it in direct sunlight or place it near objects that radiate heat.
Operate the unit on a at surface and in a well ventilated area. Ensure the ventilation holes6.
are not covered to avoid overheating and malfunction.
Clean the front panel and case with soft cloth only, do not apply any kind of chemicals7.
thinners, or sprays.
The unit must not be exposed to water spills, dripping or splashing, do not place objects8.
lled with liquids such as vases that may be knocked over on the unit.
To avoid damage from mains voltage surges or spikes unplug the unit when it wont be9.
used for a long period of time .
DOLBY PRO LOGIC:
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

CONTENTS
Precautions .................................................................................................................................... 1
Front and rear panel illustration............................................................................................. 2
Remote Control............................................................................................................................ 3
Connections .................................................................................................................................. 4
Function Operation .................................................................................................................... 7
Cd & mp3 playing...................................................................................................................... 11
Kodak picture cd playback..................................................................................................... 11
System Setup .............................................................................................................................. 12
Troubleshooting ........................................................................................................................ 18
Technical Specications ..........................................................................................................20

1
1. PRECAUTIONS
Before using this unit, be sure to read the applicable items of the operating instructions and
the safety precautions carefully.
Keep the instruction manual handy for future reference.
Safety
Power Source-The unit should only be connected to the mains power supply as described In the
operating instructions or as marked on the unit.
Environment
Water and moisture do not use this unit near water.1.
For example, near a bathtub, wash bowl, swimming pool, or the like, Damp basements
should also be avoided.
Condensation-moisture may form on the lens In the following conditions:2.
Immediately after a heater has been turned on.
In a steamy or very humid room.
When the unit Is suddenly moved from a cold environment to a warm one. If moisture
forms Inside this unit it may not operate properly, to correct this problem wait about one
hour for the moisture to evaporate.
Never use or place this unit near a heat source.3.
Do not leave It In an automobile exposed to direct sun light for a long period of time or
with the doors and windows closed as excessive heat may deform the cabinet.

2
2. FRONT PANEL AND REAR PANEL ILLUSTRATION
Front panel
12 3456 7
8
Rear panel
9 75 861 2 3 4

3
3. REMOTE CONTROL
1
4
3
2
5
6
7
9
11
19
8
10
12
13
14
15
16
17
18
20
22
23
24
25
26
27
28
29
30
1. STANDBY
2. MUTE
3. OSD
4. A-B REPEAT
5. REPEAT
6. MENU/PBC
7. UP/DOWN/
LEFT/RIGHT
8. ENTER
9. SLOW
10. PLAY/PAUSE
11. PREVIOUS/NEXT
12. STOP
13. PROGRAM
14. AUDIO
15. RETURN
16. ANGLE
17. V-MODE
18. HDMI
19. OPEN/CLOSE
20. NUMBER BUTTONS
21.CLEAR
22. GOTO
23.SETUP
24. STEP
25.FAST REVERSE/
FAST/FORWARD
26. P/N
27. ZOOM
28. SUB-T
29.TITLE
30. VOLUME -/+
21
Using the Remote Control
Unless stated other wise, the remote control can operate all the features of the DVD Player,
Always point the remote control directly at the remote sensor on the front of the DVD Player, not
at the TV.
Battery Installation
To remove the battery compartment lid on the rear of the remote control slide it down then lift
it o.
> Fit two AAA batteries inside the battery compartment as indicated.
> Do not mix old and new batteries or dierent types of batteries
> Replace the battery compartment lid. Slide the lid until you hear it click into place.

4
4. CONNECTIONS
Turn o the power before connection.
•Turn on the power after nishing connection.
Plugs and cables must be rmly connected; ensuring
plugs are fully inserted.
DVD+TV
Notes :
Connection options between the player AV output and the TV are as follows:
Composite video cable and left/right audio cable, this is the most common and simplest•
analogue connection, but oers the lowest quality picture.
S-video cable and left/right audio cable, oers better• analogue picture quality than
composite (set the video type to component)
Component video cable and left/right audio cable oers the best• analogue picture quality
(set the video type to component, if you connecting a progressive scan TV set, please set
the video type to P-Scan)
HDMI cable oers the best available• digital picture and audio quality
(press V-MODE button to switch video modes from Component, P-Scan, HD, set the video
out to HD)
To Y video input
To CB/PB video input
To CR/PR video input
To Y video output
To CB/PB video output
To CR/PR video output
To HDMI input
Connecting to TVs 1. with HDMI Cable, 2. YUV with Component cable HD mode
Connecting to a TV with Audio/Video cable
To video input(yellow)
To audio inputs(red, white)
To S-video input
To S-video output
If the TV has an S-video input, connect the DVD player with an S-video cable when using an
S-video cable, do not connect the yellow video cable.

5
Connecting to a audio system and TV equipped with YUV video input
To audio inputs of the amplifier
To Y video input
To CB/PB video input
To CR/PR video input
To Y video output To CB/PB video output To CR/PR video output
The setup by default of this player is CVBS output, to change to HDMI or other, go to setting on
the SETUP MENU.
DVD+AV Amplier: Notes:
There are the following ways of connecting the player with amplier:
1. Coaxial audio output
2. Left/right audio output
Connecting to an amplier equipped with a digital audio input and TV
To Y video input
To CB/PB video input
To CR/PR video input
To Y video output To CB/PB video output To CR/PR video output
To OPTICAL
type digital
audio input
Connect either
Optical digital cable
Coaxial cable
To COAXIAL
type digital
audio input
Connecting to an amplier equipped with 5.1ch audio input and TV
To 5.1ch audio inputs To 5.1ch
audio outputs
To video input
FLFR
SUB CEN
SL SR
Audio cable
SL SR
SUBCEN
FLFR

6
Warning:
Do not connect any amplier with coaxial connector that does not contain Dolby digital AC 3 or
DTS decoder. Any attempt to do so and play of DVD disc will result in damaging your speakers
and causing possible hearing injury. Other than DVD disc, VCD and CD can be operated normally
without conforming to the above restriction.
Setting of TV system
If you nd the picture not properly zoomed, brim picture covered or black & white picture etc,
please select PAL or NTSC by systems setting or press N/P button to switch the TV system on the
remote control. This DVD disc is capable of supporting dierent aspect ratios, as a result, non-
full zoomed picture could appear or picture be partially covered on users TV set.

7
5. FUNCTION OPERATION
Function Buttons On the Front Panel
These buttons function in the same way as the corresponding buttons on the remote control.
For the detail information, please see the following texts.
Function Buttons On the Remote Control
STANDBY
Press the button once and the player will go into standby state. Press the button again and the
player will resume operating as before.
0-9 keys
These keys are used to input the time, as well as title, chapter and track numbers. When a
numeric item is displayed on the screen, press the 0-9 keys to select the desired entry, and press
ENTER to conrm.
When a CD or VCD is playing (with PBC o), press the 0-9 keys to select a track directly, then
press ENTER to conrm.
NEXT
During DVD, CD or VCD playback, press NEXT to play the next chapter, title or track.
PREV
During DVD, CD or VCD playback, press PREV to play the previous chapter, title or track.
STOP
Press the button once and the player will be in memory stop state. Press this button twice and
the player will be in complete stop state.
SETUP
Press the button to enter the system setting menu, press the button again to exit the menu.
MENU
During DVD playback, press MENU to display the disc menu of the current title. Note: This
function is subject to the disc
PBC
During VCD/SVCD playback, Press PBC to select the mode of PBC On or PBC O.