WinterJoy 504-637 User manual
INFLATING AND ASSEMBLY INSTRUCTIONS
INFLATING AND ASSEMBLY INSTRUCTIONS
1. Remove all content from packaging. Lay out the
deated product on a large clear surface.
2. Hold the product upright. Make sure the air
intake opening on the unit is clear of any fabric
obstruction and that the zippers are fully closed
(See Illustration 1).
3. Plug the AC adapter power cord to an outlet and
connect the inator fan to the product to initiate
inating process.
IMPORTANT NOTE: the inator fan must be plugged
in to a power source at all times in order for your
product to remain inated.
4. Once fully inated, clip the black tethers to each of
the nylon loops located on the side of the inatable
(See Illustration 2).
5. Insert the plastic stakes into the ground and tie the
black tethers to the metal stakes (see illustration 3).
6. Enjoy your WinterJoy inatable!
1
2
3
DEFLATING INSTRUCTIONS
To deate your product, simply unplug the AC adapter power cord to stop the inator fan.
For faster deation, unzip the zipper located at the bottom of the inatable after you have
disconnected the Ac adapter power cord and the fan has been completely turned off.
NOTE:
Do not unplug by pulling abruptly on the cord.
1-YEAR LIMITED MANUFACTURER’S WARRANTY
Your WinterJoy product is backed by a one-year limited manufacturer’s warranty. For
a period of one year following date of purchase, WinterJoy will repair or replace your
product should it fail due to a manufacturer’s defect (subject to certain limitations such
as, but not limited to, use of the product as directed or performing the intended function
during which the product may become damaged).
This one-year limited warranty does not cover any damage that results from
unauthorized or improper use, service, or repair. Further, it does not cover damage
caused by accident, negligence, purposeful harm, or normal wear and tear. Should you
discover your WinterJoy product is not functioning properly, please send your product
to our repair center for evaluation, at the address listed below. If your product cannot be
repaired or serviced, we reserve the right to exchange it for a similar or newer model.
Please note that a at processing fee of $15.00 will be charged to cover the service
evaluation and return shipping of your product. All limited warranty claims must be
accompanied by a copy of your proof of purchase from an authorized retailer. Please
send your product, proof of purchase, and a check or money order in the amount of
$15.00 made out to WinterJoy to:
Address: Contact:
WinterJoy Appliances [email protected]
3069 Taft Street
Hollywood, FL 33021
By purchasing this product and/or utilizing this limited warranty, you expressly waive the
right to be a member of or the lead plaintiff in any class action or any group civil action
against the manufacturer and agree that any dispute involving WinterJoy shall be
resolved in Broward County, Florida as the exclusive jurisdiction in any court case and/or
proceeding.
Table of contents
