WINYCAM Winner User manual

During recording, the product may be affected by wireless devices such as radio frequency,
DMB signal, remote start device, remote controller etc. Install as far away from the antenna
and antenna cable as possible; and when cabling or tidying up cables, please avoiding the cables to be duplicated.
Winner Quick Guide Installation
Package
1. Please check any defects on the product before installation. We are not responsible for any cost or expense
incurred, as a result of the failure to check before installation.
2. If the constant power discharge protection function is set ‘ON’, motion detection will work as parking
REC mode. If the car battery voltage becomes lower than setting value of cut off voltage, a recording will
stop even parking REC mode.
3. Below table is Recordable Time by “SD card Folder Capacity Adjustment”and“Video Quality”based on the
default setting.
4. A Micro SD card is consumable goods. Aged SD card may cause REC error. Please replace the periodically.
(In general, the warranty period for a Micro SD card for car recorder is 6 months.)
5. When an accident occurred, please power off the product, remove the Micro SD card and save the accident
file on your PC. If long time passed after accident and the file will be deleted, we are not responsible for
missing the file.
By time: When the memory is full, the oldest file will be automatically deleted.
By mode: Total record files are stored by your setting rate on “SD card Folder Capacity Adjustment”.
When memory is full on a particular recording mode, the oldest file will be automatically deleted on
particular recording mode. Stored file may also be deleted.
GPS module may be affected by main body or by other electronic devices if it is too close each other.
Keep a distance as much as possible.
The receiving signal may become poor depending on the climate, satellite status and geography in the neighborhood.
The receiving signal may become poor if the windshield is heavy sun-coated or fixed with metallic materials.
Rear Camera Power Cable for
rear camera
Cigar Lighter
Micro SD Card SD Card Adaptor
Video Splitter Cable
(Y-Type)
GPS Module Fuse Cable
Bracket
Winner
Option
Please read below introduction carefully before using. Front Camera Installation
External GPS Module Installation
TV-OUT Cable Installation
Rear Camera Installation
1. Insert Micro SD card
to Winner SD card
slot. (Check the
SD card direction)
2.Remove a protect
sticker on Bracket.
3.Connect Cigar
lighter cable to
Power connection
of product.
4. Attach the Winner
in place on the top
of front windshield
or middle o left and
right of the mirror.
5.Connect a Cigar
Lighter to a Cigar
Socket
6.Arrange a power
cable.
1. Please power off a car and
Winner before installation.
N(Normal),
M(Reverse of Left, Right)
The default is N(Normal).
Please power off Winner
When flip on switch.
2. Remove a protect
sticker and attach
a camera in place.
3. Adjust a camera
angle and fix it.
(To adjust the angle,
the horizon is seen
above the right
center of the screen.)
5. Power on Winner
and check to
playback a REC
video correctly.
6.
Arrange a power cable
with cable clip.
(When put cable on
the wall, please note
a PLAY cable is not
damaged.)
When use the Fuse cable, and insert it to exact Fuse terminal.
(Some Fuse is different depend of the type of car.)
When connecting to your Car Navigation, you need an applied Car Navigation video cable. With a specific Car
Navigation, installation may be restricted, and/or extra service charge may be incurred.
Connect an external
GPS module to a GPS
terminal on the main body.
Fix an external GPS module
at a well visible place, and tidy
up a cable.
Connect a video Splitter
cable(Y-Type) to a TV-Out
terminal on a main body.
Video Splitter cable(Y-Type)
Connect TV-Out terminal
TV-Out signal line
Rear camera connection cable
(Unit : Minute)
CH
1CH
2CH
Video
QualityCamera
16GB 32GB
Super HighFront
HighFront
Normal Front
Super HighFront/Rear
HighFront/Rear
Normal Front/Rear
Normal
(50%) Normal (50%)
Motion
(20%) Motion (20%)
Event
(30%) Event (30%)
96 19639 7858 117
118 23947 9671 143
151 30761 12391 184
62 12725 5137 76
76 15430 6145 92
96 19639 7858 117
4. Connect the
( ㅡ ) shape’s rear
camera cable to a rear
camera connection slot
and the ( ㄱ ) shape’s
one to a main body.
USB Card Reader

Customer Service
Manufacture : B-110, 40, Imi-ro, Uiwang-si,
Gyeonggi-do, 16006, Rep of Korea
Please download the user manual, program from
below website
http://winycam.com
CONBUZZ Co., Ltd
Format a Micro SD Card on a device. (Menu > Others > SD Card Format)
※ GPS Icon : GPS Icon : w/o GPS : Grey, w/ GPS : white
LED Operating Guide
Configuration Product Parts
Micro SD Card Format
To set car constant power discharge protection function
Firmware Upgrade
This device has the built-in car constant power
discharge protection function, and therefore does
not require an extra device to cut off constant power.
With the configuration on LCD or PC Viewer program,
you can set the Cut Off Voltage for the
constant-power-off function.
1. Configuration
Menu > System Set > Cut Off Voltage
2. PC Viewer Program
Configuration > Breaking Voltage There are some
differences depend on a type of car and car age.
(Cut off Voltage : 11.4(23.1) / 11.6 (23.4) /
11.8(23.7) / 12.0(24.0) / 12.2(24.3) / Off)
Format on Winner
Auto Firmware Upgrade
1) Remove a Micro SD card from the device while Power is off.
2) Connect it to PC to back up the stored REC files onto PC.
3) Go to the web site (http://winycam-eng.com) and download a new
firmware onto the memory card.
4) Insert a Micro SD memory card into the device, turn on a power and
a automatic upgrade will begin.
5) During the upgrade, the upgrade status will be shown on a LCD and
voice guidance will be announced.
6) Once upgrade completed, the device will be initialized and voice
guidance will be announced.
OFF
Item CH Front LED
Rear LED
GPS LED
GPS Connection
Receiving GPS Signal
Not receiving GPS Signal
REC LED Normal
(NO GPS)
Booting-
-
1CH
1CH
1CH
1CH
2CH
2CH
2CH
2CH
-
ON
ON
Red ON
Red ON
Red ON 0.5 / OFF 2.5
Red ON 0.5 / OFF 0.5
Green ON 0.5 / OFF 2.5
Green ON 0.5 / OFF 0.5
Red/Green flashing
intervalat 0.5 sec
Red/Green flashing
intervalat 1.5 sec
Red ON
Red ON
Green ONOrangeOn
(Green/Red)
FW update
1sec ON /
1sec OFF
0.5sec ON /
0.5sec OFF
0.25sec ON /
0.25sec OFF
5 LED flashing interval
0.5 sec to right and left
OFF OFF
Continuous / Event REC
Standby (N)
In detect a Shock (E)
Parking REC(P)
Parking REC
standby
No micro SD Card
(including an error)
Driving/Event REC
MenuMenu FunctionFunction
Live Live Image
Quick Menu
Time Set
System Set
MenuSetting Menu
MuteVoice REC ON/OFF
Voice GuideSpeaker ON/OFF
Time Set Set Time on Winner
Play List
Driving/Parking REC
Playback List
N(Driving), P(Parking) REC
Standard TimeSet Set Standard Time
Summer TimeSet Summer Time
OSD OSD On/Off
Cut Off Voltage
Set voltage for car constant power discharge
Front LEDLED On/Off
Auto LCD OffNormally off after 30sec / on 60sec
TV-OUT Set TV our format (OFF/NTSC)
High Temp Cutoff
Speaker Volume
Set High Temperature Cut off
Set Speaker Volume
REC Set
Others
REC CH
Memory Adjustment
Camera SetCamera Set
Set REC Mode
Adjust REC Folder Capacity Rate
Adjust Brightness, Contrast, Chromaon Camera
Set REC Channel
Front Video Quality Set Front Video Quality
Rear Video Quality Set Rear Video Quality
Mic Volume Set REC Volume
Shock Level(N) Set Shock Sensor Level (Driving)
Shock Level(P) Set Shock Sensor Level (Parking)
Motion Level Set Motion Sensor Level
System InfoDisplay System Information
SD Card FormatFormat Micro SDCard
Touch Calibration Calibrate Touch Screen
Factory InitInitialize Configuration
OFF ON
Front Camera
GPS LED
REC LED
Speaker Reset
Security LED
Mic
SD Card Slot
Power Button
GPS
Connection
Power Connection
Rear Camera Connection
(TV-OUT)